f5e3c48aad
Depends on quota; when quotached runs while NFS clients are writing,
...
bad things happens.
2000-05-29 07:10:41 +00:00
e63bc36c7f
Call "load_rc_config()" earlier so that configuration variables are read
...
before command arguments are defined. Fixes PR bin/10220 by Ron Roskens.
2000-05-29 06:53:03 +00:00
f43d715728
Make the path relative instead of using BSDSRCDIR
2000-05-29 05:37:06 +00:00
239e79a9ad
Fix up some single quotes that messed up a line. (Thanks Wiz!)
2000-05-29 03:40:43 +00:00
54de2bfd70
Rip out semconfig, since it's now a NOOP
2000-05-29 03:29:50 +00:00
cd116b1569
Add fddi.c
2000-05-29 03:13:24 +00:00
c11100526b
Don't let the autodetection code get tripped up by negative mod-counters.
2000-05-29 02:57:34 +00:00
c7c33f1747
make egcs happy: ioasic.c:327: warning: suggest parentheses
...
around arithmetic in operand of |
2000-05-29 02:16:57 +00:00
f1f5c4d00e
Fix a couple of typos. (Thanks Wiz! :) )
2000-05-29 01:43:04 +00:00
4308599c5a
disallow bind(2) with IPv4 mapped address for now. port number check is
...
insufficient at this moment and we can bind(2) two sockets listen on same
port number.
for real fix, we need to check inpcb table with in6pcb. we can't
find inpcb chain from particular in6pcb chain (like finding tcbtable from tcb6)
luckily RFC2553 does not talk about bind(2) behavior for IPv4 mapped.
IPv4 mapped brings in too much complexities...
2000-05-29 00:03:18 +00:00
c0ccb49681
sync with reality in netbsd-current.
...
- pcb layer changes
- officially supported net interfaces
- minor typo
- draft # updates
2000-05-28 23:44:30 +00:00
bb3e285167
Add Cyclades-Z nodes.
2000-05-28 23:12:15 +00:00
c4f772eecb
Obtaining component labels from spares is not supported yet, but add
...
some code that makes some progress in that direction.
2000-05-28 23:12:01 +00:00
8576ef9a13
Add Cyclades-Z.
2000-05-28 23:06:39 +00:00
0936213012
Add Cyclades Y and Z multiport serial adapters.
2000-05-28 23:05:19 +00:00
39a667120f
In the event that an up-to-date component cannot be located for a specific
...
position, see if there is a failed component still hanging around that
we can use instead (but still mark it as failed). This leads to more
reasonable behaviour (and fewer surprises!) when autoconfiguring and
failed (or previously failed) components are still on the system.
2000-05-28 22:53:49 +00:00
5036bc4fc0
Add mca(4).
2000-05-28 22:38:54 +00:00
2499d71cdf
Add mca(4) man page. Xref and add some tr(4) info.
2000-05-28 22:37:46 +00:00
0ce56710af
Cleanup ETA calculation stuff.
2000-05-28 22:22:11 +00:00
6513ba6e74
Make this compile with UHCI_DEBUG in the presence of
...
-Werror: uhci_dump is no longer static.
2000-05-28 22:02:05 +00:00
2e7afc702d
Update.
2000-05-28 21:49:02 +00:00
e51303c17e
Mirror last change to GENERIC.
2000-05-28 21:48:52 +00:00
daa86a0be1
Add patchable "pnpbiosdebug" global if PNPBIOSDEBUG is compiled in,
...
and add PNPBIOSDEBUG_VALUE to initialize its value, defaulting to 1.
2000-05-28 21:46:04 +00:00
d12393eb8e
Add Ev tag to COLUMNS
2000-05-28 21:14:11 +00:00
fb6d063b8c
pnpbios from 1.344 didn't config. s/pnpbios0/pnpbios?/
2000-05-28 21:12:00 +00:00
7da3d45dfc
Cleanup iommu_attach().
2000-05-28 20:55:54 +00:00
57b382f034
Add a few comments.
2000-05-28 20:54:42 +00:00
33889a5e6c
Enable DDB.
2000-05-28 20:21:04 +00:00
4af4c47f80
Tidy up a little, improve PnP BIOS section.
2000-05-28 20:11:59 +00:00
b6c4eb81fd
Massive cleanup and syncing with GENERIC
2000-05-28 20:10:29 +00:00
5abcf38c02
Whitespace police.
2000-05-28 20:03:21 +00:00
db2af6e8dc
Place vsio.h in obsolete list.
2000-05-28 19:49:50 +00:00
f3eeb5b356
Remove vsio.h.
2000-05-28 19:42:31 +00:00
074bc79414
There is no reason at all to have DEC's internal state data structures for
...
the VS100 in our source tree. And especially not in /sys :-)
2000-05-28 19:42:01 +00:00
9c7cc2f669
Add a comment to note that removelist() and renamelist() are used by catman(8)
2000-05-28 19:30:19 +00:00
bdc8251646
Change printing of cpu number in the prompt in the MULTIPROCESSOR case
2000-05-28 19:03:55 +00:00
b4c87e6d41
Add proc0 to pidhashtbl so pfind(0) works.
...
Now trace/t 0 works in ddb, etc.
2000-05-28 18:52:32 +00:00
0866399258
brain-oh in last. test logsoftc.sc_pgid, not p.
2000-05-28 18:31:13 +00:00
166475069f
fix it so it compiles.
2000-05-28 18:17:59 +00:00
8a49d6bd31
Ensure that all callers of pfind() can deal with pfind(0) returning
...
a real procp* rather than NULL.
2000-05-28 18:17:07 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
16f02724d6
Some updates to the DEUNA driver:
...
- Change the transmit logic to send from a pre-allocated buffer instead
of doing DMA out of the mbufs directly. Timing shows that it takes
4 times longer to map in the mbufs via the sgmap routines instead of
just copying the data! This must be fixed sometine in the future.
- A bunch of other minor fixes.
2000-05-28 17:23:44 +00:00
e1e867b2a6
Well, the removelist and renamelist functions were not unused;
...
they are still used by catman. Add them back.
2000-05-28 16:23:55 +00:00
a56cb94b43
Deal with NULL file pointer for KTROP_CLEAR
2000-05-28 15:27:51 +00:00
5b3cb6b1a1
Add async I/O support.
...
FIOASYNC ioctrl command had been forwarded from wsmux to each mouse devices
and the devices had set their own event queue async mode. But no one had took
care of the event queue's mode of wsmux itself. Wsmux should make it's own
event queue async mode when it receive FIOASYNC command.
2000-05-28 10:33:14 +00:00
717e8dad36
Use new termcap interface.
2000-05-28 10:27:13 +00:00
c461529353
regen
2000-05-28 10:25:25 +00:00
f8091908b5
-correct description for 3c905b-FX (100 Mb only)
...
-add Neomagic 256ZX
2000-05-28 10:24:57 +00:00
f8a6b48d66
Don't silently truncate the voff_t offset to vaddr_t when passing it to
...
udv_attach. Pass the whole voff_t instead and do an explicite overflow
check before it is passed to the device's mmap handler (as "int", sadly).
2000-05-28 10:21:55 +00:00
ef06522539
Bump minor lib version of libtermcap & libtermlib
2000-05-28 09:59:48 +00:00
bouyer