XXX scsipi mid layer spews out a few "generic HBA error"s during device probe (no slave device on bus), I don't know how to fix this
XXX This whole thing should die now that we have wdc_amiga
Now, on the Amiga, we copy a small piece of code to chip memory and enable the
MMU from here.
On the DraCo, we setup %itt0 so that we shadow physical memory without
touching the page tables and very temporarily. The DraCo's memory layout
guarantees that there is no overlap in this case between physical and
virtual addresses.
This fixes a bug where Amiga's with physical memory at 0x200000 wouldn't boot
kernels >2M in size, and possibly other corner cases.
Joint work with Ilpo Ruotsalainen and Ignatios Souvatzis.
This fixes the problem where no grf* console would be found on startup because
they wouldn't match with any parent.
While here, memset() that structure to zero so that we either pass or crash
right away if the MI code changes again. From Leo Weppelman, as done on atari.
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
- disk_unbusy() gets a new parameter to tell the IO direction.
- struct disk_sysctl gets 4 new members for read/write bytes/transfers.
when processing hw.diskstats, add the read&write bytes/transfers for
the old combined stats to attempt to keep backwards compatibility.
unfortunately, due to multiple bugs, this will cause new kernels and old
vmstat/iostat/systat programs to fail. however, the next time this is
change it will not fail again.
this is just the kernel portion.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
clean up some other stuff along the way, including:
- use m68k/cacheops.*, remove duplicates from cpu.h.
- centralize a few declarations in (all the copies of) cpu.h.
- define M68K_VAC on platforms which have a VAC.
- switch the sun platforms to the (now common) proc_trampoline().
- do the phys_map thang on the sun platforms too, no reason not to.
now carries the name of the attachment (e.g. "tlp_pci" or "audio"),
and cfattach structures are registered at boot time on a per-driver
basis. The cfdriver and cfattach pointers are cached in the device
structure when attached.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
- Switch all m68k-based ports over to __HAVE_SYSCALL_INTERN.
- Add systrace glue.
- Define struct mdproc in <m68k/proc.h> instead of <machine/proc.h>.
(They were all defined exactly the same anyway, other than a couple
of the MDP_* flags.)
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.
New files are same as old (except for whitespace differences), except
that the new GENERIC doesn't have melody, because GENERIC defines
DRACO and the latter can't have it.
memory) greatly confuses the chip memory allocator and can prevent
some systems from even starting the kernel. Remove the initialization
of chipmem_start (it's initialized in locore.s).
into kernel_object where this was missing.
This is a no-op on ports where VM_MIN_KERNEL_ADDRESS==0, ie all but
cesfic.
Confirmed and corrected by Chuck Silvers.
boot loader image. Installboot can modify the default command in the
first-stage bootblocks, which will have no effect. Copy the default command
from the first-stage bootblock into the second-stage bootloader so modifying
the commandline with installboot actually works again.
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
and move them in their proper places.
Move the BRI registry from layer 2 (duh!) to layer 4, so active cards
(which don't have layer 3 or layer 2 in their driver). Remove all remaining
hard coded controller and driver types. Remove any arbitrary hard coded
limits, at least those that show up in the internal API.
This fixes PR 15950.
ragge