344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
380e88d4f0
Adjust some comments.
1998-09-01 22:56:00 +00:00
6693724a83
Changed inaccurate comment on the sc_freq member of the driver's softc
...
structure. The frequency is represented in MHz rather than Hz. [PR/6805]
1998-09-01 22:22:03 +00:00
fec2fa9e43
Typo in device Id mask.
1998-09-01 21:04:43 +00:00
d58173741d
kill the last remnants of __BROKEN_INDIRECT_CONFIG. (only the pica port
...
used it, and it's non-working and apparently slated for replacement.)
1998-08-31 22:28:04 +00:00
860867bfec
macro argument protection.
1998-08-31 11:13:10 +00:00
73b946e04e
LSI64854 DMA engine driver.
...
Currently used by Lance Ethernet and NCR SCSI front-ends on sparc/sparc64.
1998-08-29 21:42:03 +00:00
17759893b0
Add rcs id
1998-08-29 13:44:49 +00:00
370a38c007
Add braces to make egcs happy.
1998-08-28 20:03:10 +00:00
f3bfb08d45
When determining the default media on the Vortex/Boomerang, don't pick
...
the full-duplex variant. XXX We should check the EEPROM for "default to
full-duplex".
1998-08-28 18:16:02 +00:00
b1447741da
Nuke Dprintf; fix formats.
1998-08-28 08:59:14 +00:00
dd0709d28d
Add selected `%b' bits.
1998-08-27 20:05:11 +00:00
142bff0170
Add missing entries and make it slightly more verbose.
1998-08-27 19:53:02 +00:00
b3279eb3dc
Move a few prototypes.
...
Whitespace cleanup.
1998-08-27 18:45:12 +00:00
fc397afa14
debug level 0
1998-08-26 15:06:37 +00:00
d9e417cde9
Add AdvanSys 930U and 940U SCSI controllers
1998-08-26 14:13:58 +00:00
6633896a67
Do some renaming of registers and make sure we get sound in both
...
channels on OPL3.
1998-08-26 13:08:10 +00:00
bb3c56652c
Make the OPL driver turn on the sound on sound cards that require it.
...
That makes it much more likely that we get any sound. DUH!
1998-08-26 12:10:22 +00:00
bc21c243cd
For non-MII Vortex/Boomerang, set full-duplex in the MAC CONTROL register
...
in epsetmedia() if full-duplex is selected (new feature on these cards!)
On MII Boomerangs, set the full-duplex bit in MAC CONTROL in the statchg
callback from the MII layer. Should fix full-duplex on these cards.
1998-08-26 01:32:41 +00:00
19b759c2e4
Define the full-duplex bit in the W3 MAC CONTROL register.
1998-08-26 01:29:03 +00:00
d4ec33b5f0
The new MI part of the AD1848 driver.
1998-08-25 22:36:40 +00:00
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
christos