Under some circumstances, ${TOOL_CAT} may refer to an executable
that does not exist. As a stopgap fix, use cat(1) instead of
${TOOL_CAT} in emit_dist_file.
that assembles /etc/mtree/NetBSD.dist. Instead, use the Makefile's
new target, emit_dist_file, to assemble the correct NetBSD.dist.
Previously, 'postinstall -m amd64 -s $SRC_TOP' would install a
NetBSD.dist that was missing /usr/lib/i386/ et cetera.
in this situation caused the contents of ${.CURDIR} to be cat'ed
into the generated NetBSD.dist mtree spec file, resulting in
${DESTDIR}/var/yp/binding/<garbage> being created, causing set list
check failure at the end of the build.
- we now only create them when building X11, and only create the ones
we need (X11R6 xor X11R7)
- all these subdirs are now in the xbase set
- move the logic for running mtree into etc/mtree/Makefile
- split NetBSD.dist into 3 files, and have the build and postinstall handle
creating a possibly merged one. we still have a single installed file
called "NetBSD.dist".
gnulib, the implementation goes back to the AMD Software Optimizer
guide. A number of platforms will want to replace the C version with
assembler code using native instructions.
The algorithm used is the Jenkins hash. The name (mi_vector_hash)
reflects the nature of the hash function.
Add glue for libc ATF tests and include a test case to make sure that
(mis)alignment and endianess are handled correctly.
Bump libc minor to 169.
first, mount root and run the various disk providers. Add swap and
check the remaining file systems after that.
This breaks the dependency cycle for lvm, which needs writeable /dev.
Depend on rndctl in cgd.
ok'ed by core and releng.
(thanks for agc@, snj@ and i'm sorry for long time patience).
[libc]
- localeio.[ch] and lc*.[ch] in src/lib/libc/locale was replaced by
new locale-db implementation using citrus_db backend,
see src/lib/libc/citrus/citrus_lc_*.[ch].
- add citrus_bcs_strtou?l.c. don't use strtou?l locale implementation
internally, because they're locale-aware function.
- add some stubs for multi-locale issue, see {current,global}_locale.c.
- remove some obsolete file, setrunelocale.c, ___runetype_mb.c.
- remove __savectype() from ctypeio.[ch].
[tools]
- mklocale(1): add new option ``-t'' that generates new style
LC_{MONETARY,NUMERIC,TIME,MESSAGES} locale-db format.
- chrtbl(1): added ctypeio.[ch] for __savectype().
[locale-db]
- added en_US.US-ASCII locale.
- removed some shareable locale definition file:
en_US.US-ASCII -> en_US.ISO8859-1, en_US.UTF-8
zh_CN.eucCN -> zh_CN.GB18030
and more...see src/share/locale/*/Makefile.
- remove obsoleted locale sr_YU, added new locale sr_ME, sr_RS.
- change locale name ja_JP.ISO2022-JP* -> ja_JP.ISO-2022-JP*
for X11's locale.alias file alignments.
- fix regression test, wrong wcs?width(3), NAN/INF usage.
i tested release-build following arch:
i386, amd64, hpc{mips,arm,sh}, sparc64, vax.
citrus_lc_*.[ch] also can read old-plain-text style locale-db.
so that backward compatibility is keeped, but lc*.[ch] can't read
new citrus_db'ed locale-db and localeio.c never check sanity,
so forward compatibility is broken ;-<
old mklocale(1) doesn't know -t option, so you have to rebuild toolchain.
- Make MD poffd(8) retire, and use MI powerd(8) instead of it.
- Make /dev/pow1 retire, because nobody holds /dev/pow0 any longer.
Use /dev/pow0 for pow(4) ioctl.
- POWIOCSSIGNAL ioctl which is for poffd(8) is also obsoleted.
private non-installed build infrastructure from sys/rump.
breakdown of commit:
* install relevant headers into /usr/include/rump
* build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern
from src/lib and install as librumpuser and librump, respectively
+ this retains the ability to test a librump build with just the
kernel sources at hand
* move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib
for general consumption, they are not kernel-space dwellers anyway
* build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs
* add chapter 3 manual pages for rump, rumpuser, ukfs and p2k
* build and install userspace kernel file system daemons if MKPUFFS=yes
is spexified
* retire fsconsole for now, it will make a comeback with an actually
implemented version shortly
btuartd(8) should be named btattach(8) for consistency
with other parts of NetBSD
make btattach(8) a single-use tool for less complexity
device specicific initialisation (from btuart(4)) is carried
out prior to activating the line discipline (in btattach(8)),
which simplifies the API somewhat and means that the user
tool and the kernel do not need to be kept in sync.
btuart(4) driver is much reduced; naming is made consistent
and all tsleep() and delay() are removed to userland
This change converts all the existing regression tests in regress/games
to the new framework provided by atf. As a side effect, this also moves
all the tests programs in regress/games to tests/games.
This change converts all the existing regression tests in
regress/sys/fs/tmpfs to the new framework provided by atf. As a side
effect, this also moves all the tests programs in regress/sys/fs/tmpfs to
tests/fs/tmpfs.
This change converts all the existing regression tests in regress/bin to
the new framework provided by atf. As a side effect, this also moves all
the tests programs in regress/bin to tests/util, as they all belong to
utilities installed by the base-util-root package.
This adds a new tests.tgz set to releases which includes all the tests
for the system. It is important to note that this set does not rely on
comp.tgz: a user of the system can run the tests without having the
development tools installed, which can be useful in a production machine.
This change adds the ATF manual pages that are not tied to any specific
tool nor library. It also adds some distribution documentation to the
system, as this is linked to by the manual pages (plus we have to install
the license text to comply with its terms).
This adds reachover Makefiles to build the libatf library and enables it in
the parent Makefile.
Things to review in this change:
* Add proper version numbers in the shlib_version files.
* Is libatf properly listed in lib/Makefile? It theoretically needs
libstdc++, but the resulting binary library is not linked against it.
(Part 4: documentation and configuration files)
* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.
Tested by:
blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).
Enabled via per_user_tmp in /etc/rc.conf (default off).
See security(8) and rc.conf(5) for more details.
Lots of input from thorpej@ & christos@, thanks!
remove pseudo-device btdev(4) and inherent limitations
add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.
btdevctl(8) and its cache is updated to handle new semantics
etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf
Big5-2003, Big5-ETen, Big5-IBM, Big-5E, Big-5+.
``Big5 is now the alias of Big5-ETen,
if you want Unicode.org's obsolete mappings, use Big5-IBM instead.
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.
The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.
Drivers for both PCMCIA and USB bluetooth controllers are included.
derive IP address(es) from the interface (e.g "... from any to fxp0").
This however, creates window for possible attacks from the network.
Implement the solution proposed by YAMAMOTO Takashi:
Add /etc/defaults/pf.boot.conf and load it with the /etc/rc.d/pf_boot
script before starting the network. People who don't like the default
rules can override it with their own /etc/pf.boot.conf.
The default rules have been obtained from OpenBSD.
No objections on: tech-security
appeared and whether it's really part of pf or not is still unclear. Looking
at the other *BSDs it seems that they have left out spamd when importing pf,
and now we do that too. Also, the name conflicted with another more popular
used tool, after the rename to pfspamd it was left with completely unusable
documentation which apparently no-one wanted to fix.
A port of the latest spamd will be imported into pkgsrc soon.
Suggested by several people, no objections on last proposal on tech-userlevel.
* End user modifiable configuration has moved from
/usr/X11R6/lib/X11/<someprog>
to
/etc/X11/<someprog>
This is consistent with our own policies as well as other projects.
The files & directories that were moved have _NOT_ been marked
`obsolete', as they contain user configuration and therefore we
don't want the automatic "obsolete file removal" mechanism to
remove them.
* The /etc/font/* and /etc/X11/* configuration files are installed
with 'configinstall' (not 'install'), using CONFIGFILES and
CONFIGSYMLINKS.
This is so that a normal 'make build' in src/x11 will not
trash your configuration.
* A 'distribution' target has been added to src/x11 to perform
'make configinstall' in the appropriate subdirectories.
(Should we consider making 'configinstall' a first-class target?)
* The xdm pixmaps have have been moved to /usr/X11R6/include/X11/pixmaps
where the other pixmaps are.
(I don't consider these pictures end-user configuration).
IMPORTANT NOTE:
* These changes require an up to date xsrc, and 'make cleandir' should
be performed in src/x11 before a build for the changes to fully take
effect.
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.
XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.
(All paths are relative to usr/X11R6)
* Obsolete:
bin/fontconfig-config
* Add directories:
lib/X11/locale/zh_CN.UTF-8
lib/X11/xkb/geometry/ibm
* Rename include/freetype2/ft2build.h to include/ft2build.h and obsolete former
* Add files:
fonttosfnt(1) program & man page
include/expat.h
lib/X11/app-defaults/XClock-color
lib/X11/fonts/TTF/Vera*.ttf
some font encodings
zn_CN.UTF-8 locale
some font encodings
various xkb config files
lib/X11/xedit/lisp/progmodes/patch.lsp
Xfontcache(3) and various links
XDGA(3) and various links
XRes(3) and various links
Xss(3) and various XScreenSaver*(3) links
* Add some more TODO items
* Clean up lib/expat build now that the version is hard coded.
Use /var/db/obsolete instead of /etc/obsolete
etc/Makefile:
Create separate target "install-obsolete-files" to populate
/var/db/obsolete, instead of using "install-etc-files".
Makefile:
Add do-obsolete target, to run "cd etc && make install-obsolete-files",
and add this to BUILDTARGETS.
This moves the "obsolete files" creation from "distribution" to "build".
Per discussion with Andrew Brown.
* Improve message display in find_file_in_dirlist()
* do_obsolete(): instead of running distrib/sets/makeobsolete to
temporarily generate the obsolete sets lists, look for them in
${SRC_DIR}/etc/obsolete/* or ${DEST_DIR}/etc/obsolete/*.
The obsolete check now works for "extracted etc.tgz" as the source dir.
etc/Makefile (install-etc-files), distrib/sets/lists/*
* Install obsolete set lists into /etc/obsolete/
* Tweak how pwd_mkdb files are added to METALOG
distrib/sets/makeobsolete
* Don't bother with "_obsolete" suffix on generated file names.
The old behaviour caused problems when /home is a symlink on a system
and pax is used to extract base.tgz or "installworld" the base set
(because pax will remove the symlink before creating the now-empty
directory). It also made it more difficult for a site that wants
permissions on /home to be something other than what the NetBSD
defaults are.
For sites which want /home, it's a "once off" operation to create it,
and "useradd -m" (with the default "base-dir" of /home) will create
it anyway.
This resolves PR [install/19673], as well as being more consistent
with our defacto policy of "not stomping on stuff we don't need to".
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
raid[0-9].conf & raid[0-9][0-9].conf
report. This file is expected to change daily, and this is not a security
problem. (Also, the most recent dumps are already shown in the daily report.)
"/etc/ssh/ssh_config" (from "/etc/ssh/ssh.conf") for ssh(1) and other
userland tools, and "/etc/ssh/sshd_config (from "/etc/ssh/sshd.conf")
for sshd(8).
etc/postinstall will detect this, and if "fix" is given, rename the files.
make -V FILES
from being useful (and given that every other variable can be
extracted using make -V, the behaviour was unusually inconsistent
given that the original reason for clearing it doesn't seem to be
relevant anymore)
- use <bsd.prog.mk> instead of directly including <bsd.files.mk>
(and possibly <bsd.man.mk> or <bsd.own.mk>)
- remove obsolete NOPROG
christos