1. If an adaptor sends repeated fragments indicating HCI_PACKET_START,
we would leak mbufs. Fix that by releasing the previous in that case.
2. If an adaptor sends fragments which overflow the expected total
payload length, it could build up the pending packet to use up system
mbufs. Fix that by changing the unsigned calculation to a comparison
and rejecting oversize packets
These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.
HOWEVER! Some subsystems have
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.
To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.
I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:
cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))
It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.
Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)
and that any data supposedly copied out is valid before use.
prompted by maxv@, I have checked every usage of m_copydata() and made
the following corrections
hci_event.c:
hci_event_command_compl()
check that the packet does contain enough data for there to
be a status code before noting possible failures.
hci_event_num_compl_pkts()
check that the packet does contain data to cover the
stated number of handle/num pairs
l2cap_signal.c:
l2cap_recv_signal()
just ignore packets with not enough data rather than
trying to reject them (may not have cmd.ident)
l2cap_recv_command_rej()
check we have a valid reason and/or data before use
nam parameter type from buf * to sockaddr *.
final commit for parameter type changes to protocol user requests
* bump kernel version to 7.99.15 for parameter type changes to pr_{send,connect}
pr_{accept,sockname,peername} nam parameter type from mbuf * to sockaddr *.
* retained use of mbuftypes[MT_SONAME] for now.
* bump to netbsd version 7.99.12 for parameter type change.
patch posted to tech-net@ 2015/04/19
* update protocol bind implementations to use/expect sockaddr *
instead of mbuf *
* introduce sockaddr_big struct for storage of addr data passed via
sys_bind; sockaddr_big is of sufficient size and alignment to
accommodate all addr data sizes received.
* modify sys_bind to allocate sockaddr_big instead of using an mbuf.
* bump kernel version to 7.99.9 for change to pr_bind() parameter type.
Patch posted to tech-net@
http://mail-index.netbsd.org/tech-net/2015/03/15/msg005004.html
The choice to use a new structure sockaddr_big has been retained since
changing sockaddr_storage size would lead to unnecessary ABI change. The
use of the new structure does not preclude future work that increases
the size of sockaddr_storage and at that time sockaddr_big may be
trivially replaced.
Tested by mrg@ and myself, discussed with rmind@, posted to tech-net@
switches and put into separate functions
- always KASSERT(solocked(so)) even if not implemented
(for PRU_CONNECT2 only)
- replace calls to pr_generic() with req = PRU_CONNECT2 with calls to
pr_connect2()
- replace calls to pr_generic() with req = PRU_PURGEIF with calls to
pr_purgeif()
put common code from unp_connect2() (used by unp_connect() into
unp_connect1() and call out to it when needed
patch only briefly reviewed by rmind@
separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
into seaparate functions
xxx_listen(struct socket *, struct mbuf *)
- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.
patch reviewed by rmind
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
switches and put into separate functions
xxx_sendoob(struct socket *, struct mbuf *, struct mbuf *)
xxx_recvoob(struct socket *, struct mbuf *, int)
- always KASSERT(solocked(so)) even if request is not implemented
- replace calls to pr_generic() with req = PRU_{SEND,RCV}OOB with
calls to pr_{send,recv}oob() respectively.
there is still some tweaking of m_freem(m) and m_freem(control) to come
for consistency. not performed with this commit for clarity.
reviewed by rmind
into a separate function xxx_accept(struct socket *, struct mbuf *)
note: future cleanup will take place to remove struct mbuf parameter
type and replace it with a more appropriate type.
patch reviewed by rmind
usrreq switches and put into separate functions
xxx_{peer,sock}addr(struct socket *, struct mbuf *).
- KASSERT(solocked(so)) always in new functions even if request
is not implemented
- KASSERT(pcb != NULL) and KASSERT(nam) if the request is
implemented and not for tcp.
* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into
easier to cut & paste functions tcp_debug_capture() and
tcp_debug_trace()
- functions provided by rmind
- remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a
future commit.
* rename netbt functions to permit consistency of pru function names
(as has been done with other requests already split out).
- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb()
- rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb()
- sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()
* split/refactor do_sys_getsockname(lwp, fd, which, nam) into
two functions do_sys_get{peer,sock}name(fd, nam).
- move PRU_PEERADDR handling into do_sys_getpeername() from
do_sys_getsockname()
- have svr4_stream directly call do_sys_get{sock,peer}name()
respectively instead of providing `which' & fix a DPRINTF string
that incorrectly wrote "getpeername" when it meant "getsockname"
- fix sys_getpeername() and sys_getsockname() to call
do_sys_get{sock,peer}name() without `which' and `lwp' & adjust
comments
- bump kernel version for removal of lwp & which parameters from
do_sys_getsockname()
note: future cleanup to remove struct mbuf * abuse in
xxx_{peer,sock}name()
still to come, not done in this commit since it is easier to do post
split.
patch reviewed by rmind
welcome to 6.99.47
were not filling in struct stat.
decision made after further discussion with rmind and investigation of
how other operating systems behave. soo_stat() is doing just enough to
be able to call what gets returned valid and thus justifys a return of
success.
additional review will be done to determine of the pr_stat functions
that were already returning EOPNOTSUPP can be considered successful with
what soo_stat() is doing.
not fill in struct stat instead of returning success.
* in pr_stat remove all checks for non-NULL so->so_pcb except where the
pcb is actually used (i.e. cases where we don't return EOPNOTSUPP).
proposed on tech-net@
separate xxx_stat(struct socket *, struct stat *) functions.
* replace calls using pr_generic with req == PRU_SENSE with pr_stat().
further change will follow that cleans up the pattern used to extract the
pcb and test for its presence.
reviewed by rmind
abuse of pointer to struct mbuf type.
param2 changed to u_long type and uses parameter name 'cmd' (ioctl command)
param3 changed to void * type and uses parameter name 'data'
param4 changed to struct ifnet * and uses parameter name 'ifp'
param5 has been removed (formerly struct lwp *) and uses of 'l' have been
replaced with curlwp from curproc(9).
callers have had (now unnecessary) casts to struct mbuf * removed, called
code has had (now unnecessary) casts to u_long, void * and struct ifnet *
respectively removed.
reviewed by rmind@
into separate xxx_ioctl() functions.
* place KASSERT(req != PRU_CONTROL) inside xxx_userreq() as it is now
inappropriate for req = PRU_CONTROL in xxx_userreq().
* replace calls to pr_generic() with req = PRU_CONTROL with pr_ioctl().
* remove & fixup references to PRU_CONTROL xxx_userreq() function comments.
* fix various comments references for xxx_userreq() that mentioned
PRU_CONTROL as xxx_userreq() no longer handles the request.
a further change will follow to fix parameter and naming inconsistencies
retained from original code.
Reviewed by rmind@
maxv