Commit Graph

20 Commits

Author SHA1 Message Date
soren
875bff0962 To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.
2001-12-15 13:23:20 +00:00
lukem
ab5d9d2b0c add RCSIDs 2001-11-13 07:24:43 +00:00
thorpej
3ae6eaea7f bcopy -> memcpy, strcpy 2001-07-07 16:49:57 +00:00
thorpej
6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
thorpej
b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
itojun
d01f7f6e2b correct memory size to be mapped. PR 11242. 2000-10-16 10:26:41 +00:00
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
itojun
e93c7e8dd2 typo. From: jdolecek 2000-07-05 18:47:51 +00:00
itojun
5f1c4bb519 use memory mapped address, instead of i/o memory access, for control
registers.  rationale:
- Netwave cards choke if we map i/o memory to >= 0x400
- even though, CIS tuple talks nothing about it
- it is not possible to specify range in pcmcia_io_map
- it would be very bad to do a try-and-error bus_space allocation for
  i/o memory regions < 0x400
- we can have exactly the same functionality with memory mapped access
this should correct PR 10139.

the memory mapped access idea was from WIDE wildboar/bsdi cnw code.
2000-07-05 18:42:19 +00:00
gmcgarry
63ce2b1954 Clean up usage of XIRCOM/TDK identifiers. 2000-06-05 23:06:31 +00:00
augustss
169ac5b3c1 Remove register declarations. 2000-03-30 12:41:09 +00:00
thorpej
91c44a72b8 Set ifp->if_baudrate as appropriate. 2000-03-06 21:02:37 +00:00
itojun
beecfd4814 cnw is 8bit-only card. map memory region as 8bit only.
(there are so many 8bit-only card fixes.  don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
augustss
a534cd4254 Correct John Markus Bjørndalen's horribly mangled name in a comment. 2000-02-07 09:40:37 +00:00
itojun
7aa608e563 handle attach failure in more detail. make sure to
pcmcia_function_disable() on failure.
2000-02-02 13:02:56 +00:00
itojun
4e1b4b724b implement cnw_detach.
XXX it looks that whenever there's error-return in xx_attach,
we need to have some check in xx_detach().  otherwise, routines such as
ether_ifdetach() will be called without call to ether_ifattach().
2000-02-02 12:25:13 +00:00
itojun
9d17b2ca6a bring in stabilization codes in freebsd PAO/bsdi cnw driver.
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
  not enabled by default - try it if you see performance problem on
  heavy traffic)
2000-01-25 16:48:47 +00:00
itojun
1b6504a175 improve cnw driver, looking at bsdi/freebsd-pao cnw driver by wide+prb@bsdi.
- implement ioctls compatible with bsdi/freebsd-pao.  stat type is
  changed from u_int to u_quad_t to avoid overflows.  now it is possible
  to switch domain/encryption key from the userland, using cnwctl(8).
- implement multicast/promiscuous mode.  tested with IPv6.
1999-11-29 12:53:59 +00:00
thorpej
f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
christos
512db6124c Add Xircom Netwave driver from Michael Eriksson 1999-01-01 19:30:03 +00:00