1156c833f6
Remove all the "#ifdef __APPLE__" code, to make this actually
...
build again on Darwin. The code in question is outdated.
OK'd by Wilfredo Sanchez wsanchez@MIT.EDU .
2001-02-20 19:45:51 +00:00
7478bd5e34
convert parameters to host byte order before printing them
2001-02-20 19:18:32 +00:00
25bdbb661e
convert to use getprogname()
2001-02-19 23:22:40 +00:00
8eaad363dc
s/preffered/preferred/ in message.
2001-02-19 09:53:50 +00:00
3a7ec5d5cd
Define both NLIST_ELF32 and NLIST_AOUT on m68k.
2001-02-18 05:58:35 +00:00
d47ff437ed
Make both ARM ports support both NLIST_AOUT and NLIST_ELF32.
2001-02-17 21:18:40 +00:00
62589880a5
No need to invoke extra shell.
2001-02-16 01:05:32 +00:00
5d315aaaf9
Run make in compat mode while evaluating rhs of != op.
2001-02-16 01:01:39 +00:00
20540573e7
pull latest faithd from kame. /etc/faithd.conf allows you to filter by prefix.
...
manpage cleanups.
2001-02-15 17:58:55 +00:00
785b754775
Use separate printf()s instead of using a saved format string. Fixes
...
compiles with "FORMAT_AUDIT=yes WFORMAT=2".
2001-02-15 02:32:26 +00:00
32f6d71ea4
Remove a duplicated "md->name" in a warnx call.
...
Noticed by Tyrel Beede on current-users.
2001-02-15 01:59:54 +00:00
e379b8ae5f
groupmod: ensure that the modified group has the trailing newline
2001-02-13 21:27:03 +00:00
03d6b1489a
update make infrastructure and shlib versions numbers for heimdal 0.3e
2001-02-11 18:02:04 +00:00
9e66537acb
use version identification same as ISC's.
2001-02-11 06:45:59 +00:00
d80b31fd76
Don't rely on the struct e_vnode since it isn't a part of KERN_VNODE sysctl
...
interface and it actually breaks pstat -v on an architecture on which
compiler emits padding between the struct's members.
2001-02-11 03:01:05 +00:00
693aff020e
Protect statement macro with do { ... } while(0).
2001-02-11 02:44:27 +00:00
c1c612f728
link named-xfer statically, to make building chroot-ed named cages much easier
2001-02-11 01:33:59 +00:00
1cfd16779b
Pull in decl. of memset() so that this can be compiled on alpha.
2001-02-09 01:31:52 +00:00
5cb09b1c66
sync with latest kame tree. ndp -n -a is prettier with longer addresses.
...
-l is obsolete (igored).
2001-02-08 07:37:18 +00:00
aaa8b0ecdc
only link against -lkadm5srv
2001-02-07 14:07:47 +00:00
0a7bed1113
bring in latest kame code.
...
- correct RTA_NETMASK processing
- correct -A filter behavior (do not advert aggregated route to other if)
- better signal handling
- mandate getifaddrs
- do not advert connected routes on !IFF_UP routes. experimental
sync with kame
2001-02-07 13:46:04 +00:00
39ca30e495
setindex2ifc(): after a realloc(), zero the newly acquired entries.
2001-02-07 13:24:42 +00:00
31a9ada156
link against -lkadm5clnt instead of -lkadm5srv (this makes the `get'
...
command actually do something on non-kdc machines)
2001-02-07 10:38:02 +00:00
77c450a230
Squash some nits.
2001-02-06 12:53:48 +00:00
56f2ea71f0
typo. ntohl -> htonl.
2001-02-05 06:04:41 +00:00
9b7718e15b
set *errmsg to errbuf, preventing coredump if no interfaces are up
2001-02-05 02:37:34 +00:00
ea0d957018
Add a control utility for `mlx' devices. Derived from FreeBSD's `mlxcontrol'.
2001-02-04 17:30:35 +00:00
f0c3971950
use -msoft-quad-float on the sparc64.
2001-02-04 14:42:31 +00:00
f42a521bf9
Class names can be specified in list mode.
...
Code contributed by Tetsuya Isaki <ti@hiroshima-u.ac.jp>.
2001-02-04 08:37:33 +00:00
0393c88566
avoid infinite loop when -s is specified (select loop mistake).
...
make agetent() 32bit clean. KAME PR 127.
disable -R (router renumbering receiver). sync with kame.
2001-02-04 06:19:40 +00:00
bcbf09100a
listen to the port number specified on argument, as advertised
...
in document. part of PR 12112 from feico@pasta.cs.uit.no .
2001-02-02 14:20:33 +00:00
1a23840177
Make this look ok when formatted.
...
Fixes PR 12078 by Nigel Reed <nigel@nelgin.nu>
2001-02-02 03:33:50 +00:00
25a0bdc99a
Fix handling of the backspace and delete keys when editing a field.
2001-02-01 08:43:46 +00:00
aa592358be
Add a popup message telling users how to use the multiple selection and
...
list field types, so users aren't mystified when they encounter one.
2001-02-01 08:29:46 +00:00
c87a3782c4
Add .Dd (date).
2001-02-01 00:51:58 +00:00
8ecdc3e510
Correct the `usage' message.
...
Pointed out by Tetsuya Isaki <isaki@se.hiroshima-u.ac.jp>.
2001-02-01 00:51:22 +00:00
305f1af6ff
Major cleanup:
...
Add new form keyword, iscript, which allows script generated integer fields.
This uncovered a whole host of bugs, which uncovered a whole host of memory
leaks, which hopefully I've fixed most of now (in this file at least).
2001-01-31 09:35:42 +00:00
a9e45dc961
Put both .S and .s files in SFILES. Fixes bin/12051. Patch from Richard
...
Earnshaw via Chris Gilbert.
The right solution here is to have every port use .S, but that might take a
while...
2001-01-31 00:15:40 +00:00
5ec07d55ff
Hmm...My last change was a bit too drastic. Sun3's would never run the inner
...
bit of checksum code. Restructure #ifdef's. Really, use_openprom should just
be visible on all ports and set to 0 on sun3 or something.
2001-01-29 03:11:50 +00:00
f8c082d5a5
Cleanup last set of cleanups so this compiles on systems without
...
openprom (ala sun3).
2001-01-28 22:22:25 +00:00
ca89dc0998
minimize diffs to tcpdump.org tree, even if cosmetic.
...
changes include:
- do not chase header if ip/ip6 datagram is framgented, and it is not the
first fragment
- u_short -> u_int16_t
- buffer boundary checks, including sprintf -> snprintf
- cleanup truncated packet cases
- pull tcpdump.org enhancements/corrections for RIP, IPv6 options, ICMPv6,
OSPFv3, IPv4 options, BGP
there are a lot of local/conflicting changes. we'd gradually decrease
# of diffs by synchronizing both ends, and then move to src/dist/tcpdump
and reachover makefile.
2001-01-28 10:05:05 +00:00
3915684b18
remove extra space after typename. sync with tcpdump.org
2001-01-28 07:56:56 +00:00
b3d0e180ed
print A6, DNAME and bit string label correctly.
...
sync with tcpdump.org.
2001-01-28 07:51:33 +00:00
64a4efdbfa
for sha.o target, use decl very similar to bsd.lib.mk
2001-01-28 01:43:26 +00:00
3966d2696b
Disable optimization when compiling sha.c.
...
This is a know bug (see our libc sha1 implementation and the associated
doc/hacks entry) with the toolchain used on sparc64 currently.
XXX - somebody please check/fix OBJDIR handling for this
XXX - somebody please fix the ****** toolchain
2001-01-28 00:42:20 +00:00
cd938b3400
enable DNSSEC code (using -DDNSSAFE) if MKCRYPTO=yes
2001-01-27 08:14:43 +00:00
ad5df36306
update $VER
2001-01-27 07:35:32 +00:00
1a7fc7b687
upgrade to BIND 8.2.3. the upgrade is critical (security fixes).
...
please test.
2001-01-27 07:21:56 +00:00
6c1d54c4cb
* Make error messages from open(2) include the file/device that was
...
not open-able
* Add -v switch to dump some font-stats before loading them.
2001-01-26 20:25:25 +00:00
c5d65e2d74
Improve grammar slightly in the description for IPsec policy settings.
2001-01-25 21:49:31 +00:00
739ac42b5e
be more picky about running /etc/apm/{battery,line} in response
...
to APM_POWER_CHANGE event. some BIOS post this event periodically
while the battery is charging/discharging (no change in a/c state).
on these systems this prevents /etc/apm/{battery,line} from being
run multiple times.
2001-01-25 00:48:59 +00:00
18d0882a77
Add a function to fetch a list of different package categories that are
...
available to the user to install binary packages with.
Modify the function API so it can handle preforms like it is supposed to.
2001-01-24 09:30:30 +00:00
1dc7842166
Deal with null returns from script entry field types in a semi-sane manner
2001-01-24 08:29:56 +00:00
18e0c94727
Fix an off-by one error in run.c having to do with the down arrow, and fix
...
some minor display glitches in the form routines.
2001-01-24 07:46:23 +00:00
69f61c7f62
Fix the editing popup window so it's actually readable.
2001-01-24 07:23:51 +00:00
fdb7bdb2c0
Fix some bugs pointed out by Brett Lymn where I wasn't checking the return
...
value of field_buffer.
2001-01-24 07:17:10 +00:00
2355131777
make sure to initialize prefix information struct before use. sync with kame
2001-01-23 15:35:54 +00:00
083ffe26fe
This should fix PR 11865 by Petri Koistinen: modelines too short by more
...
than one entry would only be detected by a (core dumping) strtol().
2001-01-22 21:11:23 +00:00
73ffa92b18
Fix one of the bugs in the TODO list, sushi would die with a bad endpoint
...
if you hit enter on one of the blank lines in the main menu.
2001-01-22 07:12:49 +00:00
69622e75ab
sync with latest kame.
...
- make icmp6.h spec conformant to 2292bis-02, regarding to router reumbering
flag bit.
- latest rtadvd.
2001-01-21 15:39:32 +00:00
14296ba1e6
make it clearer that /etc/rtadvd.conf is optional (normally,
...
configurations were derived from kernel interface settings).
install rtadvd.conf into /usr/share/exapmles/rtadvd, instead of /etc.
sync with kame.
2001-01-21 15:01:36 +00:00
45c9804017
avoid memory leak. sync with kame
2001-01-21 07:51:17 +00:00
f46c3b8662
Teach tcpdump(8) to dump VRRP.
2001-01-19 09:10:13 +00:00
b0ee440a2f
Update the TODO list a little bit. Add a few items that were brought to
...
my attention.
2001-01-19 07:50:20 +00:00
f93a8a97b8
Parse nfs file handle better on NetBSD. On little endian machine,
...
it was completely broken. On big endian machine, it was detected as SUNOS4
and thus 32bit dev_t isn't handled properly.
XXX: The auto detect code should be integrated more cleverly if possible.
XXX: In addition, it is better if there is a way to specify server os type.
2001-01-19 01:28:50 +00:00
3b32ee2ae2
this is ntpq(8) not pq(8). (conversion problem from the html???)
2001-01-19 01:25:32 +00:00
ed7ec7c142
Make this work again for the case where there are devices
...
configured, but none of those devices happen to have locators.
2001-01-18 07:09:47 +00:00
5087e52718
Kill .NOPATH, and fix some DPADDs.
2001-01-18 03:28:19 +00:00
acef071496
Fix the sorting introduced in rev 1.9 for the netgroup map:
...
handle entries that span multiple lines correctly.
2001-01-16 07:15:18 +00:00
d594ce939b
comment or delete text after CPP directives.
2001-01-16 02:50:27 +00:00
bcc8ec9959
include stdlib.h for prototypes (typically for exit()).
2001-01-16 02:44:43 +00:00
fdfcf1962d
labels (even default:) _must_ be followed by statements! usr.bin/fgen/fgen.l
2001-01-16 02:43:37 +00:00
c338834cd9
use expr to do subtraction. shell math isn't as portable.
2001-01-16 02:42:39 +00:00
9cfe468c74
avoid C sequence point issues warned about by development version of gcc.
2001-01-16 02:41:17 +00:00
e209ced86f
include string.h for prototypes.
2001-01-16 02:38:36 +00:00
3e8fb298b1
Avoid accidental use of trigraphs. Pointed out by development version of gcc.
2001-01-16 02:37:03 +00:00
ede451d831
comment about the backslash used to avoid trigraph
2001-01-16 02:36:29 +00:00
4edf8bff8e
Don't forget the trailing newline.
2001-01-16 02:34:34 +00:00
f762cf8294
for linking, libraries should be named _after_ the libraries that need them.
...
In this case, curses should come after cdk & form.
2001-01-16 02:34:14 +00:00
7d77421729
Comparing ch != -1 when ch is of type char is no good idea.
...
Fix this for ports where char is unsigned by making ch an int.
Pointed out by Matthias Pfaller.
2001-01-15 09:26:15 +00:00
a88307ab86
sync with latest kame tree.
...
- reduce chances for signal handler rae condition
- decrease chances for misconfiguration
- feedbacks from router renumbering protocol bakeoff
2001-01-15 06:14:05 +00:00
3c1becf72b
Fix a buffer overrun in the parsing of the searchpaths, and check the return
...
values of some curses functions I overlooked.
Pointed out by Brett Lymn in private email.
2001-01-14 21:23:23 +00:00
d4f4672be8
move target definition after including bsd.prog.mk so that target protection
...
works.
2001-01-14 10:36:11 +00:00
b4d783f6b6
move target after including bsd.prog.mk so that target protection works.
2001-01-14 10:34:57 +00:00
b420e5eb3e
don't include bsd.nls.mk; bsd.prog.mk does it for us.
2001-01-14 06:26:56 +00:00
48110adac6
correct fd_set allocation. from deraadt
2001-01-12 18:53:20 +00:00
606c47534d
make signo a volatile variable. sync with kame
2001-01-12 17:48:37 +00:00
5e43f4d020
make signal handler very short, to avoid possibility of race conditions.
...
commented by deraadt. sync with kame
2001-01-12 14:55:13 +00:00
e3e65b0f8d
When building gethnamaddr.o and getnetnamadr.o from libc sources,
...
define _LIBC so that the weak aliases those files normally define if
built in libc get set properly. Otherwise, this doesn't link statically.
Static linking tested on NetBSD/i386 by sommerfeld, correct runtime
operation not verified (but should be no different than before).
2001-01-12 01:43:48 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
30fc09dacc
Use PRINTOBJDIR.
2001-01-11 13:15:06 +00:00
5e2a856773
Kill no longer used variable decl.
2001-01-11 13:06:28 +00:00
e4099568d7
minor knf
2001-01-11 07:58:04 +00:00
06680ddb2d
fix tyop
2001-01-11 03:28:03 +00:00
30724dba3e
LOG_ODELAY is deprecated; it's the default
2001-01-11 03:05:42 +00:00
cb4cea7120
don't use LOG_CONS
2001-01-11 02:44:03 +00:00
631bc8fbd3
oops, forgot syslog.h
2001-01-11 01:54:08 +00:00
27f625d619
use LOG_WARNING for warnings and LOG_ERR for fatal errors
2001-01-11 01:47:55 +00:00
f0ccfb9aa0
skip past / if we found one in argv[0]
2001-01-11 01:45:07 +00:00
13220245b2
use explicit name rather than __progname in openlog
2001-01-11 01:43:25 +00:00
7890e93e47
remove unnecessary ":" in openlog ident
2001-01-11 01:43:10 +00:00
39c3c68f55
when calling openlog():
...
- don't use LOG_CONS
- use explicit name rather than __progname
2001-01-11 01:42:50 +00:00
0645f2f67b
use explicit name rather than __progname in openlog
2001-01-11 01:34:28 +00:00
a78cb15fc9
use "ypxfr" instead of __progname as ident arg to openlog
...
wrap all debug syslogs in #ifdef DEBUG (rather than just most of them)
2001-01-11 00:35:49 +00:00
48565a8e05
use "ypserv" instead of __progname as ident arg to openlog
2001-01-11 00:34:51 +00:00
74590d002a
add openlog(...,pid, daemon)
2001-01-11 00:16:11 +00:00
43b126d3f1
no need for LOG_PERROR if we're about to daemon()ize (and close
...
stderr in the process)
2001-01-10 23:48:14 +00:00
c7121de1da
use getcwd() instead of getwd() - mainly to avoid link warning, this
...
particular usage is safe
2001-01-10 22:53:22 +00:00
e153fd2620
CPPFLAGS is for CPP flags, not COPTS.
2001-01-10 18:11:05 +00:00
b4aac50fda
Changes to sushi to allow users to bind different keys to the various
...
built-in functions. This allows users to change F1 to say, ^X, in the case
where a function key might not be available, or perhaps is bound to a window
manager.
problem noted by Nathan Williams
2001-01-10 10:00:29 +00:00
ca4a8d27dc
Move routines which fill in tbuf in addrmerge(). The fixes in 1.4 pick a new
...
interface but don't fill in tbuf which results in clients getting garbage back
in part of the answer. This makes sure there's something in tbuf.
At some point this whole logic should be looked at, as just picking a random
local up interface for non-local requests doesn't feel right.
2001-01-10 05:23:43 +00:00
ee3a00e29e
de-lint
2001-01-10 03:05:48 +00:00
259b42afe7
Some cleanups in how help is handled. Now print a dialog box saying that
...
help could not be found when no help files are available. When the help
window dissapears, redraw the screen so the menu isn't invisible.
2001-01-09 21:38:53 +00:00
009ea1962a
Fix a segfault when the user hits ESC inside the F4 selection box for a
...
list field.
2001-01-09 19:32:35 +00:00
f6177aaaba
When dropping out to a shell for the user via F9, use $SHELL if it's
...
available, rather than hardcoding /bin/sh. Problem noted by itojun on
tech-userlevel
2001-01-09 19:01:57 +00:00
54f9960ad3
Update usage message.
2001-01-09 17:35:45 +00:00
d56c24a854
Make this compile again.
...
(Compile before commit...)
2001-01-09 17:08:47 +00:00
4ce5fb6f63
Handle finding help for F1 better in the toplevel menu.
...
TODO: print a dialog message if help cannot be found.
2001-01-09 09:41:41 +00:00
74db0945af
Backout the addition of timeout(). This did not have the desired effect
...
at all. problem noted by itojun on tech-userlevel.
2001-01-09 08:06:22 +00:00
443a19e035
convert to using .WAIT
2001-01-09 03:13:39 +00:00
a2633f6a37
Add better handling of a failure to find any menus at all for sushi to
...
process. Document the ability to use "quicknames" in the sushi manpage.
2001-01-08 21:19:31 +00:00
6931d9c234
do not decode non-first IPv6 fragment. sync with tcpdump.org code
2001-01-08 16:42:29 +00:00
ff9d32a832
Add a bug that I forgot about in here.. so that I don't forget to fix it.
2001-01-08 08:33:24 +00:00
5a95f8151c
Add the sushi manpage to the makefile.
2001-01-08 08:24:17 +00:00
729ebd2d8e
Write a manpage for sushi. Closes PR 11902 by Lennart Augustsson.
2001-01-08 08:12:54 +00:00
6f9aebaaf0
Cleanup startup error message handling, copy fatal messages to stderr
...
too when not (yet) running in background.
Avoid calling endwin() when curses has not been initialized. Fixes a core
dump reported by Bernd Ernesti when running full-screen mode with
configuration file errors.
2001-01-08 07:18:54 +00:00
a6df9f9ad3
Fix coyp&pasto bug when parsing the ppp-expect-password option, reported by
...
Thomas Moestl against the FreeBSD version.
2001-01-07 21:01:03 +00:00
d6af3290ae
Remove accidently imported generated y.tab.h file and make sure it's
...
removed by "make cleandir".
2001-01-07 09:03:21 +00:00
9093099039
Fix configuration of isp* (ISDN ppp) devices via isdnd.rc,
...
patch from Christoph Badura.
2001-01-07 09:00:49 +00:00
270db080e9
Use PRINTOBJDIR.
2001-01-07 08:00:54 +00:00
f4f6931307
Alphabetize options.
2001-01-07 01:39:20 +00:00
df22eba7da
len is size_t and not int.
...
Fixes compile problem on alpha.
2001-01-06 15:04:05 +00:00
4723e61556
rename sushi.msg.en to C.msg
...
build and install message catalog
2001-01-06 14:00:33 +00:00
bb3d9aa044
Enable ISDN userland utilities.
2001-01-06 13:03:49 +00:00
fbf08005d7
Import of essential ISDN4BSD userland utilities and their documentation.
...
The left out parts (which have not been installed by ISDN4BSD on NetBSD
anyway), may be added as pkgs later (if demand exists).
2001-01-06 13:00:10 +00:00
f5e6028400
Get rid of the TRY_AGAIN kludge. It is completely counter intuitive to have
...
every DNS lookup fail after the first TRY_AGAIN failure.
Also take care of minor lint stuff [extra h_errno declaratation/NULL vs. 0 etc]
2001-01-05 19:34:13 +00:00
33191e72a1
Use ${PRINTOBJDIR}.
2001-01-05 19:01:59 +00:00
8463038876
Fix some things that were missed when this program was renamed to
...
"sushi".
2001-01-05 18:57:25 +00:00
f1eeab30f5
Language police:
...
"It's" is short for "it is".
The possessive pronoun is "its".
2001-01-05 17:05:26 +00:00
c235d349be
Enable Sushi
2001-01-05 15:46:10 +00:00
c2aa46e7c2
use %ll_ instead of the less standard %q_
2001-01-05 03:27:26 +00:00
2537f730fa
always use %lld for INT64_FORMAT (rather than %ld on __alpha__ and __sparc_v9__
...
and %qd on everything else), and always cast the vars to (long long).
2001-01-05 03:21:53 +00:00
745fabb2ce
MACHINE_ARCH for MIPS machine is "mipsel" or "mipseb".
2001-01-05 01:35:45 +00:00
fbbe4d12db
Initial import of sushi.
...
Sushi is an interactive, menu-based program that is designed to aid
the user or administrator with administrative and complex tasks on thier
machines.
Sushi provides a menu of various functions that the user can perform on
his or her machine. Once the user selects a desired function, the
function is either performed outright, or in most cases, the user is
asked to fill in a simple form with required and option information,
which is then processed by sushi, and the action occurs.
The programming interface for sushi is very simple. There are
directories containing various files, such as menu indexes, or forms for
the user to fill out. These files are interpreted by sushi to generate
the menus the user sees on his/her screen. When the form is filled out
by the user, the entries are passed as command-line arguments to a
program, or script contained in one of the subdirectories. In this way,
it is possible to add new entries to the sushi menu structure, by simply
adding a new menu item, form and script, the binary does not need to be
recompiled to take advantage of this new menu.
2001-01-05 01:28:33 +00:00
4519a2cf89
libc has clnt_sperrno(), no need to pull it into libamu.
...
this also raises problem when we try to link amd statically. PR 11187.
bumps libamu major.
2001-01-04 14:21:09 +00:00
92ee339d1c
sh3 split
2001-01-04 09:43:05 +00:00
11a8150bad
unbroken it. dev/i2p/iopvar.h requires sys/device.h for sizeof(dv_xname).
...
not sure if it is the right fix or not.
2001-01-04 06:16:02 +00:00
06b30834dd
${PRINTOBJDIR}
2001-01-03 15:57:00 +00:00
9857da78ba
s/make/${MAKE}/
2001-01-03 08:43:05 +00:00
6e6337b43d
* findmatchingname():
...
When the bzip-pkg handling was introduced, a dewey pattern (foo>1) may get
a character-class-pattern attached (.t[bg]z), and the code was not prepared
to match that. I've special-cased handling of character-class pkg suffixes
for ".t[bg]z", and when scanning a dir in findmatchingname() now both the
'first' part of the pattern (e.g. "foo>1") and the suffix (e.g. ".t[bg]z")
must match the file, hence the two pmatch() calls.
* findbestmatchingname_fn():
Caught a case where ".t[bg]z" was not properly handled. Must do the same
suffix-processing again here!
Fixes PR 11856 by Dan McMahill <mcmahill@mit.edu>
2001-01-01 22:07:35 +00:00
8679c35174
More va_list vs. _BSD_VA_LIST_ lossage
2000-12-30 21:45:44 +00:00
8d2fdb358e
Don't duplicate system declarations (vsprintf and friends) already
...
present in system headers. Even worse: those declarations have slightly
different argument types (va_list vs. _BSD_VA_LIST_)
2000-12-30 21:36:23 +00:00
26ebe4297f
Add a flag to show the device driver(s) associated with each device.
2000-12-30 13:57:44 +00:00
7f426f36c1
ANSIfy.
2000-12-30 13:50:43 +00:00
4a49026fe0
move .PATH after bsd.prog.mk
2000-12-29 05:22:07 +00:00
3207cfe8dd
install sample configuration files into /usr/share/examples/racoon.
...
make variable "SBIN_RACOON" will build static racoon binary, and installs
it into /sbin (nonstandard)
2000-12-29 03:16:39 +00:00
31daf71078
visit usr.sbin/racoon in build process (if MKCRYPTO != no).
2000-12-29 02:41:55 +00:00
54e4101852
synchronize with latest tcpdump.org tree
2000-12-29 02:38:23 +00:00
66927d4789
move racoon build framework from sbin/racoon to usr.sbin/racoon.
2000-12-29 02:33:38 +00:00
7490542205
Document the name forms of the ICMP and TCP field offsets/values
...
recently added to libpcap's compiler.
2000-12-28 22:43:39 +00:00
1d1f43e05c
Improve handling of -l with -m, and update documentation.
...
Based on an idea by Alistair Crooks in bin/11707.
2000-12-23 17:19:48 +00:00
a73ca31ff8
Clarify what happens if -d is specified without -m.
...
Fixes second part of bin/11707.
2000-12-23 16:30:21 +00:00
39df6581fe
Fix moving a user's home directory with 'useradd -md /new/home/dir user'.
...
Clarify code (newpwp was referencing the same struct as pwp).
Fixes first part of bin/11707.
2000-12-23 16:29:35 +00:00
8537da23ad
use strlcpy/at throughout the code. more strct argument validation.
...
revoke setuid privilege earlier.
sync with kame.
2000-12-22 15:12:04 +00:00
8d81e0e116
__CONCAT does token pasting, not string concatnation. if something like:
...
__CONCAT("foo","bar");
actually works to concantate strings, it's because the preprocessor expands
it into "foo""bar" as separate strings, and then ANSI string concatenation
is performed on that. It's more straightforward to just use ANSI string
concatenation directly, and newer GCCs complain (rightly) about misuse
of token pasting.
2000-12-20 01:34:39 +00:00
94e108c80f
avoid accidental use of ANSI C trigraphs.
2000-12-20 01:30:26 +00:00
d87582beba
avoid use of ANSI C trigraph ??)
2000-12-20 01:29:21 +00:00
10fb60e4ee
do not declare errno on our own. from: Patrick Welche <prlw1@newn.cam.ac.uk>
...
sync with the latest kame tree.
2000-12-19 23:55:02 +00:00
95ecff2f0d
Pull in ${DESTDIR}/usr/include before ${DESTDIR}/usr/include/openssl, so
...
that we get the system's err.h, not openssl's.
2000-12-19 21:18:32 +00:00
ab70197801
Select the object format in the Makefile, to allow selecting on
...
%MACHINE when deciding what object formats to support.
2000-12-18 20:43:58 +00:00
ba39d0a858
Correct display of invalid username error and cache duplicate password
...
lookup (fixes PR#11695).
2000-12-17 22:47:14 +00:00
893fdc80cf
Descend into altq.
2000-12-17 03:06:53 +00:00
28f0042b51
Build glue for ALTQ programs.
2000-12-16 18:57:34 +00:00
d4bf5787dc
Token bucket regulator config program for altq.
2000-12-16 17:53:19 +00:00
8726857e6b
Import the altq status program.
2000-12-16 17:40:16 +00:00
09dce659bf
Import the altq configuration daemon.
2000-12-16 17:39:40 +00:00
95a6556014
Import the altq library.
2000-12-16 17:38:07 +00:00
1d0a6f62b8
revert 1.51 and 1.52 (_KERNEL_foo stuff), due to loud objections from
...
a couple of people. we'll just have to go back to adding this manually
to our config files...
2000-12-14 22:14:45 +00:00
eee03f150e
No need to initialise a global to zero.
2000-12-13 23:00:32 +00:00
ad2150de6f
Remove debug printf.
2000-12-13 12:34:02 +00:00
f0f66cd139
..., and fix new warning on i386.
2000-12-13 11:07:16 +00:00
e7d5c1b188
fix LP64 warning.
2000-12-13 10:56:43 +00:00
2285fa8eab
Print address of lower vnode of layered fs vnode.
2000-12-13 05:50:33 +00:00
7ec21d4438
Use va.va_type instead of va.va_mode to determine if a nfs vnode is a
...
deivce node or not, since latter contains permission bits only.
2000-12-13 05:34:55 +00:00
3d76df0ee0
Strip not only .tgz but also .tbz etc. (missed from last commit)
2000-12-13 03:49:56 +00:00
5382dffae7
* Accept ".tbz" as an alternative pkg suffix to ".tbz" for pkg_add and
...
pkg_info
* In pkg_create, compress with bzip2 if a .tbz suffix is given
* Fix pkg_info to work via ftp, either via URL specified on command line
or via one made up from PKG_PATH (if set)
XXX ALWAYS tacks on ".t[bg]z", NOT ".t[gb]z" !!!
2000-12-13 03:17:53 +00:00
ea03d7ba8e
change KERNEL_foo -> _KERNEL_foo, as suggested by matt green
2000-12-12 17:49:20 +00:00
f125ced5a1
Add option `KERNEL_foo', where `foo' is the basename of the build directory.
...
This will get added to the Makefile's IDENT= as -DKERNEL_foo.
2000-12-12 08:46:02 +00:00
3998cc1155
Nits.
2000-12-11 19:33:55 +00:00
c87303f168
Put back missing line break.
2000-12-11 14:38:43 +00:00
d299ad2a0f
Fix compiler warnings.
2000-12-11 13:58:46 +00:00
18900b7349
Note a bug.
2000-12-11 13:55:16 +00:00
9af5448e0a
Add a basic control program for iop devices.
2000-12-11 13:48:52 +00:00
1c3d23d12c
More IPv6-friendliness.
2000-12-09 22:39:12 +00:00
c7b5409a74
Rewrite this to use getaddrinfo(), and to use the canonical name of the
...
host rather than the hostname as returned by gethostname() if the hostname
does not appear to be fully qualified.
2000-12-09 00:47:57 +00:00
7ebe3b4a17
Add a new "-d" option which allows to define the directory of the
...
password file as the "-d" options of "pwd_mkdb" and "vipw".
2000-12-08 22:23:14 +00:00
f937707eab
Improve description of "-d" option.
2000-12-08 22:21:44 +00:00
6deb512a7c
The "-m" option makes onyl sense with at least one argument. So enforce
...
that and update the documentation accordingly.
2000-12-08 21:51:21 +00:00
48698d8229
Remove obsolete "domake" variable.
2000-12-08 21:24:16 +00:00
e5d0716506
Fix broken argument parsing:
...
- "-m" shouldn't option be passed to "make".
- Avoid buffer overflow while construction shell command to invoke "make".
2000-12-08 21:09:37 +00:00
e0d4418a25
Convert to TI-RPC, modeled after mountd(8) since we do host-based
...
access checking (via libwrap) like mountd(8) does.
Also, garbage-collect a bunch of stuff that is normally created by
rpcgen(1) that we'll never use in this program.
2000-12-08 20:08:43 +00:00
89d963e947
Don't try to create or move directory if only '-d' is given (man page
...
says '-m' is needed for that). Problem reported by Johnny C. Lam.
2000-12-07 17:44:03 +00:00
f4136e8234
Document ``/'' as default directory to avoid confusion of the users.
2000-12-07 12:55:06 +00:00
d78c1c9e2d
Back out last change on sugestion by Klaus Klein:
...
While it was technically correct it was confusing for the user.
2000-12-07 12:53:14 +00:00
32a56dbd39
Add a new "-d" option which allows to specifiy the root directory of the
...
password database.
2000-12-06 14:04:25 +00:00
1bfef38d9b
The default directory is "", not "/".
2000-12-06 13:54:08 +00:00
aac23d3263
correct pathname
2000-12-04 16:11:56 +00:00
1b5622c854
correct location of config file
2000-12-04 16:11:07 +00:00
c9236bb0cc
$KAME$ cleanup. address PR 11615 (CMSG_SPACE should be CMSG_LEN).
...
lots of stabilization/spec cleanup. sync with kame.
2000-12-04 07:09:35 +00:00
b1ba1c6a53
$KAME$ cleanup. address PR 11616 (CMSG_SPACE should be CMSG_LEN).
...
couple of stability/protocol conformance fixes. sync with kame.
2000-12-04 07:05:47 +00:00
a2ca80c86b
$KAME$ cleanup. address PR 11616 (CMSG_SPACE should be CMSG_LEN).
...
sync with kame.
2000-12-04 07:04:37 +00:00
8b87a48e0e
$KAME$ cleanups. sync with kame
2000-12-04 07:03:17 +00:00
a2877b394c
Don't emit MACHINE/MACHINE_ARCH. Instead emit a TARGET_MACHINE=machine
...
instead.
2000-12-03 07:06:15 +00:00
5cde4cf735
If a port-specific Makefile.<port> doesn't exist, try a arch-specific
...
Makefile.<arch>.
Emit MACHINE=<port> and MACHINE_ARCH=<arch> to the emitted Makefile.
2000-12-02 23:01:54 +00:00
e077acfb61
Document that text (console) modes need a depth field of 4.
2000-12-02 21:58:10 +00:00
1e2914d00b
Document that the path to the configuration file given on the command
...
line must be absolute, unless the -d option is given on the command line.
2000-12-02 02:15:34 +00:00
0833efd07d
Remove extern variables and functions now declared in dkstats.h.
2000-12-01 02:10:22 +00:00
80bd9216d2
ANSIfy.
2000-11-30 23:59:03 +00:00
4b8a7a0e49
Fix pkg_info w/ URLs (*sigh*)
2000-11-30 10:09:15 +00:00
6ce96c999f
several clean ups:
...
- don't include eeprom support on sparc64.
- work out if we are eeprom or openprom from the results of open()
and/or ioctl(), rather than grovelling the kernel.
- move all eeprom specific code to eehandlers.c
- update manpage for sparc64 usage, remove delete -N switch
with these changes, eeprom(8) no longer needs to be setgid.
2000-11-28 22:31:37 +00:00
057fcccd0c
Default crontab size limit is 256k, not 32k; correct documentation to
...
match code.
2000-11-28 14:06:13 +00:00
9ff73e166a
Oops; the increment needs to be in check1pkg() for the case where the user
...
specifies a list.
2000-11-28 05:23:35 +00:00
23451da968
pkgcnt was incremented twice during a `check'...
2000-11-28 05:21:57 +00:00
fc8a285aa2
Fix timeout in expect():
...
The FTP coprocess formerly wrote the output of the "get | tar vxf -" pipe
to stderr, which resulted in no output to the feedback pipe (stdout), and
thus the timeout was not updated for any line printed by the "tar" process.
This was now changed to also feed back the chars to the expect() routine,
updating the timeout handler. The "also" part is implemented by passing
the output through "tee /dev/stderr".
At least NetBSD and Solaris have this, so no problem there.
Thanks to Frank van der Linden for helping me to debug this.
2000-11-28 01:16:01 +00:00
04adf420b1
Don't terminate the loop after getting a short packet, either.
2000-11-27 17:36:19 +00:00
a23cc61626
For BPF, we must loop on receive_packet(). BPF may return multiple packets at
...
once, and we obviously won't get a select() hit for each one in that case.
2000-11-27 17:33:02 +00:00
33515cb532
Make sure to BPF_WORDALIGN() the buffer pointer for each packet, as BPF does in
...
the kernel. Otherwise the pointers get out of sync and dhcpd goes nuts.
2000-11-27 17:08:16 +00:00
ec58d85250
Don't mkdir("/usr/tmp") in a desperate try to get some space.
...
If it's there, use it. If it's not there - bad luck.
Pointed out by Simon Burge <simonb@wasabisystems.com>.
2000-11-26 03:12:01 +00:00
c40ad1440d
cast isprint() parameter to (unsigned char) - it looses if the character has high
...
bit set when the architecture is using signed char by default
This fixes bin/11556 by Michael Eriksson.
2000-11-24 09:53:36 +00:00
50ac5d898b
move rcsid to the top
2000-11-24 07:42:07 +00:00
048d058532
Fill in 26 defines for MNT2_NFS_OPT_ which the configure script didn't
...
find and were lost in the upgrade of am-utils.
2000-11-21 12:14:18 +00:00
6bc7e18094
Don't try to deallocate an object pointed by NULL pointer. Instead,
...
deallocate the right one.
2000-11-21 03:47:41 +00:00
45b07c3e8f
Since amd compiles with WAUDIT=2, include it in Makefile.
2000-11-21 02:03:26 +00:00
b002f5435b
With RARP, MAC asks, and IP answers. Fixes PR 11330 by Thilo Manske, who
...
also provided the fix (modulo formatting).
2000-11-20 14:59:30 +00:00
f8f9801395
Use empty string as default prefix so that e.g "/etc/spwd.db" is used
...
instead of "//etc/spwd.db".
2000-11-20 14:09:36 +00:00
20845d16f4
remove outdated comment
2000-11-20 01:58:43 +00:00
c9669422d2
Make config_local.h more cross-compile safe. Thanks simonb!
2000-11-20 01:56:13 +00:00
d53f0cf553
Fix thinko on my part (we do have setitimer).
2000-11-20 01:23:14 +00:00
0f1a444c28
restore ID tag (forgot removing $$)
2000-11-20 00:27:23 +00:00
e5d9f656ce
Replace old build structure with new reach-over one.
2000-11-20 00:24:41 +00:00
4f035159de
Import of amd reach-over Makefiles for using the sources in dist/am-utils.
2000-11-20 00:16:18 +00:00
9c9d109bdd
Fix bin/11253: seg-fault in mopd
...
Once we found the correct slot, make sure dle points to it. dle was left
pointing out of the array by the for(;;) loop.
Fix from Ken Wellsch <kwellsch@tampabay.rr.com>
2000-11-19 16:40:16 +00:00
7996c8de3a
de-__P-ify.
2000-11-19 11:15:01 +00:00
a1a91fd28f
if there are no locators or parent, don't output those arrays. (Sometimes
...
you really want no devices whatsoever. In that case, you get unused
static var warnings from the compile.) Reviewed by sommerfeld.
2000-11-18 00:51:29 +00:00
c1fd8f00d4
Add forgottern addarg(&al, NULL, 0) before execve() to prevent coredump.
2000-11-16 08:33:33 +00:00
a32617f770
This is now 8.2.2-P7, so update VER.
2000-11-13 22:45:05 +00:00
a3bb9e16b4
Report, and detect and correct inconsistencies in, the number of clean
...
segments. Patches from Jesse Off <joff@gci-net.com> (PR #11470 ).
2000-11-13 00:30:48 +00:00
d045d83e39
Make ntp work on sparc64 (workaround for toolchain problems) by
...
adding -msoft-quad-float.
2000-11-12 19:48:55 +00:00
18c121ba47
ispell
2000-11-12 15:32:57 +00:00
980886f151
do not advertise dynamic/cloned routes
2000-11-10 18:15:57 +00:00
7da1bb7a9c
synchronize with BIND 8.2.2-P7.
...
- resolve conflicts (there are many conflicts with $NetBSD$ tags -
dunno why they happen).
- type pedant (couple of typecasts).
correct yacc-generated file handling. remove bin/named/ns_parser.h,
use the header yacc generates at compilation time.
2000-11-10 09:56:56 +00:00
efad173586
Add amd.conf.5 from dist/am-utils/scripts here, and install it.
...
Fixes PRs 5051, 7524, 8999, 10814.
XXX: Why are amd & friends not using reachover Makefiles, but a copy of
the source? This should be fixed...
2000-11-08 12:00:48 +00:00
bfef63a365
do not print "PIM" twice
2000-11-08 07:23:54 +00:00
68fa36f81f
Avoid segmentation fault if "dns_zone_lookup()" is called with an empty
...
string as name. Problem noted by Simon Burge.
2000-11-07 13:21:36 +00:00
279552d3db
fix up various .Nm abuses:
...
- keep the case consistent between the actual name and what's referenced.
e.g, if it's `foo', don't use '.Nm Foo' at the start of a sentence.
- remove unnecessary `.Nm foo' after the first occurrence (except for
using `.Nm ""' if there's stuff following, or for the 2nd and so on
occurrences in a SYNOPSIS
- use Sx, Ic, Li, Em, Sq, and Xr as appropriate
2000-11-07 06:43:24 +00:00
ebcd47ebf3
use .Xr
2000-11-07 05:44:50 +00:00
6ccf8e332e
format the option descriptions in a more standard (and imho readable) style
2000-11-05 03:05:48 +00:00
3854f3f705
Fix behaviour of 'useradd -m': it is now a fatal error if the target home
...
directory already exists. Previously new skel files from /etc/skel were
copied and permissions/ownerships changed even if the directory already
existed.
2000-11-04 04:31:43 +00:00
dd8effead0
Adapt to the new line discipline scheme.
2000-11-02 21:40:37 +00:00
341453a017
Remove duplicate entry for -d option, fixing misc/11414.
...
Sort options while I'm here.
2000-11-02 18:16:43 +00:00
6a3b366a8c
Patch from the ISC DHCP CVS repository, fix dhclient problem,
...
"Re: dhclient still taking up 95% of CPU" in current-users:
: Fix for bug #416 : If a server hands dhclient an insanely large
: lease time, select() can get passed a too-large timeout, causing it
: to return EINVAL. This fix restricts the select() timeout to one day.
2000-11-02 03:14:21 +00:00
e3e05b89d4
Patch from the ISC DHCP CVS repository:
...
: Tweak omapi_protocol_connect() so that authenticators are sent in the
: proper order.
2000-11-02 03:14:02 +00:00
a2358fe791
Remove some debugging cruft in the removal of user home directories
...
accidently left in from revision 1.25.
2000-11-01 22:35:30 +00:00
dc598d2a0c
Run a "chmod -R u+w <newhomedir>" after copying files from skeldir.
...
Noted by Hubert Feyrer in private mail.
2000-11-01 22:29:10 +00:00
2ad83f6dcf
Don't let usage messages wrap around on an 80 column terminal.
...
Problem noted by Hubert Feyrer in private mail.
2000-11-01 22:18:22 +00:00
cd0d2f37f0
backout previous, it was redundant
2000-11-01 06:19:35 +00:00
5e5edf3d3a
clean unnecessary yacc-generated source.
2000-11-01 06:17:36 +00:00
efeb1d1e82
Don't swallow '%' in file/directory names.
...
Patch submitted in PR 11352 by Brook Milligan <brook@biology.nmsu.edu>
2000-10-31 23:47:05 +00:00
70a24dc7c0
Change from sprintf() to snprintf() where we may print externally
...
supplied data of unknown length.
Changes adapted from FreeBSD-SA-00:61.
2000-10-31 12:17:07 +00:00
b56cc4466d
Patch from Takahiro Kambe to fix crashes if dynamic DNS updates
...
are used. This fixes PR bin/10665 by Mason Loring Bliss.
2000-10-29 22:55:57 +00:00
4f394222d2
Pull in /etc/mk.conf unconditionally, not only on SunOS.
...
Discussed with Alistair Crooks.
2000-10-27 11:49:23 +00:00
3204ca286c
pcvt is dead.
...
XXX: better wording for lines 99-101?
2000-10-27 11:31:32 +00:00
9c6cafac02
Change direct calls to make to ${MAKE}
2000-10-26 06:00:48 +00:00
931aadfd80
s/bsd/BSD/
2000-10-25 15:55:44 +00:00
a6e6938ba6
Needed bsd.own.mk before MKDOC gets defined. subdir picks it up too late
2000-10-23 06:45:18 +00:00
45ad1d18bb
Only descend into the doc directory if ${MKDOC} != no.
2000-10-22 17:17:08 +00:00
f5abf3cd7a
Introduce some caching.
2000-10-21 00:55:23 +00:00
b2475f7e19
Make showmount -e work on lp64be. From Matt Green. While at it, also
...
fix another occurence of passing &int to xdr_long.
2000-10-20 11:49:40 +00:00
e89ad55da9
cast pw_change (a time_t) into long and printf it as %ld
2000-10-18 01:45:12 +00:00
5dea32f506
Make it compile again.
2000-10-17 16:12:20 +00:00
0cb6a7cf94
Merge 3.0b2pl9 with head.
2000-10-17 16:10:38 +00:00
70a42dc992
DHCP 3.0 Beta 2 Patchlevel 9
2000-10-17 15:07:41 +00:00
eafe08d5e9
Don't make references to _10Mb/s_ Ethernet; from Christian Weisgerber in
...
PR bin/11239.
2000-10-17 12:23:03 +00:00
6dfb84a930
For userinfo - if a password change or expiry time_t is 0, print "NEVER"
...
instead of some date around Jan 1, 1970.
2000-10-17 05:43:10 +00:00
5114e81f10
Handle -G for the useradd case (usermod was already correct). Also
...
show warning if a non-existant group is specified.
Patch from PR bin/11123 by David Edmondson.
2000-10-17 05:31:50 +00:00
051741ede8
Document the skel-dir and shell default settings.
...
Clean up skeleton dir list.
Part of fix for PR bin/10985.
2000-10-17 04:54:43 +00:00
97c54a1bab
Use flags to set which parts of a passwd entry are to be changed.
...
Before removing the home directory of a user check that
+ the user does not have uid 0
+ the user is the owner of the directory.
and remove the files using the effective user-id of the user. Show
a warning if the directory is not removed.
Use asprintf and fgetln for some string work to remove arbitary string
length limitations.
Fixes for PRs bin/11100 and bin/11103.
2000-10-17 04:53:27 +00:00
20fa427df4
Remove unneeded skel files.
...
Part of fix for PR bin/10985.
2000-10-16 13:46:48 +00:00
73cc97669f
Correct usage message: -p and -d can't usefully be used together.
2000-10-15 13:34:20 +00:00
4be95e0e9d
Use .Ql where appropriate.
...
-p and -d are, for practical purposes, mutually exclusive.
2000-10-15 13:32:13 +00:00
95066d7f25
Put usage message in KNF order.
2000-10-15 12:46:31 +00:00
b0c5636424
Canonicalize SYNOPSIS.
...
Widen left column of option list.
Add FILES section, so the possible values of <dev> are clearer.
2000-10-15 12:44:11 +00:00
2530603bd5
Grammatical and formatting cleanups.
2000-10-15 12:37:16 +00:00
0e32b4bfb3
LP64 format string cleanup. Problem reported by garbled.
2000-10-15 12:27:25 +00:00
ee64a7181e
Minor grammatical touch-ups.
2000-10-15 12:25:17 +00:00
d8212a986b
sync with latest kame version
2000-10-15 11:45:16 +00:00
4e3f859aad
Render what text there is into something closer to English.
...
Credit the WIDE project, since the licence requests that.
2000-10-14 21:10:38 +00:00
5f70e573c1
- replace DBDIR, ETCDIR and RUNDIR with /var/db, /etc, /var/run.
...
Original dhcp package, those strings are replaced with real pathname
when creating catman files. Since we install man files, those strings
should be replaced with real pathname.
2000-10-14 05:14:01 +00:00
eba963ea82
Fix more format string fallout.
2000-10-12 06:33:23 +00:00
43851beb31
Make it compile again after format string changes.
2000-10-12 06:11:40 +00:00
8ca6dec6ba
Make it compile again after format string changes (this change was obviously
...
never tested).
2000-10-12 06:07:04 +00:00
9bd605c103
Make it compile after format string changes.
2000-10-12 06:03:32 +00:00
d8302e2d73
More format string cleanups by sommerfeld.
2000-10-11 20:23:46 +00:00
0eafc475c2
/etc/mail/aliases, not /etc/aliases. PR 10167.
2000-10-11 16:51:55 +00:00
bf24eb4e3f
Check if $PKG_PATH is set AND contains something useful. Stops
...
pkg_info from spewing.
2000-10-11 11:09:20 +00:00
5f69d95c26
Check right variable to see if it's a URL (pkg -> cp)
2000-10-11 11:08:04 +00:00
b31af88872
fix indentation
2000-10-11 11:01:41 +00:00
2f4f733952
rpcinfo is in section 8.
2000-10-10 14:34:13 +00:00
8d6bd26624
Let `-' mean stdin.
2000-10-10 14:33:23 +00:00
e92c3f2867
- The type of return value of setmode is a void * and getmode takes it,
...
rather than mode_t *.
- Free the storage allocated by setmode unless it is obvious that program
exits immediately.
2000-10-10 14:30:40 +00:00
ecb9f85737
cast size_t to u_long on printing. sync with kame
2000-10-10 13:03:27 +00:00
0d592a8998
nuke link-locals correctly on -c. sync with kame
2000-10-10 10:14:36 +00:00
589e705b57
Remove unneeded header <db.h>.
2000-10-09 19:11:58 +00:00
6cc0c78181
Remove unneeded header <sys/syslimits.h>
2000-10-09 19:06:08 +00:00
f5b925151e
Allow SRCS, LDADD to be set on the command line, and still add the files.
2000-10-09 17:03:20 +00:00
32166d4f75
Only pull in <vis.h> when debugging expect(), i.e. EXPECT_DEBUG is set.
2000-10-09 14:35:27 +00:00
23dc98ae44
Don't try to use yydebug when we're building on a foreign system. Not all
...
yaccs provide it (notably GNU Bison 1.28).
Fixes the final part of PR#9112 (building under GNU/Linux).
2000-10-08 11:33:40 +00:00
ffa892c2d7
use poll(2).
2000-10-08 06:40:42 +00:00
ff0a9e9ed1
remove bogus text in BUGS.
2000-10-07 23:31:18 +00:00
6626345485
avoid fd_set overflow. see openbsd select(2).
...
XXX should we use poll(2)?
2000-10-07 06:53:41 +00:00
d074de9004
avoid fd_set overflow
2000-10-07 06:42:40 +00:00
829f1b8451
avoid fd_set size overflow. from deraadt@openbsd, sync with kame.
2000-10-07 06:41:37 +00:00
74b478c63c
printf-format audit. from sommrfeld@netbsd.org. sync with kame.
2000-10-06 00:13:01 +00:00
36f6fb7e06
mtree uses strsvis, not strvis.
2000-10-05 20:16:02 +00:00
5b09090e8e
insure -> ensure
2000-10-05 12:35:33 +00:00
037fd8a74e
Make even more silent, only spit out stuff if -v is given.
...
Found during a post-install of a fresh machine:
1. setenv PKG_PATH ftp://smaug.fh-regensburg.de/pub/NetBSD/arch/i386ELF/All
2. pkg_add tcsh ssh XF86Config
3. Run XF86Config
4. pkg_add kde
5. Be done.
We should do this from /etc/rc.local on first boot... :-)
2000-10-04 16:01:50 +00:00
a93350bb37
document output format, so that users would know exact meaning
...
of printed statistics
2000-10-04 11:40:51 +00:00
70875bf54c
add new cipher DOI # including AES.
...
add CR payload decoder. fix ID payload decode.
have __attribute__((__packed__)) for align picky arch
(tcpdump.org code has better fix with lots of memcpy, however,
tcpdump.org version needs more verfication).
basically, sync with kame tree.
2000-10-04 03:53:24 +00:00
adf3f4b907
Fix SYNOPSES:
...
Options without arguments go first in a bunch (see /usr/share/misc/style)
"add", "del", "info", "mod" arguments to user(8) and group(8) are command
modifiers, not normal text.
-D is not optional when setting the defaults for useradd(8)
Also add a missing .Ar to groupinfo.8
2000-10-03 19:32:23 +00:00
ef44b18354
Split the SYNOPSIS into three cases, since not all options can be used
...
together. The three cases are:
Adding a virtual terminal (can take -t/-e to configure)
Deleting a virtual terminal (can take -F to force)
Adding or removing a keyboard or multiplexor (can take neither of the above,
and the index is optional)
2000-10-03 19:08:50 +00:00
74521fc775
Use \(mu for a multiplication sign.
...
Use .Ql for literals in running text.
Use .Ar when referring to arguments.
2000-10-03 14:21:47 +00:00
ea46e54f3e
Use \(mu when we need a multiplication sign.
...
Use .Bx.
Use .Ql for literals in running text.
2000-10-03 14:20:52 +00:00
78907e0169
don't give result of function directly into syslog, use "%s".
2000-10-03 13:54:31 +00:00
5c0e061414
Free the bind-address list entries, as well as the list itself.
2000-10-03 13:28:27 +00:00
08964241f9
The usual formatting fixups.
2000-10-03 12:47:13 +00:00
7faddc8d05
Only one fix here -- use .Ar when referring to arguments in running text.
2000-10-03 12:38:05 +00:00
867a62d338
Apply .Fl, .Dq, .Ql and .Ar where necessary to fix formatting.
2000-10-03 12:34:05 +00:00
41ed24d174
Fix the blank line in my last commit.
...
.Fl-ify mentions of "-D"
Use .Dq rather than ""
2000-10-03 12:18:09 +00:00
97a603e5b0
Add a "-b" option to specify one or more local addresses to bind
...
to instead of the default INADDR_ANY.
2000-10-03 11:45:30 +00:00
5e5f388806
* Make it a tiny bit clearer that this also works for IDE disks (by
...
listing 'wd0' as example device besides 'hk0' and whatnot)
* We don't have format(8), remove from the SEE ALSO section.
2000-10-02 21:14:05 +00:00
1e69382368
clean up dev_t-related portability defines (and actually #define dev_t now).
...
Make major() et al match current NetBSD implementation. In reality,
the code here in config which plays with these bits should be cleaned up
to treat major and minor separately. (They only reason they're being mashed
together is storage convenience.)
2000-10-02 19:59:42 +00:00
da723c733f
include copyright notice in binary even if bootstrapping.
2000-10-02 19:57:23 +00:00
506c287193
bump ALIGNBYTES up to 7 -- that way this'll have more of a hope
...
of working on non-NetBSD systems with 64-bit pointers. (affects only
the MAKE_BOOTSTRAP case, and then only if BSD not defied.)
2000-10-02 19:51:07 +00:00
463d864ef0
nuke __P, and convert all functions to use ANSI-style declarations.
...
Also, do a few trivial KNF cleanups (e.g. newline at start of fn if no
locals). Verified to have no effect via diff on new and old compiled
binaries.
2000-10-02 19:48:34 +00:00
a755a0d943
remove vestiges of checks for __STDC__
2000-10-02 18:59:03 +00:00
b56ee45833
General prettification.
...
There's a glitch in the display describing the "group" option in
usermgmt.conf. I can't get rid of the blank line above it without it
losing the line break after the colon as well. Anyone?
2000-10-02 18:28:28 +00:00
8c07344989
Put sections in canonical order.
...
"stdin" is not a filename (use "standard input", which is at least English).
Typo fix (ro -> to).
2000-10-02 17:04:12 +00:00
342d4af757
Put sections in the canonical order.
...
Correct wskbd(4) reference.
2000-10-02 16:45:20 +00:00
7447cfe382
Put sections in the canonical order (from mdoc.samples(7)).
...
Add a "HISTORY" section.
2000-10-02 16:21:27 +00:00
87589cb557
Replace "foo is mutually exclusive of bar" with "foo and bar are mutually
...
exclusive".
2000-10-02 15:11:43 +00:00
0a2663ad0b
Not every FTP server says nicely "Goodbye".
...
If they used some other string, pkg_add would hang forever.
The result of testing things only against one FTP server...
2000-10-01 20:34:30 +00:00
197ee08b13
Don't replace the pkg version with -[0-9] on pkg alternates ("{foo-x,bar-y}")
...
as this will remove things like trailing '}' etc. and doesn't work in general.
As mentioned in the already-existing comment, doing TRT here would mean to
partly expand the pattern, then replace the versions on alternatives.
Unless our pkg pattern parser gets these hooks, cowardly step back.
2000-10-01 12:23:21 +00:00
956cbe59dd
Don't refer to the skel-directory files here.
2000-10-01 09:18:59 +00:00
7ebee5683d
Save the "preserve" value in the defaults file.
...
Use _PATH_CSHELL from <paths.h> instead of the string "/bin/csh".
Don't cast NULL to the pointer type being checked.
2000-10-01 08:56:28 +00:00
9014a6cdcd
Fix typo.
2000-10-01 08:54:07 +00:00
05b7923a90
Formatting cleanups around the description of geomspec.
2000-09-30 17:58:19 +00:00
802499fd1c
Avoid using savestr() on something which will later be passed to
...
free(). Raised as a potential security issue on bugtraq. No actual
exploits known.
2000-09-30 12:44:37 +00:00
9da93f35c8
Add functionality for adding usernames to secondary groups via the
...
"usermod -G group user" command.
Fixes PR/11071.
2000-09-29 10:37:26 +00:00
a894c0a5ef
Goto label was in slightly wrong place.
2000-09-29 00:30:56 +00:00
9a18c8bb35
Use ROUNDUP to pass addresses to the kernel aligned on a long boundary. Use the sa_len field of each address instead of sizeof(). Makes arp work on 64bit architectures.
2000-09-28 01:11:31 +00:00
c8b98b814c
syslog() string format hole.
...
http://www.securityfocus.com/templates/archive.pike?start=2000-09-24&fromthread=0&mid=85023&list=1&end=2000-09-30&threads=0&
2000-09-26 17:44:38 +00:00
4361ae7cb0
Correct a pasto in moduser(), the effect of which was to replace the
...
contents of the GECOS comment field with the default shell name, when
a user's information was modified.
Fixes PR 11072.
2000-09-26 11:35:48 +00:00
ff579c68fd
Style nit -- hard-coded path names belong in pathnames.h.
2000-09-24 09:45:55 +00:00
b181f2aa02
- resolve conflicts
...
- adjust 2.4.0 new tty subsystem back to bsd.
- start on multilink stubs
- clean up warnings
Status:
- paulus knows about the fixes, but he has not responded yet as to if
I should commit them or not].
- I've tested ipv4 connectivity and itojun tested ipv6 [many thanks!]
- Missing from this are pluggin examples and pppdump code because they
are contain gpl code.
- This version of pppd is again gpl free now!
2000-09-23 22:39:29 +00:00
5f5270c935
import of a cropped down pppd-2.4.0 circa sept 10 directly from the cvs
...
repository.
2000-09-23 22:14:39 +00:00
61daa070a6
If we're about to add a user whose specified home directory does
...
not exist, and the "-m" argument has not been specified, then output
a warning.
2000-09-20 19:28:40 +00:00
2565bd1854
oops, use MAKEDBM_S
2000-09-19 18:24:54 +00:00
06e8cfa1f8
add a non-enabled rule to build solaris and linux shadow files.
2000-09-19 18:23:43 +00:00
b8bb84a3b0
Clean one paragraph.
2000-09-19 16:28:52 +00:00
5ac29b83b7
Don't prematurely terminate log message on a 0x80 character
2000-09-18 13:04:53 +00:00
f9c3dbedef
Silly as it may be, update the #! line in this script to match the pkgsrc
...
wish install.
After the freeze, I'll pkgsrc this script -- it's kind of cute.
2000-09-14 18:00:44 +00:00
a5d0cbc5e5
sync with latest kame.
...
- improve logging.
- correct multicast address check for the relayed destination.
- repair EPRT translation.
- support 227 result without paren.
- change behavior on no-argument to more sensible side
(before: relay telnet, now: error)
WARNING: you may need to change your startup script.
2000-09-14 00:36:10 +00:00
ed870024f2
sync document with latest kame. now uses 3ffe:501:ffff::/48 in example.
2000-09-14 00:30:23 +00:00
a12b66cf79
Don't abort if pushing to one server in the ypservers map fails.
...
There might be serveral more waiting to be pushed to.
This is only 1/2 of the fix. ypxfer(8) also needs a change to
avoid a false error, but this allows pushes to continue to work,
at least.
Problem noted by aflury@zembu.com and agordon@zembu.com .
2000-09-13 21:40:15 +00:00
20084585ac
Use setlocale(3) to activate support for international characters.
...
This should fix PR bin/11007 by Bill Sommerfeld.
2000-09-13 21:20:21 +00:00
b6f7dd7187
prevent one byte overrun in printline()
2000-09-13 15:46:32 +00:00
f1fec63273
When @hourly is specified, set not just 23 but bit 0 through 22 also in
...
the bitstring e->hour. Fixes PR#10961.
2000-09-13 04:07:34 +00:00
5303e70da5
Make targets which are generated with rpcgen depend on the rpcgen binary.
2000-09-10 23:21:49 +00:00
4412293540
install manpage
2000-09-10 19:45:18 +00:00
332f680f77
install manpage
2000-09-10 19:38:03 +00:00
4649cc23c5
Update some instances of file movement in the ISC release.
2000-09-05 00:50:07 +00:00
e59a2459c4
Merge 3.0b2pl2 with head.
2000-09-04 23:19:27 +00:00
4ca7dd8c85
DHCP 3.0 Beta 2 Patchlevel 2
2000-09-04 23:09:46 +00:00
4918722a89
For commands and utilities, use EXIT STATUS rather than RETURN VALUES or
...
DIAGNOSTICS as appropriate (and documented in mdoc(7)).
2000-09-04 07:35:15 +00:00
b09f22f48f
When downloading and extracting a file (in ftp:
...
'get pkg.tgz "| cd /var/tmp/inst ; gunzip | tar -x -f -"'), handle
two cases better:
1. Timing out ftp connections: Make sure the hanging pipeline gets a ^C
(SIGINT), and wait until the ftp prompt is available again. Else we
may nuke away tar's working dir, and it may be displeased.
2. One of the commands from the pipeline exiting: caught via SIGCHLD;
for this signal to be delivered, a empty handler is needed)
Adresses PR 10925 by Greg A. Woods <woods@planix.com>
2000-09-01 04:42:57 +00:00
80c46f750e
* Code cleanup
...
* Add a comment in one appropriate place
* Indent properly
2000-09-01 04:36:20 +00:00
c06c5a0348
Add some (commented out) debug flags
2000-09-01 04:34:03 +00:00
5914867b00
repair interface MTU grabbing. real cause of PR 10923.
...
from koji@jp.above.net . sync with kame.
2000-08-31 16:40:04 +00:00
a022cf9d37
Use
...
${MAKE}
instead of
make
2000-08-30 23:51:46 +00:00
7a26b9af55
Include the fact we're making replies in the debug() output.
2000-08-30 11:01:43 +00:00
d332db18be
Make pkg_add & friends print the files they push through tar(1) to
...
stderr, thus making them visible. (tar's stdout goes somewhere else)
2000-08-29 03:56:56 +00:00
14dbdb5745
* Make a few functions public so this code can be used by other programs
...
* Comment a workaround for a certain lukem ftp behaviour
* Fix a bug where a invalid initial dir was not caught early enough
2000-08-28 21:35:14 +00:00
0186d67219
Hide "trying PKG_PATH ..." message, only print on -v
2000-08-28 15:39:35 +00:00
63285a5cdb
tyop. inerface != interface
2000-08-25 07:15:02 +00:00
7652453dd5
Initialize variables which I recently changed storage class from file global
...
to auto. Pointed out by Launey Thomas <ljt@alum.mit.edu>.
2000-08-25 06:25:59 +00:00
3f9bbd97f5
Defined datobyte(fs, da) macro, to ensure cast to off_t.
...
Fixes overflows with >2GB partitions. Reviewed by <enami@netbsd.org>.
2000-08-25 05:27:49 +00:00
c829aa7773
Fix ingroup() to not check gid against trailing groups not set by
...
getgroups().
Reported to security-officer, but not a security hole, since
"operator" is not gid 0.
2000-08-24 17:40:16 +00:00
880baa236b
Don't pass null pointer to syslog.
...
lpd[6813]: mail sent to user itohy about job foo.ps on printer lp ((null))
^^^^^^
2000-08-24 02:03:54 +00:00
5056d0ce7c
Add support for "microwave oven robustness" with wiconfig -M.
2000-08-23 19:01:04 +00:00
ab1ba36358
replace references to /etc/rc.wscons with /etc/rc.d/wscons
2000-08-22 08:49:01 +00:00
hubertf