31f199d4e6
Added earlier forgotten MACHINE_ARCH, pointed out by Arne Henrik Juul.
...
Cleaned up a bit.
1995-12-04 22:32:53 +00:00
76b94759a1
Fix from Paul Goyette (paul@pgoyette.bdt.com) for drives that don't grok
...
linked commands.
1995-12-04 02:10:44 +00:00
fc587cf917
Something forgotten in the namespace changes.
1995-12-03 14:34:24 +00:00
70875fa68f
Return a more sensible errno when someone is trying to set the unsupported
...
mdmbuf option.
1995-12-03 14:32:39 +00:00
99e494a984
Fix from Niklas Hallqvist / Chuck Cranor / Michael Hitch / OpenBSD to avoid
...
integer overflow in initial pmap setup. Triggerred by high values for
maxusers.
1995-12-03 13:52:50 +00:00
52ec09e420
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
1995-12-02 18:21:49 +00:00
deb00c27b3
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to
the softc rather than a unit number.
Pointers to hardware and software constructs are now stored per port
in each instance of the softc (one softc per board) rather than indexed
by minor number.
1995-12-02 18:18:50 +00:00
41cf6f071f
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting the drivers ready for new config.
Clean up namespace, remove several instances of global arrays. Instead,
use a softc to carry state around. Where possible, pass a pointer to the
softc rather than a unit number.
1995-12-02 18:15:50 +00:00
3ac76475ea
Use a "match/attach" rather than "init" scheme for probing devices.
...
This is a step towards getting drivers prepared for new config.
1995-12-02 18:11:21 +00:00
de5ce5f48c
Change "hilloop" to "hilsoftc" and make slightly more new config-friendly.
...
Remove all uses of curproc.
1995-12-02 02:48:47 +00:00
b618522128
Make the DMA controller driver a little more new config-friendly. Still
...
more work to do, but this is a step in the right direction.
1995-12-02 02:46:45 +00:00
5f2ab2109f
Use files.fpe
1995-12-01 19:53:07 +00:00
ca1cc64e20
Remove forgotten #endif
1995-12-01 19:51:53 +00:00
45d824de05
DELUA/DENUA & DELQA/DEQNA Ethernet adapters converted to new config.
1995-12-01 19:37:55 +00:00
2e654caa73
UBA converted to new config. (uba's now can be *'ed). Bug causing
...
DMA writes to nonexistent memory pages fixed. Code for old config
of non-mass-storage devices removed. (they now must use new config).
1995-12-01 19:22:56 +00:00
1b03745209
cmdlen-2 is right for the last byte of the command. Ifdef out for right now,
...
though, as some devices apparently don't support linked commands and will
reject commands that have the link bit set in them.
1995-12-01 15:14:11 +00:00
8a1606d530
Don't return `XS_DRIVER_STUFFUP' too easily; this can hose buffer cache
...
writes. Say XS_TIMEOUT in stead so the scsi code will retry.
1995-12-01 01:00:55 +00:00
e267646321
KNF-ify
1995-11-30 21:55:01 +00:00
291d8cbf3a
Add kernel option for separate {stat,prof}clock
1995-11-30 21:52:46 +00:00
d416ec2cc9
Put the link flag in the right place.
...
Pointed out by Paul@pgoyette.bdt.com (Paul Goyette).
1995-11-30 14:25:40 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
a2a4da4874
Merge changes from sun3 port; per Gordon.
1995-11-29 23:43:42 +00:00
ee08e9085b
Extend the size of the "soft" FIFOs which reportedly reduces the number
...
of FIFO overflows on high baud rates.
However, doing so on all 4 ports would cost a whopping 64KB (at 4096 entries
per FIFO) of kernel memory. So, the FIFOs are now allocated at attach time
allowing the size for the keyboard and mouse ports to be reduced (to 128)
which should be adequate for the 1200 baud they use.
1995-11-29 23:41:31 +00:00
12bfe2e68e
Must change `u_long' to `u_int32_t' as Jason pointed out.
1995-11-29 22:03:53 +00:00
6e53c6a5fd
In probe[gs]et() there's no need to check against KERNBASE, as pointed
...
out by David Jones and Chris Torek.
1995-11-29 01:52:41 +00:00
e9a919b88f
Code from Jason to better configure /dev/fb.
1995-11-29 01:45:36 +00:00
ce474272f1
Prevent synch negotiation on ESP100 chips
1995-11-28 22:49:31 +00:00
9bf3251e46
Lots of major and minor bug fixes and changes.
...
- properly do MSG_IN handshaking, so we can actually receive multi-byte msgs.
- do synch negotiation (now that the above works).
- handle disconnects.
There are a few trial-and-error bits at points where the docs I have are
particularly ambiguous about the state of chip and/or SCSI bus.
Things to do:
- more cleanup
- deal with MSG_OUT phase better
- keep some "config reg 3" bits per target (ie. FASTCLK and FASTSCSI).
1995-11-28 20:49:12 +00:00
def161af38
Careful with signed chars (caddr_t *!).
...
Merge in 1.1 changes.
1995-11-28 20:26:59 +00:00
da66c0a255
Enable COMPAT_HPUX.
1995-11-28 08:48:18 +00:00
38b63746fb
Note the new status of COMPAT_HPUX, but keep is disabled by default.
1995-11-28 08:47:38 +00:00
63b0022b86
Update a #include for the "new" location of HP-UX emulation code.
1995-11-28 08:12:37 +00:00
ffcccc41bd
Compile compat/hpux/hpux_exec.c and compat/hpux/hpux_file.c if COMPAT_HPUX
...
is defined.
1995-11-28 08:10:09 +00:00
29d9eeabd1
kill these. they're no longer used.
1995-11-27 23:28:00 +00:00
e2baea19f3
Make sure vt_coldinit() is called before vt_coldmalloc().
1995-11-26 21:01:16 +00:00
55980119ec
Remove some cruft
1995-11-25 10:39:57 +00:00
8b29652e06
Fix colormap initialization for monochrome pmax framebuffer
1995-11-25 10:38:42 +00:00
db99c1a30b
Provide compiler tool definitions for cross compilation.
1995-11-25 05:55:38 +00:00
afc45b4ab7
pull in ECOFF exec code with EXEC_ECOFF
1995-11-25 01:34:38 +00:00
93a78af882
no DDB
1995-11-25 01:32:34 +00:00
e6dc5f55db
update for am7990var.h, am7990.c changes
1995-11-25 01:31:09 +00:00
0f7f390b49
allow bus-specific lance drivers to use machine-independent buffer/descriptor
...
copy functions, and convert isa and pmax drivers to do so.
1995-11-25 01:23:51 +00:00
deb4082f80
wholesale update from my NetBSD/Alpha source tree. Includes:
...
Support for AXPpci CPUs,
Support for AlphaStation 600 CPUs,
new boot block structure, which requires an 'installboot'
program and works a lot like the NetBSD/sparc boot blocks.
1995-11-23 02:33:17 +00:00
93d836857c
RAMDISK stuff.
1995-11-21 05:06:28 +00:00
447b897889
Define DST and TIMEZONE
1995-11-21 05:05:51 +00:00
e5a588356f
Small RAMDISK kernel.
1995-11-21 05:02:02 +00:00
369e3de013
Get rid of obsolete time specs.
1995-11-21 05:00:34 +00:00
f9ba6adcd7
Add rd_root.c from sun3.
1995-11-21 04:53:20 +00:00
0d91c3ff0b
Back the sccClkConst off to 115200 for several classes of machines.
1995-11-21 04:00:43 +00:00
9afe66efa5
Add rd support at the same address as the Sun3.
1995-11-21 03:39:45 +00:00
b92924680d
Garbage collect some stuff that isn't used. Rename the relocation info
...
structure to be consistent with the other m68k ports. XXX that struct needs
to move to an m68k common file.
1995-11-20 01:15:26 +00:00
df59198ddc
Put doshutdownhooks() in the right place. Pointed out by cgd.
1995-11-20 00:58:54 +00:00
8272af3168
Re-arrange boot() a bit; call doshutdownhooks(), if we're rebooting, say so,
...
etc. Modeled after the alpha port's boot().
1995-11-19 23:24:15 +00:00
8122bc0e33
Prevent the ITE_ACTIVE bit from being cleared in iteoff() if the ITE_ISCONS
...
bit is set. Works around the fact that the last process to have the
console open exits, the bit is cleared, and "syncing disks...", etc. is
not seen if the system is rebooted with reboot(8). Fixes PR #1455 .
1995-11-19 23:14:22 +00:00
31430a5279
Cosmetically change one #include directive.
1995-11-19 22:32:38 +00:00
905cb9dda1
Re-arrange things such that we can print out disk geometry regardless of
...
COMPAT_NOLABEL.
XXX One day when the world doesn't assume DEV_BSIZE bytes/sector, we'll be
able to actually use the stuff sensed from the drive, rather than a table.
1995-11-19 19:07:18 +00:00
d0e01feb5c
Do an indirect driver a little more like an indirect driver would like to
...
be done. Set up a structure filled with function pointers in the
controller-specific probe routines, and jump through them, instead of
if()'ing our way though each operation.
Be a little more discriptive; print out the controller type found
during the probe in a way that's somewhat meaningful.
1995-11-19 17:57:15 +00:00
86f10d8343
Switch to ncr_si (will just do PIO for now) and cleanup
1995-11-17 23:31:11 +00:00
0ee10ff487
Give translated label a valid magic number
1995-11-17 23:30:19 +00:00
c01eb77976
cosmetic
1995-11-17 23:29:30 +00:00
5d5c8d0d4b
Latest, greatest version of the new NCR driver.
...
DMA works! Interrupts work! Disconnect/reselect works!
To be paranoid, leave that all disabled for now...
1995-11-17 23:27:41 +00:00
6b20139b41
Add copyright
1995-11-17 23:24:56 +00:00
92b8a2d9e5
just cleanup
1995-11-17 23:23:44 +00:00
ce0b404f4e
fixup copyright notice before the release
1995-11-17 06:47:27 +00:00
e9ef628234
don't link against libkern, so that boot blocks will work properly.
...
(pulled down from 1.1 release branch.)
1995-11-16 22:38:16 +00:00
0c031adc76
Not all v2 proms understand the `mac-address' word (from Theo).
1995-11-14 15:04:01 +00:00
83604dcbd6
Add call to doshutdownhooks() before we attempt to reboot.
1995-11-14 04:05:49 +00:00
826b97635f
No longer needed; interrupt vectors now dynamic allocated.
1995-11-12 15:19:49 +00:00
bfc2ca40b8
Function call definition on stack. (calls frame)
1995-11-12 15:07:30 +00:00
763fd0a011
Macros for locore mapping added.
1995-11-12 14:41:41 +00:00
d96cac4b8e
pt_entry_t now struct pte. cleanup.
1995-11-12 14:40:26 +00:00
e6db353726
extern struct scb *scb; added.
1995-11-12 14:38:31 +00:00
7aac03e745
11/750 specific things moved to ka750.h
1995-11-12 14:37:18 +00:00
2a23f39e82
struct ivec_dsp for interrupt vector allocation added.
1995-11-12 14:33:11 +00:00
c7d1d39b3e
dk_device => device in controller structure (noted by Jason Thorpe).
1995-11-11 21:12:50 +00:00
70065d9d16
Fix a comment while I'm here...
1995-11-10 22:05:52 +00:00
01655dec81
Need to define KERNTEXTOFF for kvm_mkdb
1995-11-10 22:04:48 +00:00
3dcdca7c52
Allow unit != 0
1995-11-10 21:59:30 +00:00
c0aaa86553
Add a config line for 3c590 ethernet cards
1995-11-10 19:34:54 +00:00
f51faf62ac
Dynamic allocate uba_softc and interrupt vectors.
...
Allow for more that one uba.
1995-11-10 19:25:46 +00:00
d16c357ab9
A couple of CPU specific defines moved away.
1995-11-10 19:14:43 +00:00
c9be4b2e09
Removed some warnings.
1995-11-10 19:09:56 +00:00
42edf9d2b4
_idsptch added, _physcopypage removed.
1995-11-10 19:08:59 +00:00
eca544e6fc
sysarch() -> sys_sysarch.
1995-11-10 19:07:16 +00:00
ae0f1d45d8
Allow for dynamic allocation of interrupt vectors.
...
COMPAT_RENO removed.
Handle memory errors.
uap->sigcntxp -> SCARG(uap, sigcntxp)
1995-11-10 19:05:46 +00:00
33bd27fa3c
Major rewriting of pmap_bootstrap; CPU dependent allocations moved
...
to related file.
1995-11-10 18:52:54 +00:00
051bb183e3
Same as in 1.1 branch.
1995-11-09 08:40:51 +00:00
c2cd05605d
UFS => FFS conversion.
1995-11-08 09:09:20 +00:00
3c996d6b06
ufs ==> ffs
1995-11-07 23:01:40 +00:00
54ec9fb697
Correct test for sun4 machines (thanks Chuck).
...
Since uname currently does not allow to discriminate different sparc
models, we use `sysctl.hw.cpumodel' to do this somewhat heuristicly:
if the returned strings starts with "SUN4-" a sun4 architecture is
assumed. This information is used to determine whether or not to strip
the a.out header off the 1st-stage bootblocks.
1995-11-07 11:45:24 +00:00
3b8542c63a
The Falcon needs a delay after writing the dma_data register (Thomas Gerner)
1995-11-06 21:13:38 +00:00
f028be21e6
Update from Ken Nakata.
1995-11-05 04:23:00 +00:00
8b79bcb9e7
Fixes from Ken Nakata. Mainly renaming debug_level to fpu_debug_level.
1995-11-05 00:35:09 +00:00
996526aa02
Make error recovery actually work, i.e. don't hang on SCSI bus resets
...
and re-synchronize before re-scheduling pending operations.
Things seem to be a fair bit stabler now.
1995-11-03 16:47:43 +00:00
bbdb422873
Stop DMA before resetting
1995-11-03 16:34:12 +00:00
3095b6514c
No need anymore.
1995-11-03 14:34:52 +00:00
46e32a9703
No need for this file anymore; it's defines moved to other places.
1995-11-03 14:29:23 +00:00
cc272f90a1
Add in NetBSD id string.
1995-11-03 04:51:51 +00:00
5b38a18f42
include files.fpe instead of just fpu_emulate.c--to get the new fpe code.
1995-11-03 04:50:21 +00:00
526615e592
Add NetBSD id string and update instructions.
1995-11-03 04:48:22 +00:00
ragge