23f6f01a0d
ca -> lsu
2000-10-19 14:35:41 +00:00
517687da81
Get the major no right for uscanner.
2000-10-14 12:36:05 +00:00
2e9564263d
Enable building of additional kernel sets.
2000-10-02 12:51:33 +00:00
a912989e45
Add INSTALL_LAPTOP to kernels to be built.
2000-09-27 20:05:54 +00:00
8e735041d9
Prepare for USB scanners, and add Rio 500 support while messing.
2000-09-23 04:27:17 +00:00
b4b75848de
Add standalone "iso-image" target that can be run with DESTDIR and RELEASEDIR
...
set in src/etc after a "make release" in both "src" and "xsrc", to create a
ISO-image of the release in $RELEASEDIR/installation/cdrom.
Hook for architecture dependent pre/post-processing in etc/etc.*/Makefile.inc
are available as 'iso-image_md_post' and 'iso-image_md_pre', see
etc/etc.i386/Makefile.inc as an example. Might be useful for setting up
bootable CDs on alpha, sparc, ...
Reviewed by Todd Whitesel and Thomas Klausner.
2000-09-11 21:53:30 +00:00
2ea44b1dd4
install dosboot.com in the release(7) hierarchy.
2000-08-23 21:00:46 +00:00
ee4a3af175
This should be the final part of moving to 64 PTYs by default. Added
...
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
2000-08-12 13:43:40 +00:00
e36c17d6c2
Have port-i386 use installation/floppy, for conformance with release(7).
2000-08-11 09:20:38 +00:00
3e53e60091
Really, we don't need a 2nd pty0 in the floppy target.
2000-07-27 19:09:57 +00:00
db8e04e0f8
Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
...
"minimal" targets to use 16 PTYs.
2000-07-27 18:43:14 +00:00
81a51455cd
Fix brain'o in last, pointed out by Johan Danielsson.
2000-06-25 16:25:33 +00:00
685a0649a8
lm* -> sysmon
2000-06-24 00:43:26 +00:00
a32605d17c
pcvt is gone and therefore ttyv[1-7] as well.
2000-06-11 09:13:51 +00:00
63698a2c60
Revert to decemal numbering. From talking w/ Jason, we really should
...
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..
2000-06-09 17:58:29 +00:00
00ee1c57fc
Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
...
to macppc's MAKEDEV.
2000-06-09 16:59:03 +00:00
0377727ee6
Fix typo in last commit.
2000-06-04 09:34:58 +00:00
306acd3e78
Handle "bktr" related devices like audio devices:
...
- Create device nodes with numbered names (e.g. "tuner0").
- Create softlinks with unnumbered names (e.g. "tuner") pointing to device
nodes of unit 0.
2000-06-04 09:34:06 +00:00
e3fc70bd16
Add a ttyaction file for port-i386 that properly sets the ownership
...
on the console device when you log in using wscons on the console.
Why haven't we had defaults for this all this time?
2000-06-04 00:04:59 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
cac7cebd3e
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
...
- now raw partitions are used for memory disk ioctls
2000-01-21 12:28:22 +00:00
868dc892af
Put a copy of GENERIC in the kernel directory, too.
2000-01-19 08:36:30 +00:00
72a5ed2e26
allow "sh MAKEDEV ttyNN", where NN is 00 to 99.
...
single-digit "sh MAKEDEV ttyN" works in backward-compatible way.
XXX should bring it to other ports as well?
2000-01-09 02:37:06 +00:00
e2c4e62e16
Correct md* entries.
1999-12-18 03:09:44 +00:00
47523083ea
support fully qualified machdep names.
1999-12-15 05:23:13 +00:00
a87378c54a
Prototype file that selects i387 if the fpu is present.
1999-12-13 10:17:49 +00:00
eafd8f707f
Provide some more automation in the "make release" process. Also build
...
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.
1999-11-09 00:22:39 +00:00
652f0f8841
Back out previous
1999-10-18 22:41:23 +00:00
993ac32fff
Final chown user.group -> chown user:group changes.
1999-10-06 22:26:14 +00:00
018c7b4f42
Tidy up comments a bit, to make the manpages generated from the a bit
...
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
1999-09-18 00:23:35 +00:00
ad