53cff1c1e5
fix typo.
2000-03-11 09:11:33 +00:00
531586bc96
fix frame buffer type (normalized to 'black on white').
2000-03-11 09:05:17 +00:00
a56d95d08b
fix PV-6000/C-1000 keycode mapping.
2000-03-11 08:53:33 +00:00
b7a1ee6c84
configure controller 0 only (workaround for phantom PCIC).
2000-03-11 08:51:55 +00:00
06f85d40f0
change about VRIPDEBUG. no action changes.
2000-03-10 09:18:00 +00:00
67e7cb40b1
fix print message when #undef VRGIUDEBUG and change a little.
2000-03-10 09:05:01 +00:00
79d83d72e1
printf -> DPRINTF
...
vrisa_debug = 0 by default.
2000-03-10 01:30:06 +00:00
fe02fcfe1e
GENERIC configration includes Cassiopeia E-55 CF card support.
2000-03-08 14:53:33 +00:00
5913106c36
add '%INCLUDES'.
2000-03-07 04:17:27 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
5c2ef51018
Add '\Storage Card1\netbsd'.
2000-03-06 13:24:12 +00:00
84b24dcb3a
cosmetic change.
2000-03-05 10:03:16 +00:00
775240e015
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 08:49:06 +00:00
45db29b1b3
Delete #ifdef USE_RASTERCONS lines, which are not used.
2000-03-05 06:24:33 +00:00
303401ce32
Change bus_addr_t and bus_size_t from u_int32_t to u_long.
...
Add -Werror option to kernel Makefile.
2000-03-05 05:22:12 +00:00
2aad5afc67
Add ISA DMA support entries. (It's dummy. I don't know if it work or not.)
2000-03-05 04:34:06 +00:00
062700843c
Make it easier to cross-compile with this. moreover.
2000-03-04 19:52:26 +00:00
937f50798e
adjust retry count for TX3922
2000-03-04 19:36:34 +00:00
06f8a39446
timeout when DMA interrupt lost.
2000-03-04 19:35:36 +00:00
ac09284927
Change 'irq' locater encoding. You can use port# 0. You should use 0xff
...
for unspecified port#. Also, You can specify interrupt level/edge, high/low
and through/hold.
2000-03-04 13:43:19 +00:00
bac061b47f
sync with my latest.
2000-03-04 11:41:48 +00:00
461e3d82a4
adjust SIBSCLK to 9.216MHz (TX3922)
2000-03-04 11:39:29 +00:00
630279a800
add device file interface for UCB1200
2000-03-03 19:54:34 +00:00
8e89a8db7e
cosmetic change
2000-03-03 17:09:57 +00:00
8cc92d88cf
Add USB tty device.
2000-02-29 19:08:54 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
dc8f1b2cb9
UCB1200 GPIO support.
2000-02-27 16:37:50 +00:00
c26429fac5
UCB1200 GPIO routines.
2000-02-27 16:34:13 +00:00
fc0a27a970
cosmetic changes
2000-02-27 16:28:13 +00:00
b22af17c02
Add 'Sharp HC-1200' and divide MC-CS1x into MC-CS11, 12 and 13.
2000-02-27 05:47:34 +00:00
e0f169f58e
change power up sequence.
2000-02-26 15:16:19 +00:00
d4c8fabc4a
fix lost interrupt bug.
2000-02-26 15:14:19 +00:00
2d3ab1ef0c
stop memory probing at first memory image.
...
this is necessary for MC-CS12.
2000-02-25 11:20:20 +00:00
54ffe9e871
Only pay attention to controller 1 on the pcic. It appears that on this
...
machine it mirrors (but is not usable as) controller 0.
XXX Need to find a way to detect this automatically.
2000-02-25 05:28:42 +00:00
01ef320ff1
Add `\My Documents\' to the menu of kernel locations.
2000-02-25 03:38:59 +00:00
108b65903a
Fix an obscure bug:
...
If we enter DDB from the keyboard, kc_scandata[] wasn't updated before the
debugger was entered, and the first call to cngetc() would see the ESC and
stack another DDB entry on top. This was... poor.
2000-02-25 00:42:47 +00:00
71b18d9041
Make it easier to cross-compile with this.
2000-02-24 21:59:13 +00:00
d7e9d324f9
reflect recent <mips/types.h>: mips is now vm_offset_t/vm_size_t clean
2000-02-22 12:29:56 +00:00
7a91879a6d
delete warning.
2000-02-22 04:11:24 +00:00
26f41e8f13
support non-contiguous memory.
...
patch from Mycroft <root@ihack.net> and uch@netbsd.org .
tested hardware:
VR4121 IBM WorkPad z50 (48MB, 16MB)
VR4121 NEC Mobile Gear II MC/R730
TX3912 Compaq C-series 810 (20MB), 2010c (20MB, 16MB)
TX3922 Sharp Telios HC-AJ2 (32MB)
2000-02-21 13:46:02 +00:00
fa120e391e
On [port-hpcmips-ja@jp.netbsd.org:1764]
...
suz@hpc.bs1.fc.nec.co.jp (Koji Suzuki) writes
Sample configration for cassipeia E-55 & E-500
// wdc1 line deleted from original.
2000-02-19 15:01:33 +00:00
fb5d3e9da4
Enable DDB history.
2000-02-19 06:58:28 +00:00
e7cfaf8f5b
Actually, it looks like the mouse is there.
2000-02-18 23:11:20 +00:00
640bdcd6cf
Document some things that are missing.
2000-02-18 23:10:01 +00:00
f1d350ea27
Somewhat scaled-down config for a WorkPad.
...
Uses WSEMUL_SUN so I can get multi-line scrolling.
2000-02-18 20:52:15 +00:00
fec6c976f3
Make the z50 tab key work.
2000-02-18 06:54:47 +00:00
c41cbbb8b7
Fix obvious typo.
2000-02-17 22:16:31 +00:00
760d110b96
Regen.
2000-02-17 21:31:39 +00:00
b95959c4c8
Give platid_name_table_size a type.
2000-02-17 21:31:13 +00:00
14af97fa26
add Sharp HC-1200
2000-02-14 07:22:19 +00:00
shin