cleanup error handling on mode change failure.
TODO: non-IPv4 kernel support should be improved. "netstat" should be okay,
"inet.ip" and "inet.icmp" needs more trick.
NetBSD PR: 9157
IPv6 is supported by filters (":ignore ssh") as well.
TODO: do something about line truncation?
TODO: inet6.icmp6? ":help" will not fit into single line...
.Sh SEE ALSO
rather than:
.Sh "SEE ALSO"
The former is the correct form, and it makes a (barely persceptible)
difference in formatting for some output devices (e.g. 'ps').
password map was split and master.passwd.byname was introduced.
XXX This is a temporary fix until luke finds some time to add
the necessary support glue to libc for TRT.
bottom is reached, clear the remaining lines, lest there be stale process
entries if the process list shrinks.
* Implement a top(1)-like `user' command in the ps display.
that `systat doesn't handle errors'. Second off, errx should not be used directly, since
the terminal should be cleaned up before bailing. Third off, whatever we do we need
to be consistent.
There, I feel better now.
1.) fix a bug which caused coredumps when starting with no mode arguments
2.) move to table-lookup for mode-specific command parsing as well.
all command matching is now table-driven.
int overflow. It's now possible to add/display quotas of more than
4G.
XXX I'm sure there is a PR open on this but I couln't find it with the
usual search engines. If someone knows it's number ...
Vastly simplify handling of mode switches, and short-syntax interval
changes. Substring matching of mode names and commands will come
shortly, however the previous method of substring matching modes (it was
not available for commands) is currently not working.
TODO: implement table lookups for mode-specific commands.
table lookup. This will make prefix matching and so on easier.
Expect a similar change for mode-specific commands before too long.
While there, rename some structures with misleading names.
Watch this space for more changes soon.
long struct name.
XXX There are a lot of static arrays in there, bounds should be checked
XXX more carrefuly. All of them seems big enouth (>100) for normal use, though.
setuid telnet(1).
i'm not sure why it is here (maybe someone reused this code from
other setuid'ed program, or someone cut-and-pasted the code from
somewhere else?), it was from revision 1.1 (= 4.4BSD).
briefly discussed in: tech-net?
Problem noticed/debugging assisted by giles lean <giles@nemeton.com.au>.
XXX: rate limiting with chunked xfers might not limit correctly (i.e,
the limit may be too high or too low); fixing this is non trivial,
and will probably occur if i ever rototill fetch_url()
the WHOIS service, again. New target: whois.networksolutions.com
This program should be replaced with one that does WHOIS++ so that it
can hit all the registries for data.
* fix bug where the second press of <TAB> on an empty word (i.e, list
all options) may have resulted in an strncmp() against NULL. (detected
by _DIAGASSERT())
for listings of the current working directory; some ftp servers don't
like `NLST .'.
[noted by Giles Lean <giles@nemeton.com.au>]
* recvrequest(): treat remote=="" as remote==NULL when calling command().
(to support the above change)
* support `[user@]' in `[user@]host' and `[user@]host[:][path]'.
[based on idea (and initial code) from David Maxwell <david@fundy.ca>]
* `idle' may be invoked without any args
* reformat some comments
* reformat usage string in program and man page
* call updateremotepwd() after successful login, not after successful connect
* always call setsockopt(, IPPROTO_IP, IP_TOS, ) (et al); using #if
defined(IPPROTO_IP) doesn't work on certain foreign systems where
enums instead of #defines are used...
[noted by Matthias Pfaller <leo@dachau.marco.de>]
once per systat invocation, not each time we switch to the bufcache
display.
Fixes core dump noted by Andy Doran when switching back and forth to
bufcache display.
EL_RPROMPT support i added to editline(3).
- allow $FTPPROMPT and $FTPRPROMPT to override defaults for the relevant
prompts
- move `%' formatting code from prompt() to expandbuf().
- implement `%.' and `%c', similar to the same % codes in tcsh(1)
(functionality I added to tcsh nearly 6 years ago), except that `%.'
always does `...trailing' and `%c' always does `/<x>trailing'.
- unknown `%foo' codes get printed as `%foo'
to contain the remote working directory.
- add `set prompt', a user configurable prompt. (defaults to `ftp> ').
the following escape characters a la tcsh(1) are supported: %/, %m,
%M, and %n.
- add global var `username'; used by prompt code
- fix a couple of minor memory leaks
- bump version
standard error, arrange for a non-zero exit status and continue with the
next file. Addresses PR bin/8748.
* GCC vs. ANSI: a cast doesn't yield an lvalue.
* Use MAP_FAILED.
Britain and its colonies eliminated 11 days (not 10), following
September 2, 1752.
From "A.D. 1751. Anno vicesimo quarto GEORGII II. CAP. XXIII.
An Act for Regulating the Commencement of the Year; and for
Correcting the Calendar now in Use.":
"... and that the natural Day next immediately following the said 2nd Day of
*September* [1752], shall be called, reckoned and accounted to be the 14th
Day of *September*, omitting for that Time only the 11 intermediate nominal
Days of the common Calendar;
and that the several natural Days, which shall follow and succeed next after
the said 14th Day of *September*, shall be respectively called, reckoned and
numbered forwards in numerical Order from the said 14th Day of *September*,
according to the Order and Succession of Days now used in the present
Calendar; "
Added a caution note on using cal for very old dates.
Problem mentionned in PR 5215 by John Franklin (franklin@bev.net).
Thanks to Perry Metzger for his comments and for reviewing this man page.
the provided port is a valid number use that rather than trying to do
getservbyname() against it.
fixes a problem on foreign systems noted by Chuck Silvers <chuq@chuq.com>
for a while, but showed up due to recent static poisoning.) Note that although
fmt.c builds against ../mail/head.c, this function never actually gets used.
Following examples show the cases.
% ktrace -f - false >/dev/null && echo wrong
wrong
% ktrace -f - -i /usr/sbin/update >/dev/null
(does not return to command line)
That is, back out last change and restore the roles of parent/child for
ktrace(1). The ktruss(1) stuff still remains.
Yes, ktruss(1) has the problems. Better implementation is expected.
- add `usage'; displays the usage of a command.
implemented by calling the c_handler() with argc = 0, argv = "funcname".
- add `passive auto'; does the same as $FTPMODE=auto.
- add `set [option value]'; display all options, or set an option to a value.
- add `unset option'; unset an option.
- add getoptionvalue() to retrieve an option's value, and replace a few
global variables with calls to this.
- implement cleanuppeer(), which resets various bits of state back to
`disconnected'. call in disconnect() and lostpeer().
- support completing on `options'.
- improve recovery after a SIGINT may have closed the connection.
XXX: there's still a couple to fix
other stuff:
- various consistency fixes in the man page.
- ensure that the command usage strings in the code and man page match reality.
- mput/mget: check that the connection still exists before each xfer.
- minor cosmetic changes in confirm().
- set code correctly in sizecmd() and modtime()
- don't need \n in err() strings.
- change lostpeer to take an argument (rather than casting (sig_t)lostpeer
in signal handlers)
- knf and whitespace police.
only return a header length of 0 if we are using -f (force), not
in the case when we know how long the header is. this stops from
playing the audio header.
* simplify main loop (don't need `top' variable any more)
* use a struct sockaddr_in6.sin6_addr for the result from inet_pton(),
rather than u_char buf[16]
* add a few more comments
* confirm(): move from util.c to cmds.c. display mnemonic string in its prompt.
add support for `q' (terminate current xfer), `?' (show help list)
* in various signal handlers, output a linefeed only if fromatty.
* if fgets(stdin) returned NULL (i.e, EOF), clearerr(stdin) because you don't
want future fgets to fail. this is not done for the fgets() in the main
command loop, since ftp will quit at that point.
* unless ftp is invoked with -a, don't retain the anonftp setting between
hosts (`ftp somehost:' sets anonftp, but you don't want that to `stick'
if you close that connection and open a new one).
stage. if this occurs, just call lostpeer() to close the connection. whilst this
might be considered brutal, it's also extremely handy if you're impatient or there's
lossage at the remote end.
don't save the signal mask on some foreign systems.
* ensure signal handlers don't use stdio and do reset errno if they
don't exit with siglongjmp()
* use a common SIGINT handler for {send,recv}request()
(work around editline's override)
* minor cleanup of signal handler (along the lines of similar work in
recvrequest()). the handlers should now be reset everytime the cleanup
handler was callled.
prints out info if bytes > 0). only set the handler if SIGINFO is defined
* hijack SIGQUIT to be the same as SIGINFO (foreign ports have this, and it's
annoying to have SIGQUIT dump core on netbsd when it prints info on other
systems)
* in {recv,send}request(), factor a lot of duplicated code out into a
`cleanup' section at the end
* rework shell() a bit
* implement xsignal_restart(), which only sets the SA_RESTART flag if
specifically requested
* xsignal() is now a wrapper to xsignal_restart(). INFO, USR1, USR2 and WINCH
are restartable, ALRM, INT, PIPE and QUIT are not.
* improve getreply()'s timeout code to take advantage of the above.
other changes:
* improve wording of how globbing works for `classic' URLs (host:path).
suggested by John Refling <johnr@imageworks.com> in relation to PRs
[bin/8519] and [bin/8520]
* always compile in the `edit' command even if NO_EDITCOMPLETE defined.
it's just a no-op in the latter case, which is more consistent to
the users.
* always compile in about: support (i.e, remove NO_ABOUT).
i'm entitled to some vanity in this program...
* clean up some whitespace
the disabled state can be overridden by toggling epsv4.
(I got sick of the errors about EPSV not being supported on almost
every server I connect to. This way we retain support for epsv4, but
it's not so whiny after the first failure...)
to "extern" if it's not set. define GLOBAL to (empty) in main.c.
this effectively moves all the globals into main.c whilst retaining
namespace access to them in other source files.
(global vars in header files confuse foreign linkers)
should be in host order. found/fixed by Matthias Pfaller <leo@dachau.marco.de>
* parse_url(): improve checking of portnum, and add an extra argument to pass
back the parsed portnum to the caller (reduces a bit of code duplication)
* Move the KAME/WIDE copyrights after the BSD/TNFi ones. Since there was
significantly less code added under the former, it's only fair on the latter.
ETA might be over and will appear to drop rapidly, rather than being under
and appear not to change. the original code makes sense when you're testing
by suspending & resuming the client. however, the unfudged number is probably
better in reality, especially for slow spurty networks.
requested by ITOH Yasufumi <itohy@netbsd.org> in [bin/7977]
lpage page local files
pdir as dir, but through your $PAGER
pls as ls, but through your $PAGER
* implement docase() (a la dotrans() et al) and use appropriately, rototilling
some duplicated code
* globulize(): modify to return a pointer to the strdup()ed result in all cases,
and hack the code that calls it to take this into account
* replace strcpy() and strncpy() with strlcpy()
* put(), getit(): use some aptly named local vars instead of argv[...]
* delint
prototype for idle() in <unistd.h> (which i thought was against namespace
and sensibility guidelines, but...)
* consistently use xsignal() instead of signal(). we get known behaviour
in all cases (SA_RESTART), which is good for some borken foreign systems.
* remove signal.h from most files; it's unnecessary now
* fetch_url(): use `long chunksize' instead of ssize_t; it's more portable, and
we're setting chunksize with strtol() anyway
* xsignal(): only use SA_RESTART if it exists. SunOS 4.x doesn't have it
but has the inverse (SA_INTERRUPT). the original function i was inspired
from had this support (lib/signal.c, W. Richard Stevens' `UNP 2nd ed Vol 1').
* remove <termios.h> from util.c; it should be unnecessary now
prototype for idle() in <unistd.h> (which i thought was against namespace
and sensibility guidelines, but...)
* consistently use xsignal() instead of signal(). we get known behaviour
in all cases (SA_RESTART), which is good for some borken foreign systems.
* remove signal.h from most files; it's unnecessary now
* fetch_url(): use `long chunksize' instead of ssize_t; it's more portable, and
we're setting chunksize with strtol() anyway
* xsignal(): only use SA_RESTART if it exists. SunOS 4.x doesn't have it
but has the inverse (SA_INTERRUPT). the original function i was inspired
from had this support (lib/signal.c, W. Richard Stevens' `UNP 2nd ed Vol 1').
* remove <termios.h> from util.c; it should be unnecessary now
it's more portable and more obvious
* remove the mkgmtime() && HAVE_TIMEGM stuff:
a) why should netbsd have to define HAVE_TIMEGM to compile cleanly?
b) foreign compiles of ftp should just be linked with working
timegm function
a more portable version of this ftp client will be released as a 3rdparty
product; no use polluting our code with half-baked attempts...
* abort_remote(): replace borken MIN(4,BUFSIZ) with just BUFSIZ; it
should have been MAX(4,BUFSIZ), but it's probably safe to assume that
BUFSIZ is at least 3... (fix from simonb)
* auth_url(): use the correct variable when calculating a buffer size.
add lots of comments about how to size up the buffers, and add extra
checks to hopefully ensure that there won't be an overflow (unless
someone modifies the length of the sprintf()s).
* as part of the above, slightly rework the way the `*' bar is calculated.
also fixes a display bug when > 160 stars were needed to be printed.
the maximum progress bar width at this time is 256.
* remove some code that checks the port that was #if 0-ed out as part of the
ipv6 migration; it's not going to be used again.
* document the above three commands
* rototill the way the sndbuf and rcvbuf work. remove resetsockbufsize()
* use the appropriate socket buffer size as the size of the buffer that
the read()/write() loops use. speeds up things in some cases.
list of target nodes returned by Make_ExpandUse(). We have to search the
cohorts explicitly while iterating through the tree. So, tweak CompatMake()
to do this.
can (i.e., everything except environment variables, which aren't
stored in hash tables).
While we're here, inline the body of VarDelete into Var_Delete since
it's the only caller and it's just simpler that way when v->name can
share storage with the hash entry and may not need to be freed
separately.
Speeds up the infamous libc build benchhmark maybe 1% on PIII, 4% on
alpha pc164
Suggested by Perry Metzger.
Build a list of `cohorts' as before, but do *not* link each one into all the
parent nodes; instead, copy the `cohort' lists into the stream of targets to
be built inside Make_ExpandUse(). Also do the attribute propagation as a
separate pass after parsing.
This eliminates several O(n^2) algorithms.
passing in the LstNode of the child being inspected. Shaves off another few %,
particularly when there are long child lists containing $ expansions (e.g. in
libc).
* Treat search patterns as BREs only, per 1003.2 and XCU5.
* Do not perform any special treatment when an unqoted * or @ is given as
the first character of the search pattern.
Addresses PR bin/8269 by Chris Demetriou.
connection destination, hoping this to help ftpd's behavior with
scoped IPv6 addresses.
I'm not sure if it is the right way, but it is the best way available to us.
LPRT or EPRT command gives no information about which interface (or scope)
to be used for new data connection.
ftp(1): On data connection establishment, warn if scoped address is used.
If peer (ftp daemon) does not handle scoped address, data connection
may not work right.
This seems to be sort of protocol spec hole, not implementation issue.
a malloc'ed pointer and it tries to realloc(3) it if it had to grow it
before. su(1) gave it a pointer from the stack which caused realloc to
core dump.
- just display the hostname:port of the proxy url, rather than the full url.
this prevents someone `shoulder surfing' a proxy username/password
in $http_proxy. [suggested by perry]
- compact verbose notes for http fetchs; now displays
(via host:port, with authorization, with proxy authorization)
with each component being optional.
(and a couple introduced with the ipv6 mods...)
- don't override host with the canonical name; this prevented fetches from
http/1.1 virtual hosts from working if the virtual host was a CNAME.
[noted by bernd]
- call freeaddrinfo() if res was built with getaddrinfo()
some of them are caused by the kvm_getfiles() implementation being
TOTALLY BROKEN for dead kernels. Print out the KVM descriptor's
error so that error causes are more easily diagnosed.
itojun