9a8b75daeb
add BeOS entry, from URA Hiroshi, PR 6974
1999-02-09 19:11:46 +00:00
f0a4bb6818
Use the drive parameter from the partition table
...
to support booting from the second disk.
1999-02-08 21:52:43 +00:00
faf59c0aba
Initialize drive number in DL (not done by some BIOSs).
...
If you want to use 32-bit addresses, be sure to init the high bits, too.
Some additional register saves around BIOS calls (just in case).
1999-01-28 14:14:04 +00:00
3a6110fd02
Use <sys/disklabel_mbr.h>.
1999-01-27 21:41:31 +00:00
9fe4d42638
Set otherwise-unused global variable `disksectors' to disklabel.d_secperunit.
...
Change fdisk -S to emit disksectors as DLSIZE (for benefit of sysinst.)
1998-11-08 00:29:08 +00:00
1cd9ec3c71
Separate master bootcode from fdisk.
1998-10-15 15:23:23 +00:00
3cdac6d69c
Separate master bootcode from fdisk.
...
Add int13 extension support to master bootcode.
1998-10-15 15:22:13 +00:00
ba2f852285
Completely zero out a partition table entry,
...
if type, start and size are given as zero.
1998-10-02 17:23:22 +00:00
d8881a6f9a
Automagically initialize boot code and partition table if not yet valid.
...
Don't touch the partition table on -i, if previously valid.
1998-09-28 15:44:18 +00:00
db826b28d9
Dont report more than 1023 cylinders for DOS/BIOS because
...
the code below will truncate to a 10 bit field. This
can cause major problems later for DOS.
1998-08-10 18:46:29 +00:00
c0f9ff25e7
Use the new NetBSD partition ID for first time setup of an MBR.
1998-02-25 14:19:12 +00:00
707f944948
update for new partition ID
1998-02-19 15:15:29 +00:00
43e4e2726a
Add new NetBSD partition ID.
...
Update information about partition types - add missing types, insert
"reserved" for IDs which are marked as "officially reserved" in other
lists.
Sources of information:
-"How it Works -- Partition Tables" by Hale Landis <hlandis@ibm.net>
-Ralph Brown's interrupt list
1998-02-19 14:47:43 +00:00
70698891e2
When estimating the number of cylinders in the BIOS geometry, use the
...
total number of sectors as reported by disklabel.d_secperunit rather
than multiplying out the disklabel geometry, which is less accurate.
1998-02-07 16:19:16 +00:00
34a98169f0
macroize BSD, NetBSD, FreeBSD and misc cleanup
1998-02-06 05:54:12 +00:00
b545bd186c
Don't print "DOS partition initialized" if -S set; from Nathan
...
Williams in PR bin/4893.
1998-02-02 06:39:41 +00:00
24ec6663fe
Add missing cast. This is a minimum fix to avoid overflow which causes
...
core dumps with some disk geometry.
1997-12-22 01:54:07 +00:00
2ac0cdeda9
Typos, English.
1997-11-26 04:26:27 +00:00
a8d52993f0
Backout the prototype of opendisk().
1997-09-30 17:29:40 +00:00
c342d989c5
Prototype opendisk().
1997-09-30 17:09:13 +00:00
216ef04613
switch to using opendisk(3) from libutil
1997-09-25 05:08:28 +00:00
2ddc10a0ab
define WARNS?=1 for all of sbin/*
1997-09-15 12:45:47 +00:00
700617acfc
correct use of various mdoc macros to cleanup resultant man page
1997-09-14 14:05:34 +00:00
6e61b15d9c
* support ``short'' names of disks (e.g, ``sd0'') instead of requiring
...
the full name (e.g, ``/dev/rsd0d'') a la disklabel(8) (where the code
was effectively lifted from ;-)
* prefix hexadecimal numbers in output with '0x'
1997-09-14 13:52:26 +00:00
5388cd2717
Don't print some things if -f flag given.
1997-09-11 22:53:00 +00:00
2d074efe44
-- add -b flag for setting fdisk's idea of BIOS geometry from command line
...
-- cleanup so WARNS=1 works
-- man page updated to reality.
1997-09-05 21:26:57 +00:00
1b063875bf
Upgrade for non-interactive use. Interactive use is nearly unchanged.
...
-i no longer implies -u, -i now does not use the entire first track
because some BIOSes refuse to boot from a partition in the first track.
-s renamed to -S, new -s for non-interactive setting of a partition's
id, offset and size. Updated documentation to match.
1997-08-11 23:31:41 +00:00
1145b74178
Add code for a -s flag where the output is a series of VAL=xyz lines
...
so /bin/sh can "eval `fdisk -s`" and get variables defined with the
fdisk information.
1997-07-29 08:31:31 +00:00
c94b6b4f09
Add a whole lot of MBR partition types, derived from a couple of sources
...
including Linux.
Is there a master list of this somewhere?
1997-06-24 06:38:50 +00:00
5667e094a1
move man pages into share/man.
1997-06-23 04:23:46 +00:00
98de682c7c
Make this work on big-endian systems, such as the PowerPC. From
...
Wolfgang Solfrank <ws@tools.de>
1997-03-29 20:46:17 +00:00
9b746f76a4
Add code to look at the existing partition entries to deduce the
...
translated geometry of the disk. This code will only change the
disk geometry if it can find a geometry which is consistent with
all partition entries, so it's very conservative about choosing
a new disk geometry. Under some circumstances, it will choose a
number of cylinders which is a little lower than it needs to be,
but this code is enough so that you can create new partitions
with the correct physical addresses.
The right solution to this problem is to have the boot loader
communicate the BIOS geometry of each disk to the kernel, in a
manner similar to the symbol table, and then provide a kernel
interface to get at that information. I'm unfortunately not
really qualified to make such a change, and I want something
that works better than the status quo.
1995-10-04 23:11:19 +00:00
0114e805ce
convert to new RCS Id conventions; reduce my headache
1995-03-18 14:54:19 +00:00
e631f9d003
Recognize Linux file systems correctly.
1995-01-13 10:42:02 +00:00
06e2955ff1
specify man pages the new way.
1994-12-22 10:44:04 +00:00
5eeab43e28
more cleanups from Jim Jegers, passed over by me.
1994-12-05 20:15:31 +00:00
4b83d937e9
Allow `partitioning' of a regaular file.
1994-10-20 00:06:17 +00:00
4922d725cf
Remove some more uses of obsolete functions.
1994-09-23 23:48:10 +00:00
d9ad777ece
Clean up a bit more.
1994-09-23 05:30:09 +00:00
73984e0809
Clean this up a bit.
1994-09-23 04:30:13 +00:00
3be79230a5
More spelling errors.
1994-01-28 20:07:07 +00:00
ab3a89f913
Fix spelling errors
1994-01-14 02:05:23 +00:00
04f80fa1bc
386bsd -> NetBSD
1993-12-06 09:32:27 +00:00
aee4b07b8a
Add RCS identifiers, remove some completely useless RCS logs and patchkit
...
headers, and a few other insignificant changes.
1993-08-02 17:48:44 +00:00
cda4f8f6ee
Add RCS identifiers.
1993-08-01 05:37:30 +00:00
3a05a908df
added a 386bsd fdisk program, by julian elischer. (patch 111)
1993-04-09 19:23:56 +00:00
perry