agc
aad01611e7
Move UCB-licensed code from 4-clause to 3-clause licence.
...
Patches provided by Joel Baker in PR 22364, verified by myself.
2003-08-07 16:26:28 +00:00
pk
8f4478d022
lance_init(): explicitly clearing the `initialisation done' bit in the
...
status register triggers an interrupt which we don't handle. Since the
driver doesn't depend on this status bit anywhere else, just leave it alone.
2003-01-31 17:40:05 +00:00
itojun
c0a8cbae7c
drop garbage packet (due to chip bug) before injecting it to bpf.
...
make sure to behave as IFF_SIMPLEX, some lance chips does not behave as
IFF_SIMPLEX (e.g. vmware in outgoing multicast case).
http://mail-index.netbsd.org/tech-net/2001/05/16/0001.html
2002-09-03 14:48:16 +00:00
lukem
a4bae8b066
add/cleanup RCSID
2001-11-13 13:14:31 +00:00
thorpej
0884f20bf7
bzero -> memset
2001-07-07 16:13:44 +00:00
thorpej
150ca9d41a
bcopy -> memcpy, strcpy
2001-07-07 15:59:37 +00:00
thorpej
c2c26e1362
bcmp -> memcmp
2001-07-07 05:35:39 +00:00
jdolecek
a7d6a8f2f1
The ifa is needed for CCITT&&LLC case, provide it in that case
2001-06-19 07:19:35 +00:00
onoe
319ea4a342
make it compilable: delete unused variable 'ifa' from lance_ioctl()
2001-06-18 13:47:18 +00:00
jdolecek
e65b619faa
Convert to use ether_ioctl() for SIOCSIFADDR and SIOCSIFFLAGS.
2001-06-18 11:06:26 +00:00
mrg
c13e3a6693
use _KERNEL_OPT
2001-05-30 11:40:35 +00:00
jdolecek
6589e65051
Don't panic if the memory size is "weird", but instead compute
...
reasonable transmit/receive buffer count.
This is needed for e.g. SKNET adapters, which use top 30 bytes of 16KB
memory to map registers and PROM and hence not all the memory is
available for buffers.
2001-04-27 17:08:02 +00:00
thorpej
6b16911a43
ALTQ'ify.
2000-12-14 06:27:23 +00:00
thorpej
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
tsutsui
39355e9743
Make this compilie with LANCE_REVC_BUG.
2000-11-03 06:21:32 +00:00
bouyer
e999ecae48
Support ETHERCAP_VLAN_MTU. Tested on a sparc 2 with:
...
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 00:00:3b:86:19:92
le0: 8 receive buffers, 2 transmit buffers
2000-10-20 09:40:26 +00:00
thorpej
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
thorpej
6e4b4f6954
Use ether_crc32_le().
2000-05-12 16:45:42 +00:00
augustss
169ac5b3c1
Remove register declarations.
2000-03-30 12:41:09 +00:00
simonb
fca16d1571
Move the "Attach the interface" section after printing the mac address
...
and buffer sizes. Stops the ipv6 attach info from messing up the
other driver info.
1999-11-17 03:42:24 +00:00
thorpej
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
thorpej
1a1efc6b68
In lance_mediachange(), if there is no callback to the front-end, just
...
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is setting
to that type.
In other words, don't require the front-end to provide the no-op.
1999-04-30 18:15:04 +00:00
explorer
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
thorpej
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
mycroft
95aa0d0b7d
Simplify the copy loops a bit.
1998-12-12 16:58:10 +00:00
leo
5335909035
BVME410 ethernet driver by 'maximum entropy'.
1998-12-09 07:33:59 +00:00
mycroft
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
mycroft
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
drochner
9a59784f70
Split the LANCE driver into a part specific to the classic chip with
...
24-bit DMA addresses, and an independant part.
Implement support for the 32-bit mode in the newer (79c9xx) chips.
1998-07-21 17:26:45 +00:00
