Add a new explicit `struct proc *p' argument to socreate(), sosend().
Use that argument instead of curproc. Follow-on changes to pass that
argument to socreate(), sosend(), and (*so->so_send)() calls.
These changes reviewed and independently recoded by Matt Thomas.
Changes to soreceive() and (*dom->dom_exernalize() from Matt Thomas:
pass soreceive()'s struct uio* uio->uio_procp to unp_externalize().
Eliminate curproc from unp_externalize. Also, now soreceive() uses
its uio->uio_procp value, pass that same value downward to
((pr->pru_usrreq)() calls for consistency, instead of (struct proc * )0.
Similar changes in sys/nfs to eliminate (most) uses of curproc,
either via the req-> r_procp field of a struct nfsreq *req argument,
or by passing down new explicit struct proc * arguments.
Reviewed by: Matt Thomas, posted to tech-kern.
NB: The (*pr->pru_usrreq)() change should be tested on more (all!) protocols.
hostid of the machine rather than always getting "0". Tested with
hostid(1) from solaris-2.8 and with lmhostid (part of FlexLM) for solaris.
Approved by atatat@.
exec case, as the emulation already has the ability to intercept that
with the e_proc_exec hook. It is the responsability of the emulation to
take appropriaye action about lwp_emuldata in e_proc_exec.
Patch reviewed by Christos.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
so that a specific emulation has the oportunity to filter out some signals.
if sigfilter returns 0, then no signal is sent by kpsignal2().
There is another place where signals can be generated: trapsignal. Since this
function is already an emulation hook, no call to the sigfilter hook was
introduced in trapsignal.
This is needed to emulate the softsignal feature in COMPAT_DARWIN (signals
sent as Mach exception messages)
of the sibling list so that find_stopped_child can be optimised to avoid
traversing the entire sibling list - helps when a process has a lot of
children.
- Modify locking in pfind() and pgfind() to that the caller can rely on the
result being valid, allow caller to request that zombies be findable.
- Rename pfind() to p_find() to ensure we break binary compatibility.
- Remove svr4_pfind since p_find willnow do the job.
- Modify some of the SMP locking of the proc lists - signals are still stuffed.
Welcome to 1.6ZF
file system.
The function vfs_write_suspend stops all new write operations to a file
system, allows any file system modifying system calls already in progress
to complete, then sync's the file system to disk and returns. The
function vfs_write_resume allows the suspended write operations to
complete.
From FreeBSD with slight modifications.
Approved by: Frank van der Linden <fvdl@netbsd.org>
and make the stack and heap non-executable by default. the changes
fall into two basic catagories:
- pmap and trap-handler changes. these are all MD:
= alpha: we already track per-page execute permission with the (software)
PG_EXEC bit, so just have the trap handler pay attention to it.
= i386: use a new GDT segment for %cs for processes that have no
executable mappings above a certain threshold (currently the
bottom of the stack). track per-page execute permission with
the last unused PTE bit.
= powerpc/ibm4xx: just use the hardware exec bit.
= powerpc/oea: we already track per-page exec bits, but the hardware only
implements non-exec mappings at the segment level. so track the
number of executable mappings in each segment and turn on the no-exec
segment bit iff the count is 0. adjust the trap handler to deal.
= sparc (sun4m): fix our use of the hardware protection bits.
fix the trap handler to recognize text faults.
= sparc64: split the existing unified TSB into data and instruction TSBs,
and only load TTEs into the appropriate TSB(s) for the permissions.
fix the trap handler to check for execute permission.
= not yet implemented: amd64, hppa, sh5
- changes in all the emulations that put a signal trampoline on the stack.
instead, we now put the trampoline into a uvm_aobj and map that into
the process separately.
originally from openbsd, adapted for netbsd by me.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
Avoids a lot of casting and removes the need for some line breaks.
Removed a load of (caddr_t) casts from calls to copyin/copyout as well.
(approved by christos - he has a plan to remove caddr_t...)
it checks both the alternative/emul tree, and the non-emul tree.
This makes it possible to run chrooted emulated binaries without need
to setup shadow /emul tree within the chroot hierarchy.
Only tested for COMPAT_LINUX, changes to other compat modules were
mechanical.
Fixes kern/19161 by Christian Groessler.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
memory fault handler. IRIX uses irix_vm_fault, and all other emulation
use NULL, which means to use uvm_fault.
- While we are there, explicitely set to NULL the uninitialized fields in
struct emul: e_fault and e_sysctl on most ports
- e_fault is used by the trap handler, for now only on mips. In order to avoid
intrusive modifications in UVM, the function pointed by e_fault does not
has exactly the same protoype as uvm_fault:
int uvm_fault __P((struct vm_map *, vaddr_t, vm_fault_t, vm_prot_t));
int e_fault __P((struct proc *, vaddr_t, vm_fault_t, vm_prot_t));
- In IRIX share groups, all the VM space is shared, except one page.
This bounds us to have different VM spaces and synchronize modifications
to the VM space accross share group members. We need an IRIX specific hook
to the page fault handler in order to propagate VM space modifications
caused by page faults.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
gets reset properly when the old parent exits before the child. A flag
is set in old parent process when the child is reparented in ptrace(2).
If it's set when process is exiting, all running processes have their
'old parent process' pointer checked and reset if appropriate. Also
change to use 'struct proc *' pointer directly, rather than pid_t.
This fixes security/14444 by David Sainty.
Reviewed by Christos Zoulas.
* struct sigacts gets a new sigact_sigdesc structure, which has the
sigaction and the trampoline/version. Version 0 means "legacy kernel
provided trampoline". Other versions are coordinated with machine-
dependent code in libc.
* sigaction1() grows two more arguments -- the trampoline pointer and
the trampoline version.
* A new __sigaction_sigtramp() system call is provided to register a
trampoline along with a signal handler.
* The handler is no longer passed to sensig() functions. Instead,
sendsig() looks up the handler by peeking in the sigacts for the
process getting the signal (since it has to look in there for the
trampoline anyway).
* Native sendsig() functions now select the appropriate trampoline and
its arguments based on the trampoline version in the sigacts.
Changes to libc to use the new facility will be checked in later. Kernel
version not bumped; we will ride the 1.6C bump made recently.
format specific.
Struct emul has a e_setregs hook back, which points to emulation-specific
setregs function. es_setregs of struct execsw now only points to
optional executable-specific setup function (this is only used for
ECOFF).
is supposed to point directly to struct mbuf or struct sockaddr in kernel
space as appropriate, rather than being a pointer to memory in userland.
This is to be used by compat/* when emulation needs to wrap
send{to|msg}(2)/recv{from|msg}(2) and modify the passed struct
sockaddr.
Async I/O OS specifities should now handled in OS specific code. Linux
has been done, but other emulation should be handled. See case LINUX_F_SETFL
in sys/compat/linux/common/linux_file.c:linux_sys_fcntl() for more details.
The data that has been collected yet:
Net Free Open Linux SunOS AIX OSF1 Darwin
send SIGIO to write end of pipe Y N N N N N Y Y
send SIGIO to read end of pipe Y Y N N N ? Y ?
send SIGIO to write end of socket Y Y Y N N Y Y Y
send SIGIO to read end of socket Y Y Y Y Y ? Y ?
between creation of a file descriptor and close(2) when using kernel
assisted threads. What we do is stick descriptors in the table, but
mark them as "larval". This causes essentially everything to treat
it as a non-existent descriptor, except for fdalloc(), which sees a
filled slot so that it won't (incorrectly) allocate it again. When
a descriptor is fully constructed, the code that has constructed it
marks it as "mature" (which actually clears the "larval" flag), and
things continue to work as normal.
While here, gather all the code that gets a descriptor from the table
into a fd_getfile() function, and call it, rather than having the
same (sometimes incorrect) code copied all over the place.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
* __HAVE_SYSCALL_INTERN. If this is defined, e_syscall is replaced by
e_syscall_intern, which is called at key places in the kernel. This can be
used to set a MD syscall handler pointer. This obsoletes and replaces the
*_HAS_SEPARATED_SYSCALL flags.
* __HAVE_MINIMAL_EMUL. If this is defined, certain (deprecated) elements in
struct emul are omitted.
*_emul_path variables
change macros CHECK_ALT_{CREAT|EXIST} to use that, 'root' doesn't need
to be passed explicitly any more and *_CHECK_ALT_{CREAT|EXIST} are removed
change explicit emul_find() calls in probe functions to get the emulation
path from the checked exec switch entry's emulation
remove no longer needed header files
add e_flags and e_syscall to struct emul; these are unsed and empty for now
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
pk