cpu_idle() and new cpu_switch() to replace the old cpu_switch()
which did the lot. Runs leaner without overly blocking interrupts.
Includes cleanup of the RAS code to make use of callee-saved registers.
Benchmarks on DX4 @ 100MHz reveal a slight performance improvement
but probably not statistically signficant. More TBD to verify this.
Changes passed a pounding on Athlon @ 1GHz too.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
If a segment starts exactly at 16M don't try to split it because that causes
the code to try to call uvm_page_physload with a zero length segment.
(kern/17199)
bits of the K6 cache-control-register: disable the cache; flush the cache;
set the bits; re-enable the cache (all much like programming the pentium
mtrr's). See reference posted to tech-kern; also review there by thorpej.
via the Configuration Port, so restructure the code a little
to allow for them, and list at least one other system that does
(anything based on AMD Elan SC520).
XXX We don't actually check for Elan SC520 yet.
driver attaches where "pchb" would normally attach (it matches at a
higher match priority). The "elansc" driver currently provides support
for the watchdog timer built-in the SC520.
Thanks to Jasper Wallace for laying the ground-work for this (most
notably by providing a work-around for a watchdog-related bug in the
SC520).
without external antenna...
cbb0: interruptingaat irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
wi0 at pcmcia0 function 0: Dell, TrueMobile 1150 Series PC Card, Version 01.01
wi0: 802.11 address 00:02:2d:6c:db:f6
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: supported rates: 1Mbps, 2Mbps, 5.5Mbps, 11Mbps
