perry
4d477e62b7
install ttyaction if it exists
2000-06-03 23:53:17 +00:00
fvdl
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
lukem
78abee064b
remove netstart
2000-05-13 08:07:01 +00:00
sjg
4157176c27
Added an obj target to ensure that KERNOBJDIR exists - in case
...
we are using MAKEOBJDIRPREFIX.
Fixed the comment about why we grab ../Makefile.inc
2000-05-06 07:52:19 +00:00
itojun
14e9ff0043
correct typo (sendmail upgrade)
2000-05-03 11:37:16 +00:00
itojun
366bbade5a
sync with sendmail upgrade.
...
- sendmail configuration files are in /etc/mail, not /etc.
- src/etc/aliases will be installed into /etc/mail/aliases (confusing)
- rc.d/sendmail warns if /etc/sendmail.cf exists.
2000-05-03 10:55:19 +00:00
sjg
45fb67b360
remove/change missleading comments
2000-05-03 00:10:33 +00:00
sjg
734bcf16ec
Use bsd.kernobj.mk
...
Also if KERNELS_DONE is defined skip building kernels. Handy if re-spinning
due to errors in distrib later on.
2000-05-02 06:41:44 +00:00
thorpej
0a43d29758
Install the localhost namedb file.
2000-05-01 05:29:34 +00:00
perry
31d7194c3f
Add "make distribution" for Postfix.
2000-04-30 21:45:55 +00:00
tsarna
163510ecf4
The file /etc/sysctl.conf is now run with sysctl -f at boot time.
...
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.
The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.
2000-04-08 23:02:53 +00:00
thorpej
47cd48f3db
Use distrib/sets/Makefile in the release: and new cryptoset: targets.
2000-03-28 00:39:17 +00:00
lukem
c132a440d2
install rc.d scripts
2000-03-10 11:59:35 +00:00
joda
89c2906ea5
explicitly allow writable directories when rebuilding the alias
...
database, otherwise this will fail if any directory in ${DESTDIR} is
g+w.
2000-03-01 16:48:35 +00:00
itojun
627898817e
sync with etc/namedb change (IPv6 loopback reverse database file)
2000-03-01 11:21:13 +00:00
mycroft
f4665e12b2
Install a blank sendmail.st here.
2000-02-26 18:42:31 +00:00
mycroft
ad78992969
Always checksum binary/kernel, now that there is at least one file in it.
2000-02-20 03:32:37 +00:00
mycroft
f10265540b
Always install GENERIC in the kernels directory.
2000-02-20 03:10:50 +00:00
erh
aae51fbc36
Check for CRYPTOPATH variable instead of "../domestic" when deciding to build the secr set.
2000-02-14 18:37:39 +00:00
tron
c089f6c69a
"sendmail" is in "src/gnu/usr.sbin/sendmail" now.
2000-02-09 08:15:12 +00:00
jlam
4a47d48db2
Install correct ld.so.conf if etc.${MACHINE}/ld.so.conf exists.
2000-02-05 18:25:01 +00:00
veego
bba35f4508
Install named/0000:0000:0000:0000:0000:0000:000 and ntp.conf to fix the
...
damage in distrib/lists.
2000-02-04 09:24:08 +00:00
veego
f250672496
We don't have a bind4.
2000-02-03 17:51:51 +00:00
christos
2c7fa0c23b
Pick up a machine dependent ld.so.conf
1999-12-13 10:19:32 +00:00
mycroft
6c011bf076
Install root's .shrc.
1999-11-05 11:31:40 +00:00
perry
ddcff2dcf5
Add an at.deny file by default, so that (by default) users can use at
...
and batch (as is historic practice, and as was our practice before
last year.) If someone wants to disable such use, they can just remove
the file.
1999-10-20 17:57:55 +00:00
mjl
e7795f36b9
Use sendmail.cf from $DESTDIR/etc instead of /etc for building the
...
aliases.db since that fails if we have a sendmail.cf installed that
has no MAILER(local) like nullclient.
1999-09-26 21:40:13 +00:00
sommerfeld
ef22c28d6f
Use ${CONFIG} rather than config so cross-builds can correctly select which one to use.
1999-09-16 00:30:06 +00:00
simonb
b729f2c755
Use ${INSTPRIV} with ${INSTALL}.
1999-08-21 06:27:29 +00:00
is
805851f4c7
Provide a script to compute the distribution set checksums.
...
Make the Makefile use it, instead of calling cksum manually.
1999-07-22 20:10:16 +00:00
mycroft
b28948e638
Make an aliases.db file when we install the aliases file.
1999-07-21 06:51:30 +00:00
fvdl
ec3e468086
sparc and i386 do not have ld.so.conf anymore now that they're switched
...
(or about to switch) to ELF.
1999-07-04 22:11:06 +00:00
itojun
134b5f49f2
rtadvd: advertise IPv6 prefix info via router advertisement.
...
(to be run on routers)
1999-07-02 09:28:16 +00:00
ross
59c991a23e
Document BUILD_KERNELS.
1999-06-30 18:42:03 +00:00
gwr
551aad7b51
The snap_kern target is not sufficiently flexible.
...
Allow Makefile.in to provide its own.
1999-05-21 03:45:50 +00:00
simonb
ae25beb28c
+ Put directories to create in ${RELEASEDIR} into a variable that
...
port-specific Makefiles can add to.
+ Separate snap_md into snap_md_pre and snap_md_post that are depended
on before and after snap_kern.
+ Build all kernels listing in ${BUILD_KERNELS}, but don't put them in
${RELEASEDIR}.
1999-04-27 03:08:02 +00:00
fair
31f06c6bd1
OK, adjust the kernel finder one more time to handle the case of a config
...
file that just does "include" GENERIC, and therefore has no "config" line.
It's simplest to assume that "netbsd" will be the result in that case.
Rather than duplicate config(8)'s parser in awk (or something), we should
adjust config to parse the config file and spit out the kernel names, and
then use that to replace this awk script thing.
1999-04-10 04:41:52 +00:00
fair
d023c654fd
Slight tweak to the EXTRA_KERNELS build commands to work around a shell
...
parsing wierdness.
1999-04-08 08:24:44 +00:00
fair
5048fc1b17
NetBSD's very clever kernel build system can make more than one
...
kernel per config file and the resulting kernel need not be named
"netbsd"; therefore paw through the config file after the kernel
builds are done, find them all, and put them where they belong per
release(7). This all done with some clever awk/sh scripting, from
PR 7180 by David Forbes.
1999-04-04 09:57:11 +00:00
fair
2f7a39463f
Create /var/log/aculog with appropriate permissions, per PR 6675
1999-04-03 09:40:38 +00:00
perry
7824e2333c
NO_POSTFIX should have been BUILD_POSTFIX with reversed sense.
1999-03-29 16:40:44 +00:00
simonb
e8d9f12b08
Add a NO_POSTFIX check to allow \'make distribution\' to work.
1999-03-28 21:31:11 +00:00
mrg
3018f8d67b
postfix support.
1999-03-27 05:17:08 +00:00
drochner
d8f89f1b7b
install wscons.conf
1999-03-24 20:12:21 +00:00
drochner
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
scottr
a443f8c15c
Make the includes and install targets consistent, and shove the
...
ugly hack into the etc/Makefile distribution target instead of
the top-level build target. Problem noted by Mycroft.
1999-03-10 19:10:14 +00:00
cjs
34d3f1c35f
Add comment that release is a synonym for snapshot, and make release
...
present everywhere snapshot is.
1999-03-08 02:37:56 +00:00
mycroft
73230d62d0
Only install ld.so.conf on machines where we install ld.aout_so.
1999-03-05 07:21:44 +00:00
itohy
72e04f8dd5
Make "make release" work without US domestic source
...
and with more than one extra kernels.
1999-02-19 05:58:40 +00:00
fair
108440dc7b
The "secr" set is not made by default by maketars; add stuff to
...
make it unless EXPORTABLE_SYSTEM is set.
1999-02-18 19:42:51 +00:00