748b241afb
Export softc.
1999-11-13 13:40:28 +00:00
5f4088eb26
Hide function definition within ifdef's is becomes active in.
1999-11-12 19:11:25 +00:00
f9bf746086
(cardbus_attach_card): don't free cc
1999-11-12 18:18:38 +00:00
4278cf451e
if the image size is zero, assume it really means one block
1999-11-12 18:17:36 +00:00
4bdf6bd731
Call mii_down() as appropriate.
1999-11-12 18:14:17 +00:00
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
1c37111492
Identification of DOMEX PCI-SCSI board, by Thilo Manske, PR 8772.
1999-11-12 12:03:32 +00:00
0d2fabdf26
A number of stylistic changes to increase readability (many suggested
...
by Nick Hibma):
use NULL not 0
declare all local definitions static
rename s/usbd_request/usbd_xfer/ s/reqh/xfer/
rename s/r/err/
use implicit test for no err
KNF
1999-11-12 00:34:57 +00:00
c8ad47986a
Regen.
1999-11-12 00:26:39 +00:00
505ab77387
Add a modem from ELSA.
1999-11-12 00:26:13 +00:00
3981e235b7
Zero is a valid value for ch_tcor and ch_rcor, so be a bit more conservative
...
when deciding if the baud-rate should be changed. (Spotted by Bruce Martin)
Also fix the mask used when setting the Rx FIFO threshold to zero. I don't
yet understand how the Rx side worked with the code as it was. ;-}
1999-11-11 09:38:43 +00:00
445d6f8e64
Regen.
1999-11-10 19:47:39 +00:00
f2725f06b8
Add another Quickcam.
1999-11-10 19:46:40 +00:00
3bc4cec200
allow to set multiple keyboard "variants" simultanously.
...
Follows PR kern/8456 by Michael Eriksson <eramore@era-t.ericsson.se>,
implemented diffently.
1999-11-10 16:49:38 +00:00
391c8e434d
regen
1999-11-10 15:56:39 +00:00
805b56adb4
Add Entrega USB Serial->DB9 widget
1999-11-10 15:55:51 +00:00
0c76b12125
Give lp->d_type a value other than 'unknown'. When the model is "ST506",
...
the d_type field becomes DTYPE_ST506, otherwise it will be set to DTYPE_ESDI.
1999-11-10 14:11:34 +00:00
8276207b08
Regen.
1999-11-10 12:31:31 +00:00
8436192416
Add two more devices.
1999-11-10 12:31:01 +00:00
f8934aa2f6
Modification to the previous:
...
We still have to preload the command, when selecting without ATN. (We could
probably avoid this by being more careful in the interrupt handler...)
1999-11-10 05:02:53 +00:00
58fec0d55a
When sending a REQUEST SENSE, do *not* attempt to create an I_T_L nexus. This
...
is technically wrong, and some targets (like my 4x NEC CD-ROM drive) misbehave
when we do.
1999-11-10 04:21:30 +00:00
105a2438f9
Fix an obvious bug is some diagnostic code; we must lower our spl again...
1999-11-10 04:19:59 +00:00
5b75863870
A residual after select with DMA step 2 is legitimate (in fact, *not* having a
...
residual would probably be cause for concern), so don't spew about it.
1999-11-10 00:42:37 +00:00
e9fc8103ca
Make detach wait for interrupts to finish.
...
Bail out in interrupt routine when device is dying.
1999-11-09 16:52:14 +00:00
3ea93b7669
Make sure to call vdevgone() on all devices when deteching.
1999-11-09 16:50:47 +00:00
c7cca9cd39
make this compile with CARDBUS_DEBUG
1999-11-09 15:03:59 +00:00
dea88f1c20
Completely rewrite receive processing to avoid sleep-deprivation-induced
...
brain damage and infinite loops, and lousy RTTs
Also, flush tx queues when reassociating with AP and when taking the
interface down.
1999-11-09 14:58:07 +00:00
e54d837b8b
Maintenance CardBus/PCI extension ROM mapping routine.
...
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
2924b6835a
Fix errors in sfb_copycols() of the forward (left-to-right) case.
1999-11-09 08:25:31 +00:00
3949e74f78
If we have a choice: do not trust the parity disk for read
...
balancing in a RAID 1 set if we know that the parity might not
be up-to-date. Thanks to Thor for bringing this to my attention.
1999-11-09 03:07:20 +00:00
1b686307cb
correct number of BAR:s in cardbus_cis_info
1999-11-08 20:21:24 +00:00
fe2d79ec9a
Let decode_tuples take function to call for each tuple, and use this
...
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00
dbb2685da6
add some bare-bones CIS information to the attach_args struct
1999-11-08 19:59:08 +00:00
f6be3b394d
regen
1999-11-08 19:57:32 +00:00
19ff47781e
copy xircom entries from pcidevs
1999-11-08 19:57:13 +00:00
1cfdb728d0
avoid touching freed mbuf after allocation failure.
1999-11-08 15:56:16 +00:00
66ab262b1c
add a bunch of debug printfs under IFF_DEBUG and IFF_LINK2;
...
turn on IFF_DEBUG to trace the management protocol goo.
turn on IFF_LINK2 as well to see beacons.
1999-11-08 15:45:00 +00:00
94bb856781
misc cleanups; seems to work a little better in a dense-AP environment now.
...
1) ignore probe requests rather than printing "unknown mgmt subtype"
(cosmetic)
2) don't panic if mget of the 2nd mbuf in a chain fails (patch from MCR)
(though that whole function badly needs to be rewritten)
3) be a little more tenacious about hanging on to an access point.
1999-11-08 13:24:00 +00:00
9cec807b1c
Return -1 from wsmux_displayioctl() if no muxes components like the ioctl().
1999-11-08 10:10:25 +00:00
0c1542d9a4
Apply wrstuden's stopgap change to make alpha/macppc X work without wsmux.
1999-11-08 04:48:18 +00:00
8567277ae0
Print range of all iospaces or all memspaces if their length aren't zero.
1999-11-07 07:44:21 +00:00
b4560adaf2
regen
1999-11-07 07:03:08 +00:00
7867af6cfb
back out rev 1.166:
...
(1) the list added isnt' complete and i'd call it incorrect. (There are
other devices with these names, where were omitted. I've never seen
the devices with these IDs, I _have_ seen the other devices that go
by these names.)
(2) the PR (8754) had not been updated to note that the problem was
fixed, and i'd preiously asked the submitter for more information and/or
a corrected list.
1999-11-07 06:59:46 +00:00
8be740541b
Extract MAC address from CIS data in pcmcia front end.
...
Fix multicast address manipulation.
ipv6 now works through this driver.
1999-11-06 16:43:53 +00:00
b2a56ee1b9
regen.
1999-11-06 13:50:02 +00:00
080ff79d14
Add vendor/product entry for Auravision VxP524 PCI Video Processor.
1999-11-06 13:48:29 +00:00
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
6f961bbe31
It's okay for a memory region to be larger than it's alignment.
1999-11-06 06:20:53 +00:00
6b2ae05f21
Possible typo.
1999-11-06 01:01:20 +00:00
soren