f9d12c2349
Don't fiddle with any isdn interface if the isdnd variable is set to NO
...
in rc.conf.
Actually do install the isdnd script.
2001-01-07 17:53:36 +00:00
15a3b3b6e1
Add startup script for isdnd.
2001-01-07 17:04:49 +00:00
1ab6aa7287
s/ramdisk/xminiroot/
2001-01-07 09:31:17 +00:00
6c5434ca81
Add /usr/share/examples/isdn
2001-01-06 14:45:57 +00:00
7b07af406e
Add ISDN devices.
2001-01-06 13:47:44 +00:00
a5211f152e
create /usr/include/readline
2001-01-05 21:32:34 +00:00
e56f95eaf0
Add all the new /usr/share/sushi directories
2001-01-05 07:00:31 +00:00
5bcac3e56c
Add the subdirectory for /usr/include/cdk
2001-01-04 21:04:43 +00:00
6c348b2e2e
add $ip6sitelocal, to control installation of reject route for fec0::/10.
2001-01-03 17:54:04 +00:00
0ce4a9a0de
Use highest bit of minor as an extra bit for the partition number to
...
bump the maximum partition number on NetBSD-i386 to 16. (Approved by fvdl)
2001-01-02 23:06:54 +00:00
6d62925a7c
/etc/openssl/cert.pem is a file, not a directory. PR 11772
2000-12-31 07:32:33 +00:00
b60001d78d
move tcp6/udp6 entries upwards so that they do not get out of sync with
...
IPv4 services. add kerberos-adm and internal services (like echo) on tcp/udp6.
2000-12-31 06:06:50 +00:00
829de9dbd3
Add Note: about uncommenting font line to use 80x50 screens.
2000-12-31 01:22:14 +00:00
3207cfe8dd
install sample configuration files into /usr/share/examples/racoon.
...
make variable "SBIN_RACOON" will build static racoon binary, and installs
it into /sbin (nonstandard)
2000-12-29 03:16:39 +00:00
1491d54799
Nuke b0 entries since they are not used anymore.
2000-12-29 03:05:04 +00:00
9a441d9bb8
dig /etc/racoon
2000-12-29 02:43:42 +00:00
144e2eb120
Add wd*.
2000-12-27 22:21:47 +00:00
d31d542a97
populate citrus xpg4dl locale definitions into /usr/share.
...
if there are any mistakes, please report (i only speak English/Japanese).
currently, only singlebyte locales are usable.
TODO: enable multibyte handler in libc - there still are few design
discussions, but we are almost ready.
2000-12-22 01:31:47 +00:00
47a48d2057
Add two more SCSI disks for the floppy. See PR 9912.
2000-12-19 22:39:34 +00:00
c5ddb89d6e
Patch from Hubert. aliases never get rebuilt if aliases.db is never originally generated.
2000-12-18 07:56:41 +00:00
cfe1eed228
Make the node for the bpp device [parallel port].
2000-12-16 22:04:14 +00:00
6eef11f223
- describe what rc.shutdown does, and what invokes it
...
- remove `.sh' suffix on script name in description
2000-12-15 00:00:09 +00:00
83334549fb
Initial import of port "dreamcast" (cloned from port "evbsh3").
2000-12-11 18:19:12 +00:00
02ab8e1e3f
nuke /usr/share/lkm - kernel modules are inherently depedant upon kernel,
...
so the example lkms should be included in kernel sets only; furthermore,
the stuff was highly outdated
relevant items will be moved to lkm(4) and under syssrc/sys/lkm/
2000-12-11 13:44:00 +00:00
6b0841e32b
Fix PR port-mac68k/11343
2000-12-07 10:57:17 +00:00
02031bda76
Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
...
support was already in $MACHINE/$MACHINE/conf.c.
2000-12-05 18:18:04 +00:00
0889c2ba96
Make iop device files.
2000-12-03 13:23:12 +00:00
4275d75e69
Correct comment for KERNOBJDIR.
2000-12-02 18:04:45 +00:00
13e5202536
Get the TARGET_ENDIANNESS by running ${CC} -E over
...
<machine/endian_machdep.h>. Fixes problems where
<machine/endian_machdep.h> just includes another file
without defining _BYTE_ORDER itself.
2000-11-30 11:31:05 +00:00
da9feda63a
Remove watchdog before creating it. Keeps the same behavior as the rest of the creates
2000-11-30 07:33:52 +00:00
2eabb2676b
We do not use INSTALL_SMALL any more.
2000-11-28 03:18:18 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
46d6b5a7cd
More cautious about undefined hostname check in terms of what hostname(1)
...
returns.
2000-11-26 06:46:42 +00:00
b1ae8f82e8
Do `make release' for the miniroot too.
2000-11-24 22:07:32 +00:00
7baa1bd799
Mention mvme172/mvme177 and correct an error on the ttyZ1 line.
2000-11-24 19:51:39 +00:00
53de2db906
Automate the MD `make release|snapshot' procedure.
...
[I should have done this ages ago.]
2000-11-24 19:49:40 +00:00
647020e055
Increase the size of `rdroot' to 1024 blocks.
2000-11-24 19:39:48 +00:00
7fecedd930
I believe in that the facy nested quotes was intended to skip blank
...
lines, but am not sure it is allowed as a standard practice of the
/etc/ifconfig.xxN file.
2000-11-22 04:20:04 +00:00
f457c2158d
un-break.
2000-11-21 16:12:48 +00:00
3a384146be
Remove $amd_master. We now use /etc/amd.conf.
2000-11-21 12:21:05 +00:00
a497b11b46
The new am-utils use now /etc/amd.conf and no longer the $amd_master file.
...
Despite that /etc/amd.conf is now the default configuration file, it needs
to be defined if you supply other options when you start amd, so add it here.
2000-11-21 12:20:12 +00:00
f8ea339f55
minor typo in previous
2000-11-21 09:59:02 +00:00
fa16d69a56
Shell programming police for sophistication; take #2 . Handle the
...
case when the filename expansion results in no match more gracefully.
Far less costy than invoking a new process.
2000-11-21 09:38:06 +00:00
f412f76212
Shell programming police for sophistication. It's not necessary
...
to enclose `prog` backquote command substitution with double quotes
as it produces a quoted string. Other changes are pending this time.
2000-11-21 08:39:50 +00:00
5df0fc93e4
Remove /usr/share/examples/usermgmt and /usr/share/skel, since they
...
have been obsoleted by /etc/skel some time ago.
2000-11-18 06:05:10 +00:00
84fed31e23
start all raid[0-9].conf and raid[0-9][0-9].conf, not just raid[0-3].conf.
...
do in order, so that raidN.conf is started before raidNN.conf.
2000-11-17 05:43:46 +00:00
616bd9bad1
- replace `IFS='.'; set -- $int; echo $2` with ${int##*.}
...
- can't use $configured_interfaces in network_stop(), so use `ifconfig -lu`
instead
2000-11-17 04:19:06 +00:00
be9b3eeabc
* always run `status'; i.e, ignore the setting of $rcvar just like `rcvar' does.
...
* don't barf if `force' is used and $rcvar isn't set by the script
* only do the guts of `restart' once, by setting _rc_restart_done after the
first run through. this stops scripts which call run_rc_command more than
once (such as nfslocking) from doing the ``stop everything/start everything''
sequence n times.
2000-11-17 03:47:43 +00:00
8c16eca0e9
Add /dev/openfirm
2000-11-14 21:21:31 +00:00
7308e15009
Add support for /dev/openfirm
2000-11-14 06:55:38 +00:00
e7cf39d85e
Add wscons.
2000-11-13 19:30:56 +00:00
4f839c4a48
Do the makesums out of the right directories. Create the installation
...
directories.
2000-11-12 00:59:05 +00:00
148061c7a6
INST kernel should be under BUILD_KERNELS
2000-11-11 22:47:57 +00:00
890463ed5e
Add the install kernels
2000-11-11 20:56:46 +00:00
1c35e133b0
Install html documentation for libbz2/bzip2.
...
Reviewed by Simon Burge.
2000-11-10 02:00:09 +00:00
8b43f30672
Call pwd_mkdb with proper flag, so that it creates database in same
...
endianness as compile target. This is primarily for cross compiles.
Hopefully this method (looking into
${DESTDIR}/usr/include/machine/endian_machdep.h) is okay.
Patch sent by Andrew Brown in bin/11454.
2000-11-09 20:01:54 +00:00
cb5786ecbe
make this REQUIRE also cleartmp, so that it's started after /tmp
...
is cleared, otherwise the xfs's socket might get removed
This fixes misc/10310 by Alasdair Baird
2000-11-09 00:05:31 +00:00
2775f3b901
remind people to edit /etc/*.conf instead of /etc/defaults/*.conf
2000-11-08 23:17:50 +00:00
e7241e79df
remove etc/disklabels; refer to /var/backups/disklabel.* instead
2000-11-08 02:48:12 +00:00
85567a9983
Make cd0c instead cd0d?
2000-11-07 23:17:41 +00:00
fa16fd6f70
when doing `status', return non-zero if the program isn't running.
...
request by thorpej.
2000-11-06 00:08:30 +00:00
9046e7c099
when running `forcerestart', call the underlying `stop' and `start'
...
with the `force' prefix as well
2000-11-05 23:48:14 +00:00
0c8f484437
Make the `watchdog' device node.
2000-11-05 02:13:35 +00:00
aa52914022
Commit this on HEAD as intended....
...
Add and md_post rule that handles the miniroot and notes goop.
2000-11-04 21:15:36 +00:00
bf2f674e8c
Make ccd(4) and vnd(4) device files on "MAKEDEV all".
2000-11-03 11:37:56 +00:00
ab161cd2e1
Add missing directories "/usr/share/locale/no@nynorsk" and
...
"/usr/share/locale/no@nynorsk/LC_MESSAGES".
2000-11-02 22:43:43 +00:00
8203edc73c
Fix typo in last commit.
2000-11-02 22:33:10 +00:00
a5c364efbb
Add /usr/share/locale/{da,pt}/LC_MESSAGES used by gettext.
2000-11-02 20:49:10 +00:00
63a0bbd711
* Add `installation/floppy' and `installation/tape' directories to the
...
release(7) hierarchy and populate them with links to images in `bootfs'
* Remove miniroot scripts from `installation/netboot'; these are contained
in the instfs.tgz which can be used to setup an NFS root directory (for
installation purposes).
* Make the bootable cd-rom image using the `bootfs' filesystem, since a bug
in the cd driver prevents us from running directly from a CD filesystem.
2000-10-31 21:18:36 +00:00
a84221b9db
Just nuke the "build aliases.db" stuff from here. It's not
...
necessary, as /etc/rc.d/sendmail will already rebuild DB files
automatically if necessary, and doing aliases.db here just
totally breaks cross-compiling.
2000-10-30 21:48:20 +00:00
90ac46632d
Make md(4) device files on "all" target.
2000-10-29 13:03:37 +00:00
0332a5d899
Remove some spaces at the end of the line and replace the space after
...
kerberos-master with an tab.
2000-10-29 07:59:07 +00:00
52645e1ee3
Moved comment about rm out of shell command area. (typo)
2000-10-29 05:16:53 +00:00
977a131f8e
Switch back to vt100 by default, plus comment that shark should use pc3
2000-10-26 09:55:50 +00:00
6349db47e1
Ignore errors from the rm in snap_pre. RELEASEDIR could be a mountpoint and
...
rm complains because it can't actually nuke the mount point. Anything serious
like permissions or I/O errors will get caught in the install's after this
anyways.
2000-10-23 01:50:37 +00:00
ccbcb60028
Do `make release' in distrib/sparc/instfs.
2000-10-22 14:22:08 +00:00
b3aa184674
Add target to make a bootable CD-R image.
2000-10-20 14:13:12 +00:00
8d8ff0fb3f
Remove references to {bootfs,ramdisk}.sysinst.
2000-10-20 14:12:01 +00:00
b1fd9718d4
When building kernels for a release (snap_kern) use "distclean" instead of
...
"clean" to get rid of any .depend files that might be lying about in the
kernel build directory.
2000-10-19 17:53:41 +00:00
23f6f01a0d
ca -> lsu
2000-10-19 14:35:41 +00:00
654fd3b749
cd to skel during "make distribution".
...
Part of fix for PR bin/10985.
2000-10-16 13:18:36 +00:00
964e9f16fe
For "make distribution", install skel files in /etc/skel.
...
Part of fix for PR bin/10985.
2000-10-16 13:14:57 +00:00
5e1d11c2df
Copy skel files from sharesrc/share/skel.
...
Part of fix for PR bin/10985.
2000-10-16 13:12:26 +00:00
e26a7ce86b
Setting rebuild_locatedb=NO should not tell you it didn't rebuild the db
...
because there is no /var/db/locate.database; it should be quiet.
Unified the use of `echo ""'.
2000-10-15 17:32:38 +00:00
e2d9ed5833
fix typo in comment
2000-10-14 17:01:29 +00:00
144164c6e4
Fix typo in iso-image target that led to the cdrom-directory not being
...
excluded in the iso image (nothing harmful).
2000-10-14 16:45:42 +00:00
517687da81
Get the major no right for uscanner.
2000-10-14 12:36:05 +00:00
585c4dc3e6
Add missing -n option of sysctl(8) booted_kernel name retrival.
2000-10-14 07:33:39 +00:00
17e8cec25b
Use && and || for logical concatenations instead of -a/-o test operators.
2000-10-09 06:11:38 +00:00
15bcada9c3
- Remove extra 'rm -f' since file redirect safely clobbers existing files.
...
- Remove one sed invocation replacing it with shell internal construct.
2000-10-09 06:01:18 +00:00
a1cd6987aa
Use find(1) to search files in straight fashion with the cost of external
...
command invocation.
2000-10-09 05:33:53 +00:00
fb62520419
Avoid extra command invocation as possible, and use smart variable
...
substitution instead.
2000-10-09 05:30:17 +00:00
e4d2a57704
- avoid -a or -o logical operator of test command as possible. They would
...
introduce syntaxical ambiguousity, and having concatenation with && or
|| costs nothing because our sh(1) has test(1) builtin.
- use elif construct to avoid dungling else-ifs.
- while-read construct does not need enclosed by a sub-shell.
- variable detection could be done in eval args=\$ifconfig_$int
- smart variable substitution occationally saves lines and extra command
invocations.
2000-10-09 05:02:14 +00:00
0c70e530af
use ${foo##*/} instead of `basename $foo`. as suggested (with minor variation)
...
by Toru Nishimura <nisimura@itc.aist-nara.ac.jp>
2000-10-07 07:36:56 +00:00
68da9ad9ab
As we ship ssh in-tree now, replace the ssh startup example with one
...
for apache.
2000-10-07 00:22:44 +00:00
d745652834
add ripng (521 tcp/udp). PR 11139.
2000-10-05 15:19:58 +00:00
316c9bbfc5
the ssh pkgs now install a /usr/pkg/etc/rc.d/sshd, not
...
/usr/pkg/etc/rc.d/sshd.sh.
Whether the existence of this lines is useful with ssh in tree is
a seperate issue.
2000-10-05 12:46:34 +00:00
2e9564263d
Enable building of additional kernel sets.
2000-10-02 12:51:33 +00:00
bf69b1a900
Do the `distribution' target for usr.bin/ssh, too.
2000-10-01 22:31:04 +00:00
60d3ee1b34
remove unnecessary leading `$' on warnings printed for $required_dirs
...
and $required_files.
2000-10-01 10:10:18 +00:00
641a3c9378
support loading ipf6.conf as well as ipf.conf.
...
inspired by [misc/11033] by Gregory McGarry <g.mcgarry@ieee.org>
2000-10-01 05:58:06 +00:00
b5b6e95c7b
move default config files from /etc/default -> /etc/defaults, to be
...
consistent with what FreeBSD uses /etc/defaults for, and since SVR4
uses /etc/default for another purpose.
as discussed on tech-userlevel, and no objections were made.
2000-10-01 05:49:26 +00:00
6d52152500
move default config files from /etc/default -> /etc/defaults, to be
...
consistent with what FreeBSD uses /etc/defaults for and since SVR4
uses /etc/default for another purpose. as discussed on tech-userlevel,
and no objections were made.
2000-10-01 05:46:03 +00:00
ad22c8ecf6
Remove the udp entry for rsh-spx and the tcp entry for amanda.
2000-10-01 03:02:46 +00:00
5927169fa7
Mention "a.out" in the start message to be clear about the purpose of
...
this script.
2000-09-29 17:49:25 +00:00
ff795bd7a3
Add "MAKEDEV minimal" target for ramdisk builds
...
Tidy up a few comments at the same time.
2000-09-29 11:43:48 +00:00
01c5215d95
Fix typo in comment.
2000-09-29 00:53:41 +00:00
c949d8af3c
Always install sshd.
2000-09-28 22:16:15 +00:00
5aa0a5abb1
Prior art in naming would suggest INSTALL_SYSINST rather than INSTALL-SYSINST.
2000-09-28 12:46:43 +00:00
a912989e45
Add INSTALL_LAPTOP to kernels to be built.
2000-09-27 20:05:54 +00:00
c725dcdb09
RAW_PART == 10 on sgimips, so adapt memory disk entry for it.
2000-09-27 10:50:37 +00:00
03076560df
Fix memory disk entries (md?c -> md?d)
...
since RAW_PART == 3 on these ports.
2000-09-27 10:33:27 +00:00
60026b334e
rcd0d -> rcd0c since x68k port uses c for the ``raw'' partition
2000-09-27 03:41:12 +00:00
2dfc419b59
Add rsh-spx and amanda from the IANA list.
2000-09-25 12:42:57 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
d43acf7d93
Provide the option of running newsyslog at boot time; mainly for laptop
...
people.
2000-09-21 10:36:02 +00:00
6a676a7bb4
Note that rpcbind was formerly known as portmap. See PR 11055.
2000-09-21 10:15:33 +00:00
bd11504cb2
- only perform the checkyesno on the variable named in $rcvar (rather than
...
implicitly using $name if $rcvar isn't set), and always perform this check,
even when using start_cmd (et al).
this check is performed before the pidcmd
is run, speeding up scripts that weren't going to be run anyway.
this should speed up booting slow systems.
- take advantage of the above and remove
start_precmd="checkyesno foo"
in scripts that use start_cmd.
- explicitly set rcvar=foo in the rc.d/foo scripts which have an equivalent
rc.conf entry
- fix `rcvar' and `restart' when $rcvar isn't set.
these above changes fix PR [bin/11027].
- when doing `force*', ignore the return value of *_precmd.
this fixes PR [bin/10781].
- rename what sysdb provides from `databases' to `sysdb', to reflect
the name of the script.
- improve the comments in rc.subr
2000-09-19 13:04:38 +00:00
7d8e2a2ecb
etc files for evbsh3
2000-09-18 12:58:55 +00:00
82951d0f48
MD files for NetBSD/mipsco
2000-09-18 11:00:33 +00:00
eefbc5a70e
When building a release, build miniroot and installation notes automatically,
...
too. Patch by Michael Hitch.
2000-09-17 19:04:39 +00:00
1c61a5d083
On sendmail start, check modification time of /etc/mail/aliases
...
and couple of other common map files and regenerate appropriate
*.db files as needed.
Idea taken from RedHat 6.2.
2000-09-14 21:03:17 +00:00
9b2fc1ecc4
Create two devices for framebuffers that can have more than one card installed
...
Now a dual head cgsix box (for example) will work in X by default.
2000-09-14 10:00:32 +00:00
31d5237f30
Now that kpasswdd works from inetd, also correct the entry: kpasswdd is an
...
udp service, not tcp.
2000-09-13 11:34:57 +00:00
ff4b8473ae
Enable sram device, which is used by memswitch(8).
2000-09-12 15:00:06 +00:00
fd779f8fc8
Deal with the fact the local directory may not be writeable.
2000-09-12 05:11:10 +00:00
b4b75848de
Add standalone "iso-image" target that can be run with DESTDIR and RELEASEDIR
...
set in src/etc after a "make release" in both "src" and "xsrc", to create a
ISO-image of the release in $RELEASEDIR/installation/cdrom.
Hook for architecture dependent pre/post-processing in etc/etc.*/Makefile.inc
are available as 'iso-image_md_post' and 'iso-image_md_pre', see
etc/etc.i386/Makefile.inc as an example. Might be useful for setting up
bootable CDs on alpha, sparc, ...
Reviewed by Todd Whitesel and Thomas Klausner.
2000-09-11 21:53:30 +00:00
2605399d1e
Create ./usr/share/examples/kerberos so that `make install' works again.
2000-09-11 03:00:29 +00:00
eb47049370
We actually do know about KERNOBJDIR so use it.
2000-09-10 22:04:27 +00:00
b4266bbcb7
PR/10982: kilbi@rad.rwth-aachen.de: Don't confuse printf with usernames
...
that start with -.
2000-09-10 21:27:50 +00:00
cd0b41e240
modload: use kernel name obtained via sysctl machdep.booted_kernel if the sysctl
...
is available and file it points to is readable
2000-09-10 16:50:05 +00:00
9482480921
rename the old BSD `kpasswd' to it's secondary name `kpwd', since
...
`kpasswd' is officially assigned to another port
2000-09-10 14:43:28 +00:00
42655f8ee9
REQUIRE ipnat and mountd.
...
fixes PRs [misc/10958] and [misc/10959] by Mike Santos <mike@ethmoid.org>
2000-09-06 01:05:43 +00:00
f35cb8ff6d
Add an entry for optional dumpdates.
2000-09-05 05:48:54 +00:00
23551b0530
Run 'make release' in sysinst distrib dirs
2000-09-04 16:34:13 +00:00
0a7489b1e8
Enlarge RAMDISK to make it fit the installation fs again.
...
By Mike Pumford per port-arm32 mailing list..
2000-08-30 21:29:16 +00:00
e2f977d871
Add smaller install kernels.
2000-08-29 21:14:31 +00:00
389581c1cf
run skeyaudit, if run_skeyaudit is set to yes
2000-08-25 01:11:42 +00:00
2ea44b1dd4
install dosboot.com in the release(7) hierarchy.
2000-08-23 21:00:46 +00:00
3635b53ea7
As .ifndef RELEASEDIR checks for targets:
...
snap_pre snap_md_pre snap_md_post
so should .ifndef DESTDIR
2000-08-23 20:48:42 +00:00
6e3eddc4dd
Make the 3rd and 4th serial ports on a 4/300 work again - ttyc and ttyd are
...
now minors 2 and 3 respectively.
2000-08-23 10:43:08 +00:00
671e8ba97c
unxexpand -a
2000-08-22 11:31:28 +00:00
7396e4ef69
for PCIIDE users.
2000-08-22 05:33:27 +00:00
ebc99afce8
sort lines. add nonlocalswap, securelevel
2000-08-21 23:39:07 +00:00
e26f093e93
convert fsck.sh -> fsck (using kill -TERM $$ to stop autoboot).
2000-08-21 23:38:07 +00:00
b94d4bd809
sort REQUIRE lines
2000-08-21 23:36:50 +00:00
093b7f0ae5
remove BEFORE DAEMON
2000-08-21 23:35:41 +00:00
3f5134ff22
REQUIRE ipfilter and ipsec
2000-08-21 23:35:20 +00:00
8f896c47b9
`REQUIRE bootconf' in lkm1 rather than `BEFORE beforenetlkm' in bootconf.sh
2000-08-21 23:34:45 +00:00
a4517195f9
needs to run after mountcritremote, since ipnat is in /usr/sbin
2000-08-21 23:33:50 +00:00
d8b52eec28
support running /etc/rc.shutdown.local
2000-08-21 23:33:06 +00:00
ce3ce86261
migrate raising of securelevel from sysctl to separate securelevel script.
...
the latter depends upon aftermountlkm (but is required by DAEMON), so that
lkms may be loaded before the securelevel is raised.
noted by Rafal Boni <rafal@mediaone.net> in [bin/10780]
2000-08-21 23:31:24 +00:00
49533ad06e
don't start rc.d scripts with a `nostart' keyword
2000-08-21 23:09:50 +00:00
4e283949d1
remove rc.wscons
2000-08-21 23:07:11 +00:00
0c020b6812
migrate guts of these /etc/foo.conf config files into /etc/default/foo.conf,
...
and source the latter in the former. this makes it easier for a sysadmin to
upgrade the default files without affecting local config, and retains the
semantics that the /etc/foo.conf files are the actual files that are edited
(as opposed to /etc/foo.local.conf or /etc/foo.conf.local or whatever, which
isn't as intuitive).
2000-08-21 23:06:22 +00:00
801142dbde
- install files in etc/default/
...
- migrate rc.wscons to (already existing) rc.d/ wscons
2000-08-21 23:03:10 +00:00
09251753f6
migrate rc.wscons to (already existing) rc.d/wscons
2000-08-21 23:01:36 +00:00
cbba2db233
migrate default installation config files from /etc to /etc/default
2000-08-21 23:00:26 +00:00
aeebc796f0
add etc/default
2000-08-21 22:57:24 +00:00
54049fb460
remove rc.wscons
2000-08-21 22:57:11 +00:00
31a6224745
Move options into ntp_flags, to make it possible to add '-u' without
...
modifying rc.d/ntpdate
2000-08-21 14:48:39 +00:00
4c835d91f6
add ramdisk support
2000-08-20 14:48:32 +00:00
a96d29c7e3
support ${name}_nice even when using ${name}_chroot. per discussion with mrg...
2000-08-19 08:47:43 +00:00
31bec2bf20
Add lpt and com
2000-08-17 14:13:41 +00:00
0847f3e3f5
add support for ${name}_chroot, which chroot(8)s before running the command.
...
allow changing the user credentials to ${name}_user, ${name}_group,
and ${name}_groups as part of this. if ${name}_chroot is used, the following
variables won't work: ${name}_chdir and ${name}_nice.
[requested by mrg; whipped up in a few minutes on his terminal :-]
2000-08-17 11:07:10 +00:00
b1253dc369
synchronize with /etc/mail content.
...
NetBSD PR 10836 from koji@jp.above.net .
2000-08-15 14:48:23 +00:00
7342dfee1d
reorder "localhost" entry, to prefer ::1 than 127.0.0.1.
2000-08-15 09:33:05 +00:00
d2e1f953ef
make that "audio*" not "audio".
2000-08-13 15:37:09 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
8ecc16e026
Add the coda services.
2000-08-11 23:25:34 +00:00
01c441e0c2
Fix device creation for SCSI tapes.
2000-08-11 19:19:03 +00:00
e36c17d6c2
Have port-i386 use installation/floppy, for conformance with release(7).
2000-08-11 09:20:38 +00:00
5007ab036b
- sshd has a pid file, so take advantage of it
...
- support `reload' arg (using default of SIGHUP)
2000-08-10 22:49:43 +00:00
690a071d43
Need bsd.own.mk
2000-08-10 22:02:07 +00:00
0b1677de5f
- provide sshd not ssh
...
- don't start until after LOGIN (after NETWORK is way too early)
- KNF (as such :)
2000-08-10 01:41:09 +00:00
64fe1807a8
remove xy & xd support.
2000-08-09 10:54:20 +00:00
26aeddad0c
Add `swat' (Samba Web Administration Tool) services at 901/tcp.
2000-08-08 03:10:50 +00:00
81958d9213
Add kdc/kdc_flags variables.
2000-08-06 21:34:17 +00:00
f0c5d26a40
Startup script glue for the Heimdal KDC.
2000-08-06 21:32:56 +00:00
6636b19ffd
Add (commented out) hprop service, along with a short explanation
...
of when to enable it and why.
2000-08-06 20:35:13 +00:00
eb8931bc84
Add `hprop' service (754/tcp).
2000-08-06 20:12:19 +00:00
4ed8b47725
Do not create the binary/security directory, there is no seperate
...
security set anymore.
2000-08-06 18:10:48 +00:00
4bfab7fc50
/var/krb5kdc -> /var/heimdal
2000-08-06 17:15:47 +00:00
7a41932873
for make snapshot
2000-08-06 16:11:32 +00:00
ac1bd4275a
Remove the (not supported) krbupdate service, and add (commented out)
...
kerberos-adm.
2000-08-05 00:48:15 +00:00
75713daa92
Add ISAKMP.
2000-08-03 22:58:37 +00:00
a8c7e91153
As discussed with Hubert Feyrer in private mail, install UTC as the default
...
time zone; while amounting to the same offset, the time zone 'name' of
Factory violates the prinicple of least surprise.
2000-08-03 13:00:02 +00:00
343777f0d3
Change default timezone from US/Pacific to Factory:
...
Before:
Wed Aug 2 06:53:04 PDT 2000
After:
Wed Aug 2 13:52:52 Local time zone must be set--see zic manual page 2000
2000-08-02 14:40:45 +00:00
e9b5e5d87c
fix comment on DAD wait
2000-08-02 13:59:11 +00:00
dcefdf7722
Adjust comment to what's actually being done
2000-08-02 11:07:51 +00:00
8451f00774
we need to sleep for IPv6 DAD period, before and after rtsol.
...
(they are for stability in boot-time configuration)
comment from perry.
2000-08-01 20:49:11 +00:00
d6662ec62f
Change name of precmd from start_precmd to sshd_precmd. While it worked
...
fine as was, the result was the line `start_precmd=start_precmd' which
looked odd. Pointed out by Bernd Ernesti.
While here, add NetBSD RCS Id.
BTW, to clarify, as people have asked: this script does not support
pkgsrc/security/sshd -- that package comes with a perfectly fine rc script
which in addition to supporting /etc/rc.d can also be used with 1.4.X.
This script will not trivially work with the ssh package as it a.) calls
the ssh commands at the pathnames they will be installed at by usr.bin/ssh,
and b.) generates a DSA key as well as an RSA key.
2000-08-01 14:28:32 +00:00
f3983ea4df
Correct apparent past-o: RSA -> DSA
2000-07-31 21:43:52 +00:00
5da8f604df
Add $sshd and $sshd_flags for use by both usr.bin/sshd and pkgsrc/security/{open,}ssh
...
As a precedent, note the presence of $gated, even though we do not distribute
gated outside of pkgsrc.
2000-07-31 20:47:41 +00:00
5cfec6f11d
An sshd startup script for use with usr.bin/sshd. Installation is conditional
...
on ${SSHDIST}, as with usr.bin/ssh itself.
This script includes a `keygen' target for regenerating RSA and DSA host keys,
and invokes this if these keys are not present when sshd is started up.
2000-07-31 20:39:41 +00:00
fcf381833d
actually make use of new features introduced in man.c (rev 1.23):
...
allow to specify relative paths for sections in man.conf - they are used
similarily to _subdir, but only when appropriate
2000-07-31 00:26:48 +00:00
c438e69177
if update_motd is set, do not gratuitously force it to have an empty line
...
in it. also be a bit smarter about deleting stuff from motd during
update. it is now possible to have a one line motd just like in SunOS.
2000-07-31 00:17:05 +00:00
ea8a88f609
syslog requires databases from sysdb which creates /var/run/utmp.
2000-07-29 21:50:20 +00:00
d13496d33e
md0c -> md0d.
2000-07-29 10:56:19 +00:00
023a7f381f
add back check to .rhosts cat -f avoids the security hole.
2000-07-28 21:38:43 +00:00
martin