bouyer
ab971176ac
Alternate UART3 pins a PG6-7, not PG8-9
2016-04-12 10:54:29 +00:00
bouyer
2f53f613b4
x86_lfence() calls mcount(), so inline lfence instructions in mcount
...
helper functions
2016-04-11 14:15:30 +00:00
bouyer
ca03f01a92
__cpu_simple_unlock() is called from _mcount(), so don't call mcount() from
...
__cpu_simple_unlock().
Kernel profiling should work again
2016-04-11 14:14:27 +00:00
christos
d9da07b963
We don't need TRAP_SIGDEBUG
2016-04-10 15:39:27 +00:00
christos
a9a4b283d5
- Turn on ASLR by default
...
- Add PAX_MPROTECT_DEBUG flag
2016-04-10 15:28:24 +00:00
palle
d0242aefce
Rework locking mechanism introduced in rev. 1.21: use __cpu_simple_lock... instead of mutex_... since this causes issues when LOCKDEBUG is defined
2016-04-07 19:46:39 +00:00
macallan
06576a066a
moar registers, less tpyos
2016-04-07 01:00:05 +00:00
mlelstv
234135ea24
Use symbolic constant. No functional change.
2016-04-03 11:04:14 +00:00
mlelstv
7b1a30890f
Add more tags understood by the firmware.
2016-04-03 11:02:17 +00:00
mlelstv
d46fae17f1
Only fix up IPMI on ProLiant Microserver when address if set.
...
Don't assume a specific preconfigured address, just clear the lower bits.
2016-04-03 10:32:00 +00:00
martin
a182d9ea04
Add missing includes
2016-04-03 10:03:34 +00:00
martin
117132e6a6
Adopt to device_t/struct ifnet* changes
2016-04-03 10:03:04 +00:00
martin
9027300348
Use device_t/struct ifnet* for phy callbacks
2016-04-03 10:01:52 +00:00
martin
62078f8320
Fix bpf_mtap argument
2016-04-03 09:58:45 +00:00
martin
044276cb07
Convert # line comments to // line to avoid preprocessor confusion
2016-04-03 09:06:28 +00:00
skrll
b1ee8add7a
PR/51017: VEXPRESS_A15 doesn't compile
...
Don't pretend to be anything other than A15
2016-04-02 08:48:35 +00:00
mlelstv
2232a82848
appease compiler. Fixes options MODULAR build.
2016-04-02 08:16:54 +00:00
palle
0059b91df1
sun4v: Workaround for OpenBoot feature where a 64-bit address is truncated to a 32-bit address. This happends when a write to the console (/virtual-devices@100/console@1) is done. Avoid this by using a static buffer that is mapped below 4GB. Thanks to Tarl Neustaedter for explaining how OpenBoot works. ok martin@
2016-04-01 20:21:45 +00:00
kiyohara
118e184d7f
Ensure enable clocks for omapmputmr.
2016-03-31 14:33:17 +00:00
christos
6952a2b793
PR/51016: David Binderman: comment out pointless code.
2016-03-30 21:16:22 +00:00
christos
40d9145b70
PR/51015: David Binderman: remove useless code
2016-03-30 21:14:54 +00:00
macallan
a3107e02e3
make sure we compile mips_fpu.c and fp.S with -mhard-float
2016-03-29 18:40:32 +00:00
martin
0213dfd655
Add missing include
2016-03-28 10:35:36 +00:00
martin
e002a1e12e
Simplify now that we have an internal toolchain
2016-03-28 10:31:45 +00:00
martin
afad7c48d8
Restrict float format hacks to gcc 4.8
2016-03-28 08:10:57 +00:00
mrg
0fd71d0df7
add a normal kernel that builds with PAE enabled. this is not yet
...
hooked into the normal build, but this is a working configuration
and on my 16GB test system, works fine.
2016-03-27 05:14:14 +00:00
martin
0b2c20760e
Do not touch FP register on softfloat kernels.
2016-03-26 17:40:02 +00:00
martin
0eb7da4d7a
David Binderman in PR port-newsmips/51014:
...
Move initialization of remain_cnt up to the declaration.
XXX the #ifdef here does not make much sense to me, but I know nothing
about the hardware. I'd guess it could be removed or inverted and #error'd
instead.
2016-03-26 17:14:38 +00:00
martin
07a988af43
David Binderman in port-arm/51013: masking of rxbdtlen happened before
...
the value was read - move it down a few lines.
2016-03-26 17:04:03 +00:00
martin
c22389e399
Fix comment
2016-03-26 11:49:10 +00:00
skrll
dc4391d06a
Restore HOST1X and AHB_A2 to pmap_devmap to give pmap less work to do
2016-03-26 09:07:31 +00:00
skrll
3e98a566a4
G/C old structs
2016-03-26 08:42:07 +00:00
nakayama
01ff6a8d1b
Fix probably a typo.
2016-03-25 14:58:53 +00:00
shm
606dc45ebf
Add support for clac and stac instructions.
2016-03-25 10:14:43 +00:00
mrg
4773cc203b
avoid a GCC warning with this:
...
+#if defined(__GNUC__) && (__GNUC__ >= 5) && defined(__OPTIMIZE__)
+ x.fp_sign = 0;
+#endif
(ridiculous, but seems better than disabling the warning entirely.)
2016-03-23 05:25:51 +00:00
mrg
65f5251eae
remove a bunch of "@echo done" from the tail of rules. these messages
...
were vaguely useful back when we didn't run make -j, but now you end
up with a single line "done" every so often, with no idea what it is
for. very few other targets claim they're done so just remove these.
2016-03-22 08:25:22 +00:00
mrg
3495e41469
revert part of rev 1.66 that converted a tri-state variable into
...
a bool while leaving a comparision against "< 3".
2016-03-22 04:48:25 +00:00
gdt
af798e7b27
Disable uscanner in all kernel configs
...
As discussed on current-users@, SANE uses ugen via libusb and not
uscanner, so users are not well served by having uscanner. Consensus
is that addressing how to adjust permissions for scanners should not
block restoring basic functionionality.
(Compile-tested only, but there are multiple reports of this being the
right approach.)
2016-03-19 23:21:02 +00:00
mrg
3ae3bff701
remove some dead code.
2016-03-19 20:57:48 +00:00
martin
a706a41168
Default kernel builds to USE_SSP=yes.
2016-03-19 18:50:25 +00:00
christos
a75799a386
Add PAX_SEGVGUARD disabled.
2016-03-16 16:13:16 +00:00
skrll
b4740b2a71
Update vcprop_tag_clockrate structure
2016-03-14 07:43:00 +00:00
christos
32829346f4
PR/50964: David Binderman: Avoid signed overflow warning
2016-03-13 17:59:20 +00:00
christos
72fae1ce63
Add NO variables for the things that boot block does not support
...
(SSP/PIE/DEBUG/FORTIFY)
2016-03-13 17:48:53 +00:00
christos
f415d76a88
PR/50963: David Binderman: Use kmem_zalloc() so all members are initialized.
2016-03-13 17:38:44 +00:00
tsutsui
af8b911cf4
TAB/space cleanup.
2016-03-13 08:57:10 +00:00
tsutsui
741896a7e0
Misc KNF and ANSIfy.
2016-03-13 08:54:45 +00:00
mrg
8872ffd0f4
remove some more GCC 4.5 code. make GCC 5.3 be HAVE_GCC=53, so that,
...
for example, HAVE_GCC >= 48 works properly.
2016-03-13 01:06:51 +00:00
dholland
32cef18b87
Remove unused variable, found by gcc.
2016-03-12 02:17:05 +00:00
dholland
a9e4e98629
Fix syntax error in previous. Hi christos :-)
...
(PR 50944)
2016-03-12 02:15:50 +00:00
dholland
88c859a1fb
Refine previous so the output is all hex again. followup to PR 50942
2016-03-12 02:13:35 +00:00
jklos
7f15b0acd9
Add kernel configuration file for PogoPlug Pink, PogoPlug Mobile and
...
PogoPlug v4. Add conditional because PogoPlug v4 can't run SD interface at
50 MHz.
2016-03-12 00:41:30 +00:00
christos
c01666f5da
PR/50945: David Binderman: sprinkle parens
2016-03-11 18:31:03 +00:00
christos
c5bd235187
PR/50944: David Binderman: sprinkle parens
2016-03-11 18:29:48 +00:00
christos
a1148110d4
PR/50942: David Binderman: fix printf format
2016-03-11 18:27:37 +00:00
tsutsui
56c764b63d
Properly zero out struct fb_devconfig, including rasops_info.
...
Fix panic after wsconscfg(8) from serial console, caused by
a junk function pointer.
2016-03-11 13:16:55 +00:00
martin
b7bf6f19af
Strip debug symbols from boot code
2016-03-10 20:23:35 +00:00
martin
8d92fc86f0
Deal with _edata not being 4-byte aligned
2016-03-10 20:22:52 +00:00
martin
032d514f64
Add a few includes of bsd.own.mk to avoid broken test conditions
...
on ACTIVE_CC - this might not be the correct fix for PR 50930,
but it avoids the issue.
2016-03-10 09:00:24 +00:00
christos
0a584b1b23
PR/50928: David Binderman: Clarify precedence with parentheses.
2016-03-09 20:11:41 +00:00
nakayama
7cee3f133b
32-bit kernels use 32-bit stack.
2016-03-09 12:20:20 +00:00
skrll
16de05a45e
#if 0 a KASSERT for now as it doesn't apply to Raspberry Pi 3
2016-03-08 08:01:23 +00:00
skrll
2a81ae4e13
Use the nvidia,has-utmi-pad-registers property.
...
From Jared.
2016-03-08 07:49:20 +00:00
christos
8dcf2fd159
Better to panic! Otherwise we end in an endless loop.
2016-03-07 00:28:36 +00:00
christos
d2b754e0c5
Return instead of crashing. This is wrong, and should be fixed properly.
2016-03-07 00:16:48 +00:00
christos
bd45646f1b
Don't throw us in the debugger!
2016-03-07 00:11:33 +00:00
tnn
6815b834d0
Don't try to interpret MIPS3-specific status register bit on MIPS1.
...
Fixes boot of NetBSD/pmax in gxemul 3max emulation mode.
2016-03-06 21:03:01 +00:00
riastradh
566ef8a23e
Revert to disabling nouveau by default in x86 GENERIC.
...
Haven't had time to debug the issues that seem to affect pretty much
everyone. Maybe soon!
2016-03-05 17:08:48 +00:00
mlelstv
2d6e668d26
Don't modify command line buffer but create a copy of the root argument.
2016-03-05 07:33:58 +00:00
palle
80fa20e7c1
sun4v: rft_kernel should pay attention to the number of register windows that can be restored. We cannot rely on fill traps to occur, since sun4v only has two trap levels available in privileged mode. Based on code from OpenBSD. ok martin@
2016-03-03 20:45:45 +00:00
skrll
8142c3d9b6
Get the RPI3 working (in aarch32 mode) by recognising Cortex A53 CPUs.
...
While I'm here add some A57/A72 info as well.
My RPI3 works with FB console - the uart needs some help with its clocks.
2016-03-03 17:01:31 +00:00
christos
179eb6b78f
PR/50881: David Binderman: Remove redundant code.
2016-03-02 19:25:32 +00:00
joerg
a542f58193
Don't reuse LDFLAGS for arguments passed directly to ${LD}, share/mk
...
expects it to be passed to ${CC} or ${CXX}, so they will generally
prefix flags with -Wl.
2016-03-01 16:08:22 +00:00
christos
b2e81b86bb
PR/50868: David Binderman: Fix operator precedence.
2016-02-29 18:25:29 +00:00
christos
3aca3860f9
PR/50869: David Binderman: Use logical and instead of arithmetic
2016-02-29 18:24:31 +00:00
christos
13e9c85cdc
PR/50870: David Binderman: Use logical and instead of arithmetic
2016-02-29 18:22:06 +00:00
christos
4a89ac6a7b
PR/50871: David Binderman: use logical and instead of arithmetic
2016-02-29 18:20:31 +00:00
christos
65cf609744
PR/50854: David Binderman: Remove redundant code.
2016-02-29 15:28:35 +00:00
riastradh
b7a17ef485
Let the compiler decide whether to inline.
...
Works around ICE in PCC for now:
/home/riastradh/netbsd/current/src/sys/arch/x86/x86/cpu_rng.c, line 195: bad xasm node type 23
/home/riastradh/netbsd/current/src/sys/arch/x86/x86/cpu_rng.c, line 195: bad xasm node type 23
internal compiler error: /home/riastradh/netbsd/current/src/sys/arch/x86/x86/cpu_rng.c, line 195
This code is not performance-critical.
2016-02-29 00:17:54 +00:00
joerg
2f6c48363c
Reorder using register_t to the point where it is defined.
2016-02-28 22:19:01 +00:00
riastradh
def0440dfd
KNF. No functional change.
2016-02-28 20:51:03 +00:00
rjs
925bb52c9a
Set sc_dev field of softc.
...
Should pullup to 7.
2016-02-28 19:39:27 +00:00
joerg
daac313960
clang now supports normal soft float.
2016-02-27 21:48:34 +00:00
joerg
a8ff50921f
Ignore unused arguments for clang as we pass assembler flags and the
...
like to the preprocessor-only mode. Conditionalize GCC flags that are
not known to clang accordingly.
2016-02-27 19:26:13 +00:00
joerg
e5174fc3b5
When building with clang, optimise for minimal size and skip frame
...
pointers when possible.
2016-02-27 19:25:08 +00:00
mlelstv
6846a009d9
no condition for cpu_rng here
2016-02-27 15:42:20 +00:00
mlelstv
850f8baca4
add missing cpu_rng.c to kernel
2016-02-27 14:28:50 +00:00
tls
4257ba9cf7
Remove callout-based RNG support in VIA crypto driver; add VIA RNG backend for cpu_rng.
2016-02-27 00:54:59 +00:00
tls
da86e96bef
Add RDSEED and RDRAND backends for cpu_rng on amd64 and i386.
2016-02-27 00:43:55 +00:00
tls
1b1730d0f9
Add cpu_rng, a framework for simple on-CPU random number generators.
2016-02-27 00:09:44 +00:00
christos
2a023ae6f4
PR/50859: David Binderman: Remove redundant code.
2016-02-26 18:19:16 +00:00
christos
256dd10e5c
PR/50858: David Binderman: Remove redundant code.
2016-02-26 18:17:39 +00:00
christos
1f499e21c3
PR/50857: David Binderman: Remove redundant code.
2016-02-26 18:16:51 +00:00
christos
ffddf40726
PR/50856: David Binderman: Remove redundant code.
2016-02-26 18:15:59 +00:00
christos
9aaf0da75d
PR/50855: David Binderman: Remove redundant code.
2016-02-26 18:14:38 +00:00
christos
ebbcb8c3e7
PR/50852: David Binderman: make code more readable (although it was correct
...
anyway)
2016-02-26 18:11:11 +00:00
ryo
cee558c2f4
fix always false comparison.
...
pointed out by joerg@
2016-02-25 13:27:33 +00:00
joerg
73916f4bad
Garbage collect unused variables comcnaddr, comcnspeed and comcnmode.
2016-02-25 12:22:30 +00:00
christos
be0b117468
move the NODEBUG to the boot blocks only.
2016-02-21 14:50:05 +00:00
christos
47160181d3
No debug, pic, or ctf for standalone code.
...
- debug makes things not fit
- ctf is useless
- pic does not work with the function call convention standalone uses
2016-02-21 03:33:18 +00:00