d8b52eec28
support running /etc/rc.shutdown.local
2000-08-21 23:33:06 +00:00
ce3ce86261
migrate raising of securelevel from sysctl to separate securelevel script.
...
the latter depends upon aftermountlkm (but is required by DAEMON), so that
lkms may be loaded before the securelevel is raised.
noted by Rafal Boni <rafal@mediaone.net> in [bin/10780]
2000-08-21 23:31:24 +00:00
49533ad06e
don't start rc.d scripts with a `nostart' keyword
2000-08-21 23:09:50 +00:00
4e283949d1
remove rc.wscons
2000-08-21 23:07:11 +00:00
0c020b6812
migrate guts of these /etc/foo.conf config files into /etc/default/foo.conf,
...
and source the latter in the former. this makes it easier for a sysadmin to
upgrade the default files without affecting local config, and retains the
semantics that the /etc/foo.conf files are the actual files that are edited
(as opposed to /etc/foo.local.conf or /etc/foo.conf.local or whatever, which
isn't as intuitive).
2000-08-21 23:06:22 +00:00
801142dbde
- install files in etc/default/
...
- migrate rc.wscons to (already existing) rc.d/ wscons
2000-08-21 23:03:10 +00:00
09251753f6
migrate rc.wscons to (already existing) rc.d/wscons
2000-08-21 23:01:36 +00:00
cbba2db233
migrate default installation config files from /etc to /etc/default
2000-08-21 23:00:26 +00:00
aeebc796f0
add etc/default
2000-08-21 22:57:24 +00:00
54049fb460
remove rc.wscons
2000-08-21 22:57:11 +00:00
31a6224745
Move options into ntp_flags, to make it possible to add '-u' without
...
modifying rc.d/ntpdate
2000-08-21 14:48:39 +00:00
4c835d91f6
add ramdisk support
2000-08-20 14:48:32 +00:00
a96d29c7e3
support ${name}_nice even when using ${name}_chroot. per discussion with mrg...
2000-08-19 08:47:43 +00:00
31bec2bf20
Add lpt and com
2000-08-17 14:13:41 +00:00
0847f3e3f5
add support for ${name}_chroot, which chroot(8)s before running the command.
...
allow changing the user credentials to ${name}_user, ${name}_group,
and ${name}_groups as part of this. if ${name}_chroot is used, the following
variables won't work: ${name}_chdir and ${name}_nice.
[requested by mrg; whipped up in a few minutes on his terminal :-]
2000-08-17 11:07:10 +00:00
b1253dc369
synchronize with /etc/mail content.
...
NetBSD PR 10836 from koji@jp.above.net .
2000-08-15 14:48:23 +00:00
7342dfee1d
reorder "localhost" entry, to prefer ::1 than 127.0.0.1.
2000-08-15 09:33:05 +00:00
d2e1f953ef
make that "audio*" not "audio".
2000-08-13 15:37:09 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
8ecc16e026
Add the coda services.
2000-08-11 23:25:34 +00:00
01c441e0c2
Fix device creation for SCSI tapes.
2000-08-11 19:19:03 +00:00
e36c17d6c2
Have port-i386 use installation/floppy, for conformance with release(7).
2000-08-11 09:20:38 +00:00
5007ab036b
- sshd has a pid file, so take advantage of it
...
- support `reload' arg (using default of SIGHUP)
2000-08-10 22:49:43 +00:00
690a071d43
Need bsd.own.mk
2000-08-10 22:02:07 +00:00
0b1677de5f
- provide sshd not ssh
...
- don't start until after LOGIN (after NETWORK is way too early)
- KNF (as such :)
2000-08-10 01:41:09 +00:00
64fe1807a8
remove xy & xd support.
2000-08-09 10:54:20 +00:00
26aeddad0c
Add `swat' (Samba Web Administration Tool) services at 901/tcp.
2000-08-08 03:10:50 +00:00
81958d9213
Add kdc/kdc_flags variables.
2000-08-06 21:34:17 +00:00
f0c5d26a40
Startup script glue for the Heimdal KDC.
2000-08-06 21:32:56 +00:00
6636b19ffd
Add (commented out) hprop service, along with a short explanation
...
of when to enable it and why.
2000-08-06 20:35:13 +00:00
eb8931bc84
Add `hprop' service (754/tcp).
2000-08-06 20:12:19 +00:00
4ed8b47725
Do not create the binary/security directory, there is no seperate
...
security set anymore.
2000-08-06 18:10:48 +00:00
4bfab7fc50
/var/krb5kdc -> /var/heimdal
2000-08-06 17:15:47 +00:00
7a41932873
for make snapshot
2000-08-06 16:11:32 +00:00
ac1bd4275a
Remove the (not supported) krbupdate service, and add (commented out)
...
kerberos-adm.
2000-08-05 00:48:15 +00:00
75713daa92
Add ISAKMP.
2000-08-03 22:58:37 +00:00
a8c7e91153
As discussed with Hubert Feyrer in private mail, install UTC as the default
...
time zone; while amounting to the same offset, the time zone 'name' of
Factory violates the prinicple of least surprise.
2000-08-03 13:00:02 +00:00
343777f0d3
Change default timezone from US/Pacific to Factory:
...
Before:
Wed Aug 2 06:53:04 PDT 2000
After:
Wed Aug 2 13:52:52 Local time zone must be set--see zic manual page 2000
2000-08-02 14:40:45 +00:00
e9b5e5d87c
fix comment on DAD wait
2000-08-02 13:59:11 +00:00
dcefdf7722
Adjust comment to what's actually being done
2000-08-02 11:07:51 +00:00
8451f00774
we need to sleep for IPv6 DAD period, before and after rtsol.
...
(they are for stability in boot-time configuration)
comment from perry.
2000-08-01 20:49:11 +00:00
d6662ec62f
Change name of precmd from start_precmd to sshd_precmd. While it worked
...
fine as was, the result was the line `start_precmd=start_precmd' which
looked odd. Pointed out by Bernd Ernesti.
While here, add NetBSD RCS Id.
BTW, to clarify, as people have asked: this script does not support
pkgsrc/security/sshd -- that package comes with a perfectly fine rc script
which in addition to supporting /etc/rc.d can also be used with 1.4.X.
This script will not trivially work with the ssh package as it a.) calls
the ssh commands at the pathnames they will be installed at by usr.bin/ssh,
and b.) generates a DSA key as well as an RSA key.
2000-08-01 14:28:32 +00:00
f3983ea4df
Correct apparent past-o: RSA -> DSA
2000-07-31 21:43:52 +00:00
5da8f604df
Add $sshd and $sshd_flags for use by both usr.bin/sshd and pkgsrc/security/{open,}ssh
...
As a precedent, note the presence of $gated, even though we do not distribute
gated outside of pkgsrc.
2000-07-31 20:47:41 +00:00
5cfec6f11d
An sshd startup script for use with usr.bin/sshd. Installation is conditional
...
on ${SSHDIST}, as with usr.bin/ssh itself.
This script includes a `keygen' target for regenerating RSA and DSA host keys,
and invokes this if these keys are not present when sshd is started up.
2000-07-31 20:39:41 +00:00
fcf381833d
actually make use of new features introduced in man.c (rev 1.23):
...
allow to specify relative paths for sections in man.conf - they are used
similarily to _subdir, but only when appropriate
2000-07-31 00:26:48 +00:00
c438e69177
if update_motd is set, do not gratuitously force it to have an empty line
...
in it. also be a bit smarter about deleting stuff from motd during
update. it is now possible to have a one line motd just like in SunOS.
2000-07-31 00:17:05 +00:00
ea8a88f609
syslog requires databases from sysdb which creates /var/run/utmp.
2000-07-29 21:50:20 +00:00
d13496d33e
md0c -> md0d.
2000-07-29 10:56:19 +00:00
023a7f381f
add back check to .rhosts cat -f avoids the security hole.
2000-07-28 21:38:43 +00:00
2ff2883ec7
pty{0,1} created more than once for "floppy" target. Corrected.
2000-07-27 19:16:09 +00:00
3e53e60091
Really, we don't need a 2nd pty0 in the floppy target.
2000-07-27 19:09:57 +00:00
12fa1acae3
As before, make 64 PTYs default. Forgot to move updated version back after
...
moving it aside to commit fix to previous version, prior to larger commit.
2000-07-27 18:46:15 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
d123ebaad1
Correct typo - missing $0.
2000-07-27 18:41:34 +00:00
392130e304
move recreating /var/run/utmp from mountcritlocal (where /var/run is
...
purged but /usr/bin/install is not available) to sysdb.
problem noted by Matthias Drochner.
2000-07-27 13:58:49 +00:00
0e416c083c
add usr.bin/{hoststat,purgestat}, which are new argv[0] hack
...
for sendmail 8.10.x and beyond. sorry that i forgot to add this one.
From: Andrew Brown <atatat@atatdot.net>
2000-07-26 16:35:33 +00:00
48b9eee5e1
* add new dummy dependancy `NETWORK' to be REQUIREd by services which need
...
networking to be operational before starting, and use as appropriate.
NETWORK depends upon network and dhclient.
* move the guts of systemfs into mountcritlocal
* replace the dependancy on systemfs with mountcritremote, and remove the
former.
* SERVERS now also depends upon ppp
Notes:
* dhclient (and others) needs /var to be a $critical_filesystem_beforenet
* dhclient now starts before syslogd (because the latter needs /usr, and
/usr might need dhclient to be mounted)
Should fix PRs:
[install/9853] [bin/10002] [misc/10349] [port-i386/10633] [misc/10641]
2000-07-26 00:11:48 +00:00
fe54e81eb3
Also do ../usr.bin/ssh for the `distribution' target.
2000-07-25 19:07:39 +00:00
1bf05ae3b1
the format without netmask is supported for compatibility only and not
...
specifying it is discouradged, actually
also add comments about this fact to etc/rc.d/network, for people who
don't read manpages :)
2000-07-25 18:47:28 +00:00
6c44b52470
add usr/share/wscons/{fonts,keymaps}
2000-07-25 17:20:13 +00:00
8ba3198bec
the pcvt fonts are in /usr/share/wscons/fonts now
2000-07-25 17:14:58 +00:00
674467bac8
add "start" argument to sshd.sh.
...
- sshd.sh comes with pkgsrc/security/openssh requires "start" argument
- sshd.sh comes with pkgsrc/security/{ssh,ssh6} does not care about argument
- it seems to me, from license twists, openssh installation will get
more popular
2000-07-24 10:10:05 +00:00
a2c0644e20
Add a Makefile.inc with snap_md_post to build and install release notes
...
for a make release or make snapshot.
2000-07-22 02:33:53 +00:00
5d1a00b125
Add a snap_md_post to build release notes and boot floppies on a make
...
release or make snapshot.
2000-07-22 02:33:06 +00:00
1a54e63fe1
match reality WRT rc.d...
2000-07-22 01:50:30 +00:00
e15f7a2a6f
clarify the difference between $critical_filesystems_beforenet and
...
$critical_filesystems, and why `/var' should be in the former (or
implied as part of `/' which is already mounted).
2000-07-22 01:09:44 +00:00
d3f42e569d
add some kerberos related ports
2000-07-22 00:26:42 +00:00
1a29746222
- fix typo; the first ipsec_start() should be ipsec_prestart()
...
- if ipsec.conf isn't readable and the system is booting directly to multiuser,
send SIGTERM to the parent (/etc/rc) so that init(8) aborts the boot.
2000-07-21 01:16:07 +00:00
262e4b1975
if ipf.conf isn't readable and the system is booting directly to multiuser,
...
send SIGTERM to the parent (/etc/rc) so that init(8) aborts the boot.
2000-07-21 01:14:23 +00:00
9c7a535df6
- be consistent in formatting sentences
...
- note that xdm might need wscons for local X servers (c.f. [install/9967])
2000-07-21 00:25:31 +00:00
31e7834913
reword description
2000-07-20 23:36:56 +00:00
acae4fe558
in err() and warn() put a : between the ERROR/WARNING label and the message
2000-07-20 23:12:44 +00:00
f5e99478c8
Build a list of cloning network interfaces to configure, as well
...
as normal interfaces.
2000-07-20 19:43:10 +00:00
00a398bd22
New kernel for small systems
2000-07-19 16:49:08 +00:00
47a3878257
reenable stop_cmd now that network doesn't get run at shutdown
2000-07-17 15:25:42 +00:00
db024b3733
add '# KEYWORD: shutdown' so that these scripts get run at shutdown time.
...
now, only scripts with the keyword `shutdown' will be run by /etc/rc.shutdown,
which speeds up shutdown and makes it more robust.
2000-07-17 15:24:48 +00:00
d046f31b64
run rcorder with `-k shutdown', so that only the scripts with a
...
`shutdown' keyword get run at shutdown time.
2000-07-17 15:23:28 +00:00
97d13d02c3
* remove bogus comment about aborting the boot if ipsec.conf doesn't exist;
...
this hasn't really worked and is probably too messy to resolve...
2000-07-17 13:10:54 +00:00
a8b1b91ded
* add support for `status'
...
* remove bogus comment about aborting the boot if ipf fails; this hasn't
been supported since the rc.d migration and is too messy to resolve...
2000-07-17 12:58:14 +00:00
d92b803c29
use "load_rc_config swap" for swap1 and swap2
2000-07-17 12:27:04 +00:00
8086bde7eb
share the same load_rc_config between the lkm* scripts
2000-07-15 02:30:18 +00:00
bafa86ff31
add usr/share/examples/syslogd
2000-07-13 14:24:13 +00:00
1bc309ff6c
- Replace `[ZBN-]' with `flags'.
...
- kerberos.log isn't generated by syslogd(8). Add `N' flag.
2000-07-11 12:41:06 +00:00
1feaf31d56
If MACHINE_ARCH is 64-bit then only build 64-bit kernels.
2000-07-07 23:06:09 +00:00
05ca1d3393
Add /etc/{hesiod,passwd}.conf.
2000-07-06 11:11:16 +00:00
0bfeec5234
sync sendmail default configuration file with GENERIC kernel setting.
...
was: sendmail-IPv6.cf(v4/v6) + sendmail.cf(v4)
now: sendmail-IPv4only.cf(v4) + sendmail.cf(v4/v6)
do we need etc/obsolete.mi?
2000-07-04 12:21:02 +00:00
e0c644c119
Apply same changes done in rev. 1.5 for the entry `hp' which is
...
added in rev. 1.6
2000-07-03 06:11:23 +00:00
9928e1fe95
Fix pr9320: improve umask checking for root's dotfiles.
...
Now even notices bogus umasks like 044
2000-07-02 22:27:47 +00:00
202af8ae4a
Fix typo (enable -> enabled)
2000-07-02 18:18:20 +00:00
becc493865
And let's make some audio devices too. Stolen from port-alpha.
2000-07-01 21:41:41 +00:00
3c57129f75
Clarify comment that inetd only starts up IP-based services *that are
...
enabled in /etc/inetd.conf* (someone asked me last week why NetBSD doesn't
come with a telnet server...)
2000-07-01 20:03:44 +00:00
c76b8a26a9
add "wd" support
2000-07-01 16:27:47 +00:00
ae45dff5fc
GENERIC should run on any environment.
...
It required 6MB of memory; disable some options/devices so that
it can run on 4MB machines.
2000-06-28 15:27:19 +00:00
81a51455cd
Fix brain'o in last, pointed out by Johan Danielsson.
2000-06-25 16:25:33 +00:00
685a0649a8
lm* -> sysmon
2000-06-24 00:43:26 +00:00
1840f1fa18
Allow a higher count of started services for broadcast RPC services. Since
...
rpcbind version 3 and 4 clients will try broadcasts using both the old
and new protocol for IPv4, the double amount of packets may come in,
causing bogus "service looping" events in inetd.
2000-06-22 11:35:13 +00:00
c60ddc2403
remove ip6defaultif configuration. because:
...
- ndp is in /usr/sbin, chokes on NFS-mounted /usr installation
- the option is just for IPv6 specification geek, not for normal users
2000-06-20 16:48:14 +00:00
bd9588d282
Add /etc/netconfig and /etc/security.local.
2000-06-20 15:01:19 +00:00
295358cfe1
Don't warn that $hostname isn't set if the hostname is already set.
2000-06-20 08:34:33 +00:00
e7d6b96938
Merge a bunch of things from crypto-us and crypto-intl into basesrc,
...
adding support for Heimdal/KTH Kerberos where easy to do so. Eliminate
bsd.crypto.mk.
There is still a bunch more work to do, but crypto is now more-or-less
fully merged into the base NetBSD distribution.
2000-06-20 06:00:24 +00:00
fdcd620b35
Less use for kernfs/procfs now.
2000-06-19 18:32:08 +00:00
8c791f7aee
add radius & radacct.
2000-06-18 04:09:54 +00:00
80873ae6f8
make kernels for TX3912 TX3922.
2000-06-17 10:59:27 +00:00
d880cab464
MD etc bits. MAKEDEV incomplete.
2000-06-14 05:28:59 +00:00
c45b4229e4
typo
2000-06-14 03:24:16 +00:00
60cd90f104
TODO; should check /etc/ipsec.conf owner/permission,
...
while we don't have find(1).
2000-06-13 18:17:13 +00:00
00ded2c64e
add rc.d/ipsec for ipsec configuration. when enabled, it will inject
...
/etc/ipsec.conf into "setkey -f". PR 9609.
2000-06-13 16:29:53 +00:00
246f43dbbb
use ${start_precmd} to check duplicate sendmail.cf.
...
do not use "err" on failure, it is not that fatal (it's okay if we
don't start sendmail)
2000-06-13 15:53:03 +00:00
01c627b9ed
Add a wd version of fstab since most macppc now are ide based
2000-06-12 23:06:59 +00:00
2ecddab632
Build GENERIC_MD too.
2000-06-12 23:04:36 +00:00
c21cf29460
MD Makefile.inc to make release for news68k.
...
XXX distrib/notes/news68k is not yet.
2000-06-12 15:09:39 +00:00
de480e09b1
Do machine dependent part of 'make release'.
2000-06-12 12:41:40 +00:00
21fcee54a9
Loosen sendmail's permission checks for building the aliases.db file
...
even further. Particularly, allow ${DESTDIR} to be within a world writable
directory, such as /var/tmp.
2000-06-12 06:23:21 +00:00
af2ad1c7a1
Split /dev/fd/* from std entry. Install floppy does not require them.
2000-06-11 17:30:00 +00:00
e8c2265aae
Make /var/games/sail here.
2000-06-11 15:36:26 +00:00
9f387ca272
Pass ${MAKEFLAGS} to all recursive invocations of ${MAKE}.
2000-06-11 13:01:29 +00:00
a32605d17c
pcvt is gone and therefore ttyv[1-7] as well.
2000-06-11 09:13:51 +00:00
63698a2c60
Revert to decemal numbering. From talking w/ Jason, we really should
...
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..
2000-06-09 17:58:29 +00:00
00ee1c57fc
Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
...
to macppc's MAKEDEV.
2000-06-09 16:59:03 +00:00
5b8623bec6
Add and rc.conf.d directory. If a config file for command X exists
...
(/etc/rc.conf.d/X), then it is sourced in addition of /etc/rc.conf
This means that the base system will still use rc.conf, but that
3rd party scripts can use rc.conf.d
2000-06-09 14:27:57 +00:00
75748efda9
Use load_rc_config
2000-06-09 14:14:44 +00:00
2f3b6e9a65
Fix blocksize to match ns/nt/nc.
2000-06-09 12:58:57 +00:00
0ced5dd715
Enable -6 flag to nfsd.
2000-06-09 00:08:02 +00:00
8e734e6188
Make the release notes, etc.
2000-06-07 20:29:00 +00:00
b88d86b1b6
Comment out telnet, ftp since they use cleartext passwords (discussed
...
recently on tech-net, no objection raised except that it doesn't go
far enough..)
Fix misc/10219 as suggested in PR: add -L to rlogind and -l to tftpd
command lines to enable logging.
2000-06-06 12:04:02 +00:00
95c4357e1b
Add kpop.
2000-06-05 18:12:57 +00:00
0377727ee6
Fix typo in last commit.
2000-06-04 09:34:58 +00:00
306acd3e78
Handle "bktr" related devices like audio devices:
...
- Create device nodes with numbered names (e.g. "tuner0").
- Create softlinks with unnumbered names (e.g. "tuner") pointing to device
nodes of unit 0.
2000-06-04 09:34:06 +00:00
2ece7fc42f
use netstat -inv for all address familires. PR 10249.
2000-06-04 08:35:10 +00:00
609377a40f
run sendmail under the following conditions:
...
- /etc/mail/sendmail.cf exists, no /etc/sendmail.cf
- /etc/mail/sendmail.cf exists, /etc/sendmail.cf same content as
/etc/mail/sendmail.cf
die in other cases. PR 10243.
2000-06-04 08:33:58 +00:00
e3fc70bd16
Add a ttyaction file for port-i386 that properly sets the ownership
...
on the console device when you log in using wscons on the console.
Why haven't we had defaults for this all this time?
2000-06-04 00:04:59 +00:00
4d477e62b7
install ttyaction if it exists
2000-06-03 23:53:17 +00:00
5b78d0c312
Rename a remaing comment about portmap to rpcbind.
2000-06-03 17:23:59 +00:00
a5f38c029b
rpcbind uses a pidfile.
2000-06-03 00:17:17 +00:00
580b06b52e
s/portmap/rpcbind/
2000-06-02 23:23:27 +00:00
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
ce0c35cb45
Make the two installation directories mentioned in INSTALL.*
2000-05-31 21:09:48 +00:00
934311a24b
Update instfs to current ramdisk size.
2000-05-31 17:39:55 +00:00
a7c4c34f96
refer PR 10100 for /etc/sendmail.cf check
2000-05-31 16:00:36 +00:00
1a725dd534
Build and install the release notes.
2000-05-31 15:45:55 +00:00
d32a31d48c
Build boot media and release notes under "snap_md_post", to complete
...
the "make release". Largely copied from the i386 port, and adapted.
2000-05-31 14:33:11 +00:00
f5e3c48aad
Depends on quota; when quotached runs while NFS clients are writing,
...
bad things happens.
2000-05-29 07:10:41 +00:00
e63bc36c7f
Call "load_rc_config()" earlier so that configuration variables are read
...
before command arguments are defined. Fixes PR bin/10220 by Ron Roskens.
2000-05-29 06:53:03 +00:00
bb3e285167
Add Cyclades-Z nodes.
2000-05-28 23:12:15 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
cdc1e0be32
/etc/dhclient.conf is *not* required for dhclient to run.
2000-05-26 20:44:17 +00:00
e4983783f7
Enhance "rc.lkm" so that it works properly with "/etc/rc.d/lkm[123]".
2000-05-26 17:46:16 +00:00
fb3a33ff99
We may as well allow local additions to /etc/security, since it gets done
...
for the other periodic checks.
2000-05-26 17:08:21 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
60270df72a
remove /etc/sendmail and other old items.
...
PR 10171 from Andrew Brown.
2000-05-22 04:14:30 +00:00
76b8870254
Add declarations to silence boot-time warnings from named
2000-05-19 13:07:37 +00:00
66b5e3cb8a
make miniroot play with distrib/miniroot
2000-05-18 02:03:36 +00:00
61632e05bb
Software bloat. we need more space for the ramdisk.
2000-05-17 21:44:15 +00:00
18cbc264e3
build INSTALL for ramdisk. cleanup pcs750.bin rules to not leave droppings
...
behind.
2000-05-17 21:40:45 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
4c318b5d41
At boot, initiate parity/mirror reconstruction as required.
...
This operation is backgrounded, and sequentially ordered.
2000-05-16 16:54:33 +00:00
d683136c9f
Don't complain about existence of "/etc/sendmail.cf" if "sendmail" is
...
not set to "YES" in "/etc/rc.conf".
2000-05-15 06:16:04 +00:00
598c993af2
Add RCSid.
2000-05-14 23:13:54 +00:00
e3d7832343
Minor change:
...
Don't use a backquote expression to get the host name; use a pattern
substitution on lop-nor.ihack.net instead.
2000-05-14 18:20:55 +00:00
24ad7fd36c
Add "wscons" to requirement list so that a tty used for syslog output
...
will be created before starting the syslog daemon.
2000-05-14 13:12:11 +00:00
5c1b0ec207
Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf.
...
This allows us or a user to change the configuration file method in
one place - rc.subr - without having to edit all of the rc.d/* files.
2000-05-13 08:45:06 +00:00
2c25ae21eb
Implement load_rc_config(), which takes the config name as an argument.
...
Currently this just loads /etc/rc.conf, but this will make it easier
for us and users to modify the config mechanism without modifying all
of /etc/rc.d/*.
2000-05-13 08:23:45 +00:00
78abee064b
remove netstart
2000-05-13 08:07:01 +00:00
92612bb41e
this should have been removed as part of the rc.d commit
2000-05-13 08:02:35 +00:00
ff0601b77a
remove commented-out entry for mountd, since whilst support for inetd
...
was added to mountd in mountd.c::1.6, it was removed as part of the
4.4-lite merge in mountd.c::1.12. if the entry was uncommented your
machine might clag up after a showmount as inetd spawned lots of
mountd processes...
2000-05-13 07:28:09 +00:00
d934c3b536
only support reload as an extra command; there's too much special case
...
code that needs to be implemented to make this script totally replicate
what /usr/sbin/ndc does.
2000-05-13 03:46:42 +00:00
eabbaa2f0c
implement three new variables for run_rc_command:
...
- ${name}_chdir directory to cd to before running ${command}
- ${name}_nice nice level to run ${command} at
- ${name}_user user to run ${command} as
based on [misc/9954] by Dave Sainty <dave@dtsp.co.nz>, except that it works :)
2000-05-13 03:07:17 +00:00
6df6f56909
remove obsolete /usr/X11 entries
2000-05-13 00:57:17 +00:00
a6ff236176
Pasto in last.
2000-05-12 18:12:55 +00:00
fe42f7fbab
Add all of the arm26 dirs.
2000-05-12 18:11:50 +00:00
51ab46d939
No, *REALLY* add man4/arm26.
2000-05-10 16:53:53 +00:00
e37973802e
Add {cat,man}4/arm26
2000-05-10 16:46:41 +00:00
6c97e2bd78
Initial commit of arm26 port
2000-05-09 21:55:44 +00:00
4bc21c2fb4
do not let 127.0.0.0/8 leave the node. based on RFC1122.
2000-05-09 10:49:26 +00:00
10e25f6012
make default sendmail.cf IPv4-only again.
...
roll sendmail-IPv6.cf, which does IPv4/v6.
2000-05-08 00:37:53 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
fff5c01493
This was doubly borken...
2000-05-07 19:03:25 +00:00
fe4377f98c
Only warn on non-default old nfsiod args.
2000-05-07 02:04:20 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
83072a01c7
Since src/gnu/usr.sbin is populated add it to the cdpath.
2000-05-06 13:17:33 +00:00
4157176c27
Added an obj target to ensure that KERNOBJDIR exists - in case
...
we are using MAKEOBJDIRPREFIX.
Fixed the comment about why we grab ../Makefile.inc
2000-05-06 07:52:19 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
13c8f7a2df
check /etc/mail/aliases on check_aliases.
...
/etc/aliases will be checked as well, if exists (for backward compatibility).
2000-05-05 18:28:53 +00:00
6901565540
sync with sendmail 8.10.1 migration. /etc -> etc/mail
...
From: Andrew Brown <atatat@atatdot.net>
2000-05-04 01:07:40 +00:00
78565052f1
do not cope with pre-8.10 configuration file. do not start sendmail.
...
From: hubert
2000-05-03 17:03:10 +00:00
dc09e9637e
xntpd -> ntpd
2000-05-03 14:40:39 +00:00
14e9ff0043
correct typo (sendmail upgrade)
2000-05-03 11:37:16 +00:00
366bbade5a
sync with sendmail upgrade.
...
- sendmail configuration files are in /etc/mail, not /etc.
- src/etc/aliases will be installed into /etc/mail/aliases (confusing)
- rc.d/sendmail warns if /etc/sendmail.cf exists.
2000-05-03 10:55:19 +00:00
94dc65714b
add /etc/mail, which will be used with sendmail 8.10.x.
2000-05-03 09:24:23 +00:00
17424fe1fe
sync with rc.d/network, about IPv6 prefix filters
...
(since we still ship it, we need to make it up-to-date)
2000-05-03 07:04:22 +00:00
45fb67b360
remove/change missleading comments
2000-05-03 00:10:33 +00:00
b09bd0e884
s/xntpd/ntpd/
2000-05-02 16:31:11 +00:00
e5150c9868
Out with the old, in with the new.
2000-05-02 12:19:20 +00:00
dd4d1cfbc2
Change xntpd to ntpd.
2000-05-02 12:17:28 +00:00
dfbbad05df
Use "ntpd.pid" for pid file, change other xntp references to ntp.
2000-05-02 12:16:07 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
f5e35141a6
Remove the never populated /usr/share/doc/xntp, and add /usr/share/doc/html
...
and the ntp4 subdirectories under that.
2000-05-02 11:49:16 +00:00
40ca86f953
Make audio devices.
2000-05-02 08:17:51 +00:00
2e87728bd8
Restructure a bit as to create wscons device nodes using the 'wscons'
...
argument, rather than enumerating all the terminal devices. (Convenient
side-effect: ttyEcfg ist actually created.)
2000-05-02 08:03:38 +00:00
734bcf16ec
Use bsd.kernobj.mk
...
Also if KERNELS_DONE is defined skip building kernels. Handy if re-spinning
due to errors in distrib later on.
2000-05-02 06:41:44 +00:00
0a43d29758
Install the localhost namedb file.
2000-05-01 05:29:34 +00:00
31d7194c3f
Add "make distribution" for Postfix.
2000-04-30 21:45:55 +00:00
816886ef7a
move /usr/share/postfix to /usr/share/examples/postfix. It makes sense
...
to have a /usr/share/sendmail because that directory contains the m4
source file for the .cf file in /etc, but for postfix, it really is
just an example.
2000-04-30 18:10:28 +00:00
0a610ebbd3
use extra_commands= instead of using 2nd argument to run_rc_command
2000-04-30 13:23:04 +00:00
c8ddd6124a
- prefix some more local variables with `_' (when you have a convention,
...
stick to it :-)
- simplify run_rc_script (no need to support fast* or force* here...)
- clarify some comments
2000-04-30 13:16:47 +00:00
3b853f3018
remove /var/run/dmesg.boot before attempting to write to it
2000-04-30 12:39:56 +00:00
32c9a44095
- use checkyesno in $start_precmd and change start_cmd to `postfix start'
...
- use $extra_commands instead of passing "reload" to run_rc_command
2000-04-30 12:21:00 +00:00
0c2e1a2b7e
change run_rc_command() to take the list of extra commands supported
...
from a variable ($extra_commands) as opposed to from $2-* on the
argument list. it's cleaner; and allows for the possibility of
multiple command arguments being passed to run_rc_command() in the
future.
2000-04-30 12:19:07 +00:00
fc2c9714f0
add default alias for postfix pointing to root.
2000-04-30 05:49:10 +00:00
cc7e7b3d7a
Fix raw partition number for cd(4) nodes.
2000-04-29 09:47:01 +00:00
63f94fabf2
Fix the last change so it doesn't fail due too a missing '; then'.
2000-04-29 06:01:08 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
e335e1cd4d
useradd defaults to using the 'users' group, so add one.
2000-04-29 00:09:31 +00:00
b093a1430b
Make ca* devices.
2000-04-28 13:55:04 +00:00
0c5f67f0ac
in check_pidfile and check_process, also match "(" + `basename prog` + ")" .
...
noted by veego@
2000-04-28 01:40:09 +00:00
7a38ab7c44
Don't warn about $hostname not being set if $dhclient == YES; it's quite
...
likely that we'll be getting the hostname via DHCP when it runs.
2000-04-28 00:13:39 +00:00
ebe6c4d40d
Use the stop_cmd to unmount the filesystems with 'umount -a'.
...
This helps to fix the unclean reboots (at least on my system).
2000-04-27 21:00:50 +00:00
c9f5754ee8
You need to add a xxx_precmd with a checkyesno yyy if you use a xxx_cmd
...
in an rc.d script.
2000-04-27 20:58:26 +00:00
9a8415ba0b
Add a bunch of SSL services.
2000-04-26 16:28:17 +00:00
0716b4f382
don't bother checking rc_configured each time run_rc_command executes; once in /etc/rc is enough
2000-04-26 15:06:46 +00:00
fad0a37405
Provide rc.d support for the Postfix mail system. Committed to the
...
base because there is no support for packages in rc.d, and Postfix
is supposed to become part of the base system anyhow.
2000-04-26 05:28:03 +00:00
0316517d36
Make ccd and raidframe provide `disks', and make swap1 and fsck
...
depend on `disks', rather than `ccd' and `raidframe'.
2000-04-26 05:13:51 +00:00
dffc281396
add zone file for "localhost.". this is included in examples in BIND8,
...
and is a good thing to have (no outside DNS server will supply this).
2000-04-26 01:33:27 +00:00
065c791de8
Add skeyaudit to /etc/security (with a variable to disable) per PR 5871
2000-04-24 23:46:37 +00:00
caa2beb10e
revert previous; the fast-start functionality already existed, and
...
works at multi-user boot. (starting /etc/rc after single user boot
doesn't exhibit this fast start behaviour).
2000-04-22 03:01:22 +00:00
3fff16ff47
rtsol is not a daemon. rtsol.d should have been killed by rc.d/rtsold.
...
(correct me if i'm wrong)
2000-04-20 02:12:04 +00:00
f3d36a14e8
Add login.conf, sysctl.conf and usermgmt.conf.
2000-04-20 02:01:52 +00:00
72951fce20
Don't need ()'s around "cd ... && ${MAKE} ...".
2000-04-19 13:45:24 +00:00
5e6480feca
Add an "rc_fastboot" variable check in rc.subr, that if set adds
...
"fast" to the start of the run_rc_command arg.
/etc/rc calls each rc.d script with rc_fastboot=yes so that rc.subr
aware scripts to use "faststart" to skip the process running check.
2000-04-19 04:26:22 +00:00
a596663a81
nfsiod script is gone.
2000-04-16 04:18:51 +00:00
a32696c2de
Death to nfsiod!
...
It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.
2000-04-15 21:14:48 +00:00
f408de971d
as this script is primarily for compatibility (with people's
...
rc.local), call it in a way that is compatible with the old behaviour:
* remove the stop case
* don't set $1="start" in the start case
xxx: it's debatable if this script should even exist, but i digress ;-)
2000-04-13 00:39:47 +00:00
2665e61925
make `stop' a no-op, so that the network doesn't disappear at an
...
inconvenient time during boot.
this may be fixed a different way in the long term... (not that the old
rc.shutdown supported stopping the network, or could i really see a
practical use for allowing it at this stage, but in the future someone
might want the functionality i've just disabled).
2000-04-11 05:03:24 +00:00
506c359083
Improve backwards compatability and leave securelevel the old way.
2000-04-09 21:00:04 +00:00
163510ecf4
The file /etc/sysctl.conf is now run with sysctl -f at boot time.
...
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.
The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.
2000-04-08 23:02:53 +00:00
93f24178a7
dhclient does not, in fact, require /var/db/dhclient.leases to exist.
2000-04-06 17:19:13 +00:00
dc04b64906
- - Take BUILD_KERNELS to be the kernels to make into sysinstall kernels.
...
- - Clean up.
2000-03-30 03:25:48 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
5c57db66c3
Add comments.
2000-03-29 15:58:42 +00:00
58e9dbb6aa
Mount ext2 fs with kernel on /stand.
2000-03-29 15:58:34 +00:00
129d97f658
routed is live in /sbin, not /usr/sbin. Pointed out by kay@kaynet.or.jp.
2000-03-29 09:09:06 +00:00
aea5721be9
from i386 port revision 1.5 by Tsugutomo Enami:
...
Uncomment out the CD-ROM entry and remove outdated comment for the
reason why it was commented out.
2000-03-29 06:45:35 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
e8b27ae5ed
Check rc_configured also here, and bail out if it isn't set to yes.
2000-03-29 02:13:51 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
47cd48f3db
Use distrib/sets/Makefile in the release: and new cryptoset: targets.
2000-03-28 00:39:17 +00:00
96b85dc028
set major number of /dev/console to 0 (not 8 (com))
2000-03-27 19:35:25 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
3a640d007a
Add ftpd.conf.
2000-03-24 22:37:48 +00:00
5ce9472a83
NetBSD/cobalt /etc.
2000-03-19 22:10:56 +00:00
0a94c72b0f
correct reject route installations for IPv6. improve comments.
2000-03-17 17:41:01 +00:00
10257beef5
comment fix. it is not mandatory to supply the configuration file,
...
rtadvd(8) can guess the configuration from the routing setups.
2000-03-17 17:35:20 +00:00
174455c38a
fix check for domainname since it can come from /etc/defaultdomain as well as $domainname
2000-03-16 22:22:15 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
8fbb81c21e
dhclient lives in /sbin, not /usr/sbin
2000-03-15 03:15:47 +00:00
d8a503fec5
Try to make the install floppy work on 4MB machines:
...
- reduce memory disk size
- use x_dd, x_ifconfig and x_route
- use libhack.o (sync with i386)
- don't use mfs as /tmp
Tested by Luigi Filippini <filippini@tiscali.it> and me.
2000-03-13 13:16:54 +00:00
52462864b7
ssh script removed, so remove sshd=NO line
2000-03-13 05:07:15 +00:00
0059d641e5
* replace daemon, login, servers with DAEMON, LOGIN, SERVERS
...
* remove sshd (it was from my private system)
2000-03-13 04:03:52 +00:00
028706d573
Add wsmux0 and wsmux1.
2000-03-12 13:58:14 +00:00
deaf45edc1
disallow packets to malicious 6to4 prefix, based on
...
http://playground.iijlab.net/i-d/draft-itojun-ipv6-transition-abuse-00.txt
2000-03-12 04:21:26 +00:00
5d18d90843
Rearrange so the ouput of this is a bit more cosmetic.
2000-03-12 03:49:36 +00:00
292a9f03be
Since we have an "sshd" script in rc.d, we should have an "sshd" knob
...
in rc.conf.
2000-03-12 03:49:11 +00:00
bfa0f14ea6
Fix the network_stop function so it doesn't fails due to missing ]['s.
2000-03-11 20:13:42 +00:00
0cc5873563
Add raidframe to the REQUIRE list. rcorder seems to get it right, but it
...
is better to add it.
2000-03-11 20:12:22 +00:00
b869270297
Don't start rc.wscons with an start/stop argument. Disable stop and add an
...
checkyesno check.
2000-03-11 20:11:16 +00:00
84807b9933
Add missing checkyesno's.
2000-03-11 20:10:21 +00:00
aacfec2af3
mountd requires mountall.
2000-03-11 17:29:50 +00:00
5fa9d50bcd
add missing callunit.
...
fix ucbsnd.
2000-03-11 07:45:31 +00:00
738b8e9986
oops, pppd doesn't require /etc/ppp/options now.
2000-03-10 20:21:57 +00:00
a59fb6d3bc
forgot to add /etc/ppp/options to special(5)
2000-03-10 20:02:46 +00:00
47cab3ac18
create /etc/ppp when building install sets
...
add this and a lot of files not previously looked at in special(5)
2000-03-10 20:01:50 +00:00
c595577502
if checkyesno do_rcshutdown, run scripts in /etc/rc.d/* in the
...
reverse order returned by rcorder
2000-03-10 13:17:25 +00:00
8f8c6d6b2a
run scripts in /etc/rc.d/* in the order returned by rcorder
2000-03-10 13:15:58 +00:00
d2fc7332ae
add /etc/rc.d
2000-03-10 12:04:43 +00:00
c132a440d2
install rc.d scripts
2000-03-10 11:59:35 +00:00
c53094a738
rc.d scripts derived from /etc/rc
2000-03-10 11:53:23 +00:00
6096ea59cd
* add:
...
check_pidfile parse a pidfile for a pid, checking that the
process is running, and print the matching pid
check_process print a list of running pids that match the procname
run_rc_command kitchen sink function to simplify creation of
rc.d scripts
run_rc_script invoke an rc.d script appropriately
rc_usage print a usage string for an rc.d script
err similar to err(3)
warn similar to warn(3)
* add copyright
* remove islocalfs(); nothing uses it
2000-03-10 11:39:27 +00:00
dfa4c86f40
Correct cd* minor number.
2000-03-07 18:24:16 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
020a8ac5b2
make clearing of /tmp after reboot configurable (default on), as per recent
...
discussion on current-users
2000-03-07 14:33:13 +00:00
72f77e9fb3
Build the miniroot, too, when building the release.
2000-03-06 21:54:05 +00:00
f61a38f7f7
Add "ta=4.2BSD" to floppy A partition + some other small fixes.
...
From Todd Whitesel.
2000-03-04 16:11:35 +00:00
24c978b1d5
Add "floppy" target.
2000-03-04 15:46:08 +00:00
8c8afb18a9
add TX39 internal UART and UCB1200 audio device.
2000-03-04 15:02:44 +00:00
9fbb1fd9b4
Add /usr/share/man/{cat,man}8/arc
2000-03-03 20:34:17 +00:00
2b9070c1d9
to make binary snapshot
2000-03-03 12:56:05 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
89c2906ea5
explicitly allow writable directories when rebuilding the alias
...
database, otherwise this will fail if any directory in ${DESTDIR} is
g+w.
2000-03-01 16:48:35 +00:00
627898817e
sync with etc/namedb change (IPv6 loopback reverse database file)
2000-03-01 11:21:13 +00:00
ca7ee807d5
change filename for IPv6 loopback address (::1).
...
many found it ugly, and I found that I've made a mistake in old name.
there needs to be 4 more "0"s!
this commit renames
etc/namedb/0000:0000:0000:0000:0000:0000:000 into etc/namedb/loopback.v6.
(based on recent discussion I did not use cvsmove)
2000-03-01 11:06:27 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
37eb9eebc2
Initial import prep port.
2000-02-29 15:21:20 +00:00
f539e10ff8
enable IPv6 ftp and telnet by default.
...
it makes more sense to me as we have INET6 in kernel, and we have ftp4/telnet4
enabled by default. maybe I'm biased:-)
2000-02-28 17:25:42 +00:00
24d8e4f798
added share/locale/pt_BR/LC_MESSAGES for grep 2.4
2000-02-27 01:27:48 +00:00
f4665e12b2
Install a blank sendmail.st here.
2000-02-26 18:42:31 +00:00
6009529bb4
Remove extra `;' in md* entry.
2000-02-26 05:39:51 +00:00
bd10f55368
Nuke an extra ;; introduced by md* fix.
2000-02-26 04:43:27 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
a23763688e
Make MI SCSI device ready. For now MAKEDEV all won't create them.
2000-02-22 03:57:38 +00:00
a59987f569
Let the main Makefile deal with building kernels.
2000-02-20 03:52:22 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
ad78992969
Always checksum binary/kernel, now that there is at least one file in it.
2000-02-20 03:32:37 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
f10265540b
Always install GENERIC in the kernels directory.
2000-02-20 03:10:50 +00:00
4bf1c78bfb
Make the tset stuff actually set the environment variables again.
...
Someone was on crack.
2000-02-19 19:00:13 +00:00
b24c03aa71
Simplify the tset crap, and do not set $HOME gratuitously.
2000-02-19 18:39:01 +00:00
4316d096db
1.) bring over the second half of David Brownlee's change to dot.login --
...
don't query the user for terminal type if the type is not `unknown'
2.) change this a little in both the csh and the [k]sh cases -- do call
tset(1) even if the terminal type is known (so that TERMCAP is set
properly, but don't have it query the user.
2000-02-16 03:07:09 +00:00
8d796b1774
Port to [k]sh(1) startup files David Brownlee's improvement from
...
cvs rdiff -r1.4 -r1.5 basesrc/etc/root/dot.login
As there, text is from Miles Nordin.
2000-02-16 02:02:02 +00:00
6d39fee74c
Only display the 'use su' message in the non 'su -' case.
...
Update the 'use su' message (text from Miles Nordin).
If the terminal type is !unknown, do not prompt for it.
2000-02-15 19:29:54 +00:00
aae51fbc36
Check for CRYPTOPATH variable instead of "../domestic" when deciding to build the secr set.
2000-02-14 18:37:39 +00:00
29cb4c7412
Merge wscons work onto the main development branch.
2000-02-14 07:12:34 +00:00
a3aa7fe66f
add ip6defaultif configuration variable in rc.conf, for configuring
...
default outgoing interface for IPv6 host when default router list is empty.
the configuration is just for very rare case. it is safe to leave it empty.
2000-02-13 07:47:26 +00:00
c45bb5af35
change console terminal type from 'unknown' to 'vt100'.
2000-02-12 13:46:54 +00:00
e70542be3a
fix comment in "imap" line to honor IMAP4.
...
IMAP2 (RFC1176): Interactive Mail Access Protocol
IMAP3 (RFC1203): Interactive Mail Access Protocol
IMAP4 (RFC1730): Internet Message Access Protocol
2000-02-12 04:02:33 +00:00
15f0d67b67
improve comments about /etc/ifconfig.xxN, /etc/ifaliases, $ifaliases_xxN.
2000-02-11 08:09:56 +00:00
a89dc9b12d
add two symbolic name for tcp/udp port 143: "imap" and "imap4".
...
at least without "imap", fetchmail chokes.
2000-02-10 18:20:56 +00:00
810e380c89
Oops, I've forgotten to commit this on Jan 21.
...
>- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
>- now raw partitions are used for memory disk ioctls
2000-02-10 16:45:37 +00:00
94bfb48ec9
add missing semi-colon
2000-02-09 22:23:32 +00:00
7a0d226970
ip6forwarding -> ip6mode change (somehow i forgot to commit...)
...
PR: 9375
2000-02-09 16:24:03 +00:00
b32545eabf
add tcp6 lines for rshd/rlogind.
2000-02-09 11:05:04 +00:00
c089f6c69a
"sendmail" is in "src/gnu/usr.sbin/sendmail" now.
2000-02-09 08:15:12 +00:00
bb08aa94ac
add ./usr/share/man/{man3,cat3}/atari
2000-02-07 17:48:52 +00:00
4a47d48db2
Install correct ld.so.conf if etc.${MACHINE}/ld.so.conf exists.
2000-02-05 18:25:01 +00:00
aba424872a
add IPv6 loopback address (::1).
2000-02-05 17:53:30 +00:00
64170fdeab
remove (slightly) bogus comment line about IPv6 config.
2000-02-05 17:52:06 +00:00
e9056d34cb
change IPv6 configuration syntax to avoid ambiguity.
...
ip6mode=host: IPv6 host
ip6mode=autohost: IPv6 host, with autoconfig
ip6mode=router: IPv6 router
backward compatibility to "ip6forwading" is provided.
2000-02-05 17:02:42 +00:00
bba35f4508
Install named/0000:0000:0000:0000:0000:0000:000 and ntp.conf to fix the
...
damage in distrib/lists.
2000-02-04 09:24:08 +00:00
f250672496
We don't have a bind4.
2000-02-03 17:51:51 +00:00
db217da391
add example for HP Laserjet with JetDirect ethernet card
2000-02-02 16:04:51 +00:00
4f7848e09f
Add IDE wd* devices for MI wdc support.
2000-02-01 05:26:12 +00:00
f58c419f41
Allow NFS servers to start up.
2000-01-31 12:47:29 +00:00
e80b8c24a3
remove extraneous flags for xntpd startup, since there is now a
...
default ntp.conf file, per PR 4312
2000-01-28 06:55:52 +00:00
613805537a
A default NTP configuration file, per PR 4312.
2000-01-28 06:49:16 +00:00
6e5a5cc306
add reverse lookup table for IPv6 loopback (::1).
...
ugly...
2000-01-27 05:17:12 +00:00
1eea48680e
use 'route -n flush' not 'route flush' otherwise we might spend all our time
...
trying to print hostnames for things we are just flushing anyway.
2000-01-26 07:01:53 +00:00
99a7ca92be
Sync with the reality.
2000-01-24 02:00:50 +00:00
55f474fc12
Fix raidN device creation.
2000-01-21 16:46:04 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
c6459da685
add SES device
2000-01-20 17:13:27 +00:00
7f4bafc7bd
add "-n" to netstat -i to avoid reverse query and better audit.
...
print IPv6 interface stat by netstat -inv separately.
comments from: hubertf and others
2000-01-20 04:13:54 +00:00
7c5a18e4d2
Start automount daemon even if NFS client is not activated. This makes
...
sense for system where "amd" is used to mount local devices like e.g.
CD-ROM drives. Fixes PR misc/9126 by Bjoern Labitzke.
2000-01-19 12:00:49 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
5a3473733a
Make some warning message consistient with others.
2000-01-19 03:52:12 +00:00
5e1ff60d11
Change the name rc.conf.local to rc.local.conf. This makes *.conf match all
...
config files. Thanks to Greg Oster for the suggestion.
2000-01-18 22:43:23 +00:00
0028c40c50
While we're waiting for the new all singing, all dancing rc system, add
...
a way to configure local stuff; if the file rc.conf.local exists it
is sourced at the end of rc.conf.
2000-01-18 21:52:38 +00:00
aabd13ef64
Use /var/spool/lpd/XXX as pool directory, not /var/spool/output/XXX
...
Intended to address PR #8551
2000-01-17 18:56:08 +00:00
7ab6c9ab36
add IPv6 items.
...
s/ippcp/ipcomp/ for #108 , as
http://www.isi.edu/in-notes/iana/assignments/protocol-numbers
lists it as ipcomp, not ippcp.
2000-01-17 16:39:37 +00:00
lukem