Commit Graph

61799 Commits

Author SHA1 Message Date
erh 671a37a17f Add a buildmsg target for build to depend upon instead of using an ifmake block. "make snapshot" now echos the start of build time. 2000-02-29 21:54:03 +00:00
thorpej 04d9239b1e Reset mc_received after we've done a badaddr probe. 2000-02-29 21:42:54 +00:00
augustss 7d05674ba7 Distinguish between device and interface classes.
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
itojun d74f882e9b sync comment for sourceroute() to reality 2000-02-29 19:36:43 +00:00
hubertf f6754feada add 3com homeconnect (3c460) 2000-02-29 19:23:23 +00:00
itojun c47506aed1 more fix to ancillary data alignment. we need padding after
last cmsg_data item (see the figure on RFC2292 page 18).
2000-02-29 19:14:59 +00:00
augustss 806ca507b5 Add 3Com 3c460 2000-02-29 19:14:43 +00:00
augustss 8cc92d88cf Add USB tty device. 2000-02-29 19:08:54 +00:00
hubertf a6a5be8ccf This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
augustss ab5e19cc9f Make /dev/usb, a node where USB events can be read.
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
hubertf b95fbdaeb7 Regen 2000-02-29 19:07:33 +00:00
hubertf eff003f7ce add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
augustss 66ee7c2e15 No need to make audio devices twice in all. 2000-02-29 18:48:05 +00:00
itojun fe31f96aea fix alignment constraint in IPv6 routing header manipulation (ancillary data).
documented in RFC2292.
from: shin@kame.net
2000-02-29 18:24:31 +00:00
matt 352a87f7bd fix a too agressive s/CIA/UBA/ (e.g change SPEUBAL back to SPECIAL) in the
header.
2000-02-29 17:42:32 +00:00
matt 8aaab5c387 add missing cpu dependencies 2000-02-29 17:13:27 +00:00
oster 8cde772948 Oops.. Need to note the parity status when we unconfigure.
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
itojun 5c1b7efe97 avoid copy-overwrite-copy on incoming udp4 checksum. use in4_cksum
which takes care of pseudo header checksum without overwrites.
2000-02-29 16:21:56 +00:00
nonaka 37eb9eebc2 Initial import prep port. 2000-02-29 15:21:20 +00:00
ad c09a9a072f Oops, pasto. 2000-02-29 11:14:46 +00:00
nisimura 6f5dadba1c Cleanup warning comment which is now irrelevant. Reorder codes. 2000-02-29 09:03:30 +00:00
nisimura d93aaefb84 - Have SYS_DEV_xxx device cookie symbols to select and install proper
interrupt handlers into intrtab[] array, rather than the idea of devices
  in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 07:20:21 +00:00
simonb 4eb55e447c Do the "<space><tab>" thing with the RAID_AUTOCONFIG option. 2000-02-29 06:32:20 +00:00
itojun 82ab98145f ensure tcp window size does not overflow (16bit unsigned after window scale).
FreeBSD PR: 16914
2000-02-29 05:25:49 +00:00
nisimura a6e403e50b Remove unnecessary cast for kernend variable when grabbing proc0 USPACE. 2000-02-29 04:55:54 +00:00
nisimura 7eeaa2a1fa NLE_PMAX symbol in le_pmax.h has gone. 2000-02-29 04:44:29 +00:00
nisimura 582e9de235 - Have SYS_DEV_xxx device cookie symbols to select and install proper
interrupt handlers into intrtab[] array, rather than the idea of devices
  in 'psuedo' TURBOchannel slots.
- Nuke symbols for psuedo TC slots.
- Abandon never/unlikely used intr_disestablish()s.
2000-02-29 04:41:47 +00:00
mhitch 19c22771f3 Check and clear the appropriate IOASIC SCSI interrupt bits when in polled
I/O mode.  Kernel dumps will now work with the IOASIC SCSI devices.
2000-02-28 18:51:25 +00:00
thorpej d788e0dbad Make sure to initialize xs->req_sense_length (to 0). This appears to be
a historical leftover, and very few drivers actually look at it.  But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
chopps fe7be4eb7b el_insertstr takes a "const char *" not "char *" now as it doesn't modify
the argument.
2000-02-28 17:41:04 +00:00
itojun f539e10ff8 enable IPv6 ftp and telnet by default.
it makes more sense to me as we have INET6 in kernel, and we have ftp4/telnet4
enabled by default.  maybe I'm biased:-)
2000-02-28 17:25:42 +00:00
jwise e7adfd2136 Add missing pkg name 2000-02-28 16:31:08 +00:00
itojun 03f0ac370f make ICMPv6 redirect actually flush route cache in udp6/raw6 socket. 2000-02-28 16:10:52 +00:00
enami f8796b1a66 Remove reference to config(8) from SEE ALSO list. 2000-02-28 14:32:53 +00:00
enami 61b07296fe With SEE ALSO list, add swapctl(2) and swapctl(8) and remove config(8). 2000-02-28 14:30:54 +00:00
itojun d8dfd96b2c fix ICMPv6 redirect input. the bug can result in invalid ND entry. 2000-02-28 14:30:36 +00:00
enami 354b4bc5c1 Sync wi/ reality. 2000-02-28 14:21:46 +00:00
enami f5419e2136 Sort SEE ALSO section first by section. 2000-02-28 13:54:55 +00:00
itojun 9a400bfce1 support ping6 -a c
(request IPv4 mapped/compatible addrs from
draft-ietf-ipngwg-icmp-name-lookups-05.txt)
2000-02-28 13:50:04 +00:00
itojun cdea88d700 support draft-ietf-ipngwg-icmp-name-lookups-05.txt, drop support for
draft-ietf-ipngwg-icmp-name-lookups-04.txt.

There are certain bitfield change in 04 draft to 05 draft, which makes
04 "ping6 -a" and 05 "ping6 -a" not interoperable.  sigh.
2000-02-28 13:48:50 +00:00
enami 833abddadd Sync the SYNOPSIS for tlp at cardbus wi/ reality. 2000-02-28 13:44:53 +00:00
enami 018973035f - Add a necessary period.
- Make sentences are separated by two spaces.
- Add Melco WLI-PCM-L11 in hardware list.
2000-02-28 13:28:42 +00:00
takemura 32817a3257 WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong. 2000-02-28 12:34:31 +00:00
itojun bbe25244d0 remove some of cross-BSD portability #ifdef.
remove xxCTL_VARS, which is BSDI specific.
2000-02-28 12:08:21 +00:00
jdolecek d28bd11715 unix2dostime(), dos2unixtime(): use value of rtc_offset to shift the time value
accordingly

Patch sent by Naoki FUKAUMI in kern/9497.
2000-02-28 10:43:08 +00:00
joda c627d45cc3 (fxp_init): don't clear the FXPF_MII flag as this results in a panic
when detaching
2000-02-28 10:16:17 +00:00
lukem 8575d2f491 only use IPTOS_ setsockopt()s if they're defined (e.g, SunOS doesn't).
from Havard.Eidnes@runit.sintef.no
2000-02-28 10:12:27 +00:00
enami bdc53e3b9f Unlink an existing symblic link when creating a symblic link. 2000-02-28 10:00:57 +00:00
itojun 8dc6ef70e7 don't assume CMSG_xx are constant. (sync with latest kame) 2000-02-28 09:55:45 +00:00
ad a06aabf7a9 Say that it does use features like RAID, and briefly explain how it's
accomplished. Noted by a couple of people that it might not be obvious.
2000-02-28 09:46:57 +00:00