Fix so that resource wait queueing works.
Changed all functions to take a pointer to uba_softc instead of unit
number, except for ubareset(). This must be done later.
profiling enabled. (named the same as what GENERIC kernel
would be named if configured with config -p, which would end up
generating the same kernel as this.)
figure out the correct IRQ for the ethernet on the AlphaStation 500.
That code is enabled via KN20AA_BOGUS_IRQ_FROB (but hopefully won't be
needed any time soon, and won't link w/o slight changes to other code).
Basically, when establishing an interrupt that we don't know what to
do with, prompt the user for what interrupt line to enable. If you
get stray interrupts when you try to use the device (but not before),
then you've got the right line.
found on the AlphaStation 600), and interrupts on interrupt line 13.
Thanks to Andrew Gallatin for booting a test kernel 32 times (trying
each interrupt line, looking for the right one) to find this.
definitions.
* Include <mips/cpuregs.h> in <cpu.h> so kern_clock.c has user/kernel
status bits in scope. Still needs work; r2k/r4k previous-mode bits
are different.
* Include <mips/mips_param.h> in pica/include/param.h, for locore declarations,
and definitions of vm and other constants that should be shared across
NetBSD/mips systems to esnsure user-level binary compatibility.
* include <mips/locore.h> where callbacks into locore are made, to get
prototypes in scope. Cast calls appropriately.
* include <mips/cpuregs.h>, not the old Sprite-derived <machine/machConst.h>.
machConst.h is deprecated.
* dk_establish() must return void, not int.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
mapping code. (instead of using a "slot" and multiplying by 4 and adding the
pin number later to get the IRQ, just use base IRQ value and add the pin
number.)
comment immediately preceding it: We have to take the most significant
"numbits" from the returned value "ph", and the rest from our addr. The
addition used previously introduced a carry which was causing great
difficulty in determining the correct PA of the framebuffer VA passed in
by the booter.