10e25f6012
make default sendmail.cf IPv4-only again.
...
roll sendmail-IPv6.cf, which does IPv4/v6.
2000-05-08 00:37:53 +00:00
ce6e7b1e81
Add tun2 and tun3 to the all target and create the ugen0 devices in the
...
usbs target.
2000-05-07 19:15:21 +00:00
fff5c01493
This was doubly borken...
2000-05-07 19:03:25 +00:00
fe4377f98c
Only warn on non-default old nfsiod args.
2000-05-07 02:04:20 +00:00
d690122a5e
add devices for bktr; also add them to all target
2000-05-07 01:39:27 +00:00
83072a01c7
Since src/gnu/usr.sbin is populated add it to the cdpath.
2000-05-06 13:17:33 +00:00
4157176c27
Added an obj target to ensure that KERNOBJDIR exists - in case
...
we are using MAKEOBJDIRPREFIX.
Fixed the comment about why we grab ../Makefile.inc
2000-05-06 07:52:19 +00:00
5c2de4c3fa
Build INSTALL_SMALL.
2000-05-06 05:31:58 +00:00
13c8f7a2df
check /etc/mail/aliases on check_aliases.
...
/etc/aliases will be checked as well, if exists (for backward compatibility).
2000-05-05 18:28:53 +00:00
6901565540
sync with sendmail 8.10.1 migration. /etc -> etc/mail
...
From: Andrew Brown <atatat@atatdot.net>
2000-05-04 01:07:40 +00:00
78565052f1
do not cope with pre-8.10 configuration file. do not start sendmail.
...
From: hubert
2000-05-03 17:03:10 +00:00
dc09e9637e
xntpd -> ntpd
2000-05-03 14:40:39 +00:00
14e9ff0043
correct typo (sendmail upgrade)
2000-05-03 11:37:16 +00:00
366bbade5a
sync with sendmail upgrade.
...
- sendmail configuration files are in /etc/mail, not /etc.
- src/etc/aliases will be installed into /etc/mail/aliases (confusing)
- rc.d/sendmail warns if /etc/sendmail.cf exists.
2000-05-03 10:55:19 +00:00
94dc65714b
add /etc/mail, which will be used with sendmail 8.10.x.
2000-05-03 09:24:23 +00:00
17424fe1fe
sync with rc.d/network, about IPv6 prefix filters
...
(since we still ship it, we need to make it up-to-date)
2000-05-03 07:04:22 +00:00
45fb67b360
remove/change missleading comments
2000-05-03 00:10:33 +00:00
b09bd0e884
s/xntpd/ntpd/
2000-05-02 16:31:11 +00:00
e5150c9868
Out with the old, in with the new.
2000-05-02 12:19:20 +00:00
dd4d1cfbc2
Change xntpd to ntpd.
2000-05-02 12:17:28 +00:00
dfbbad05df
Use "ntpd.pid" for pid file, change other xntp references to ntp.
2000-05-02 12:16:07 +00:00
0f7d1d56ff
Add a comment about urio.
2000-05-02 12:01:13 +00:00
7eb7e0a9cd
Make urio(4) device node.
2000-05-02 11:59:40 +00:00
f5e35141a6
Remove the never populated /usr/share/doc/xntp, and add /usr/share/doc/html
...
and the ntp4 subdirectories under that.
2000-05-02 11:49:16 +00:00
40ca86f953
Make audio devices.
2000-05-02 08:17:51 +00:00
2e87728bd8
Restructure a bit as to create wscons device nodes using the 'wscons'
...
argument, rather than enumerating all the terminal devices. (Convenient
side-effect: ttyEcfg ist actually created.)
2000-05-02 08:03:38 +00:00
734bcf16ec
Use bsd.kernobj.mk
...
Also if KERNELS_DONE is defined skip building kernels. Handy if re-spinning
due to errors in distrib later on.
2000-05-02 06:41:44 +00:00
0a43d29758
Install the localhost namedb file.
2000-05-01 05:29:34 +00:00
31d7194c3f
Add "make distribution" for Postfix.
2000-04-30 21:45:55 +00:00
816886ef7a
move /usr/share/postfix to /usr/share/examples/postfix. It makes sense
...
to have a /usr/share/sendmail because that directory contains the m4
source file for the .cf file in /etc, but for postfix, it really is
just an example.
2000-04-30 18:10:28 +00:00
0a610ebbd3
use extra_commands= instead of using 2nd argument to run_rc_command
2000-04-30 13:23:04 +00:00
c8ddd6124a
- prefix some more local variables with `_' (when you have a convention,
...
stick to it :-)
- simplify run_rc_script (no need to support fast* or force* here...)
- clarify some comments
2000-04-30 13:16:47 +00:00
3b853f3018
remove /var/run/dmesg.boot before attempting to write to it
2000-04-30 12:39:56 +00:00
32c9a44095
- use checkyesno in $start_precmd and change start_cmd to `postfix start'
...
- use $extra_commands instead of passing "reload" to run_rc_command
2000-04-30 12:21:00 +00:00
0c2e1a2b7e
change run_rc_command() to take the list of extra commands supported
...
from a variable ($extra_commands) as opposed to from $2-* on the
argument list. it's cleaner; and allows for the possibility of
multiple command arguments being passed to run_rc_command() in the
future.
2000-04-30 12:19:07 +00:00
fc2c9714f0
add default alias for postfix pointing to root.
2000-04-30 05:49:10 +00:00
cc7e7b3d7a
Fix raw partition number for cd(4) nodes.
2000-04-29 09:47:01 +00:00
63f94fabf2
Fix the last change so it doesn't fail due too a missing '; then'.
2000-04-29 06:01:08 +00:00
9e96565f2e
pcmcia modems end up at com3 with a GENERIC kernel, so create a tty03 in std
2000-04-29 00:10:37 +00:00
e335e1cd4d
useradd defaults to using the 'users' group, so add one.
2000-04-29 00:09:31 +00:00
b093a1430b
Make ca* devices.
2000-04-28 13:55:04 +00:00
0c5f67f0ac
in check_pidfile and check_process, also match "(" + `basename prog` + ")" .
...
noted by veego@
2000-04-28 01:40:09 +00:00
7a38ab7c44
Don't warn about $hostname not being set if $dhclient == YES; it's quite
...
likely that we'll be getting the hostname via DHCP when it runs.
2000-04-28 00:13:39 +00:00
ebe6c4d40d
Use the stop_cmd to unmount the filesystems with 'umount -a'.
...
This helps to fix the unclean reboots (at least on my system).
2000-04-27 21:00:50 +00:00
c9f5754ee8
You need to add a xxx_precmd with a checkyesno yyy if you use a xxx_cmd
...
in an rc.d script.
2000-04-27 20:58:26 +00:00
9a8415ba0b
Add a bunch of SSL services.
2000-04-26 16:28:17 +00:00
0716b4f382
don't bother checking rc_configured each time run_rc_command executes; once in /etc/rc is enough
2000-04-26 15:06:46 +00:00
fad0a37405
Provide rc.d support for the Postfix mail system. Committed to the
...
base because there is no support for packages in rc.d, and Postfix
is supposed to become part of the base system anyhow.
2000-04-26 05:28:03 +00:00
0316517d36
Make ccd and raidframe provide `disks', and make swap1 and fsck
...
depend on `disks', rather than `ccd' and `raidframe'.
2000-04-26 05:13:51 +00:00
dffc281396
add zone file for "localhost.". this is included in examples in BIND8,
...
and is a good thing to have (no outside DNS server will supply this).
2000-04-26 01:33:27 +00:00
065c791de8
Add skeyaudit to /etc/security (with a variable to disable) per PR 5871
2000-04-24 23:46:37 +00:00
caa2beb10e
revert previous; the fast-start functionality already existed, and
...
works at multi-user boot. (starting /etc/rc after single user boot
doesn't exhibit this fast start behaviour).
2000-04-22 03:01:22 +00:00
3fff16ff47
rtsol is not a daemon. rtsol.d should have been killed by rc.d/rtsold.
...
(correct me if i'm wrong)
2000-04-20 02:12:04 +00:00
f3d36a14e8
Add login.conf, sysctl.conf and usermgmt.conf.
2000-04-20 02:01:52 +00:00
72951fce20
Don't need ()'s around "cd ... && ${MAKE} ...".
2000-04-19 13:45:24 +00:00
5e6480feca
Add an "rc_fastboot" variable check in rc.subr, that if set adds
...
"fast" to the start of the run_rc_command arg.
/etc/rc calls each rc.d script with rc_fastboot=yes so that rc.subr
aware scripts to use "faststart" to skip the process running check.
2000-04-19 04:26:22 +00:00
a596663a81
nfsiod script is gone.
2000-04-16 04:18:51 +00:00
a32696c2de
Death to nfsiod!
...
It is replaced by kernel threads that do the same thing. The number of
kernel threads used is set with the vfs.nfs.iothreads sysctl.
2000-04-15 21:14:48 +00:00
f408de971d
as this script is primarily for compatibility (with people's
...
rc.local), call it in a way that is compatible with the old behaviour:
* remove the stop case
* don't set $1="start" in the start case
xxx: it's debatable if this script should even exist, but i digress ;-)
2000-04-13 00:39:47 +00:00
2665e61925
make `stop' a no-op, so that the network doesn't disappear at an
...
inconvenient time during boot.
this may be fixed a different way in the long term... (not that the old
rc.shutdown supported stopping the network, or could i really see a
practical use for allowing it at this stage, but in the future someone
might want the functionality i've just disabled).
2000-04-11 05:03:24 +00:00
506c359083
Improve backwards compatability and leave securelevel the old way.
2000-04-09 21:00:04 +00:00
163510ecf4
The file /etc/sysctl.conf is now run with sysctl -f at boot time.
...
This replaces the previous /etc/rc.d/sysctl. Also, the variables are now
set earlier, between ipf/ipnat and the network coming up.
The rc.conf defcorename and securelevel variables are no more. You can
set them directly in sysctl.conf now.
2000-04-08 23:02:53 +00:00
93f24178a7
dhclient does not, in fact, require /var/db/dhclient.leases to exist.
2000-04-06 17:19:13 +00:00
dc04b64906
- - Take BUILD_KERNELS to be the kernels to make into sysinstall kernels.
...
- - Clean up.
2000-03-30 03:25:48 +00:00
c4ae664105
Revert last two changes. As pointed out by enami tsugutomo, snap_md_post
...
is the wrong place to do the splits, as the tar files are not yet made!
2000-03-29 23:47:53 +00:00
5c57db66c3
Add comments.
2000-03-29 15:58:42 +00:00
58e9dbb6aa
Mount ext2 fs with kernel on /stand.
2000-03-29 15:58:34 +00:00
129d97f658
routed is live in /sbin, not /usr/sbin. Pointed out by kay@kaynet.or.jp.
2000-03-29 09:09:06 +00:00
aea5721be9
from i386 port revision 1.5 by Tsugutomo Enami:
...
Uncomment out the CD-ROM entry and remove outdated comment for the
reason why it was commented out.
2000-03-29 06:45:35 +00:00
a1e356450f
Uncomment out the CD-ROM entry and remove outdated comment for the
...
reason why it was commented out.
2000-03-29 03:43:32 +00:00
e8b27ae5ed
Check rc_configured also here, and bail out if it isn't set to yes.
2000-03-29 02:13:51 +00:00
630e63cb47
Don't include ${RELEASDIR} in INSTALLATION_DIRS. Error pointed out by
...
Urban Boquist in PR install/9689.
2000-03-28 16:26:30 +00:00
47cd48f3db
Use distrib/sets/Makefile in the release: and new cryptoset: targets.
2000-03-28 00:39:17 +00:00
96b85dc028
set major number of /dev/console to 0 (not 8 (com))
2000-03-27 19:35:25 +00:00
7b0e557100
Build the split sets in place on "make release".
2000-03-26 15:48:22 +00:00
3a640d007a
Add ftpd.conf.
2000-03-24 22:37:48 +00:00
5ce9472a83
NetBSD/cobalt /etc.
2000-03-19 22:10:56 +00:00
0a94c72b0f
correct reject route installations for IPv6. improve comments.
2000-03-17 17:41:01 +00:00
10257beef5
comment fix. it is not mandatory to supply the configuration file,
...
rtadvd(8) can guess the configuration from the routing setups.
2000-03-17 17:35:20 +00:00
174455c38a
fix check for domainname since it can come from /etc/defaultdomain as well as $domainname
2000-03-16 22:22:15 +00:00
d52bc434ce
Device entries for ca(4).
2000-03-16 14:58:09 +00:00
8fbb81c21e
dhclient lives in /sbin, not /usr/sbin
2000-03-15 03:15:47 +00:00
d8a503fec5
Try to make the install floppy work on 4MB machines:
...
- reduce memory disk size
- use x_dd, x_ifconfig and x_route
- use libhack.o (sync with i386)
- don't use mfs as /tmp
Tested by Luigi Filippini <filippini@tiscali.it> and me.
2000-03-13 13:16:54 +00:00
52462864b7
ssh script removed, so remove sshd=NO line
2000-03-13 05:07:15 +00:00
0059d641e5
* replace daemon, login, servers with DAEMON, LOGIN, SERVERS
...
* remove sshd (it was from my private system)
2000-03-13 04:03:52 +00:00
028706d573
Add wsmux0 and wsmux1.
2000-03-12 13:58:14 +00:00
deaf45edc1
disallow packets to malicious 6to4 prefix, based on
...
http://playground.iijlab.net/i-d/draft-itojun-ipv6-transition-abuse-00.txt
2000-03-12 04:21:26 +00:00
5d18d90843
Rearrange so the ouput of this is a bit more cosmetic.
2000-03-12 03:49:36 +00:00
292a9f03be
Since we have an "sshd" script in rc.d, we should have an "sshd" knob
...
in rc.conf.
2000-03-12 03:49:11 +00:00
bfa0f14ea6
Fix the network_stop function so it doesn't fails due to missing ]['s.
2000-03-11 20:13:42 +00:00
0cc5873563
Add raidframe to the REQUIRE list. rcorder seems to get it right, but it
...
is better to add it.
2000-03-11 20:12:22 +00:00
b869270297
Don't start rc.wscons with an start/stop argument. Disable stop and add an
...
checkyesno check.
2000-03-11 20:11:16 +00:00
84807b9933
Add missing checkyesno's.
2000-03-11 20:10:21 +00:00
aacfec2af3
mountd requires mountall.
2000-03-11 17:29:50 +00:00
5fa9d50bcd
add missing callunit.
...
fix ucbsnd.
2000-03-11 07:45:31 +00:00
738b8e9986
oops, pppd doesn't require /etc/ppp/options now.
2000-03-10 20:21:57 +00:00
a59fb6d3bc
forgot to add /etc/ppp/options to special(5)
2000-03-10 20:02:46 +00:00
47cab3ac18
create /etc/ppp when building install sets
...
add this and a lot of files not previously looked at in special(5)
2000-03-10 20:01:50 +00:00
c595577502
if checkyesno do_rcshutdown, run scripts in /etc/rc.d/* in the
...
reverse order returned by rcorder
2000-03-10 13:17:25 +00:00
8f8c6d6b2a
run scripts in /etc/rc.d/* in the order returned by rcorder
2000-03-10 13:15:58 +00:00
d2fc7332ae
add /etc/rc.d
2000-03-10 12:04:43 +00:00
c132a440d2
install rc.d scripts
2000-03-10 11:59:35 +00:00
c53094a738
rc.d scripts derived from /etc/rc
2000-03-10 11:53:23 +00:00
6096ea59cd
* add:
...
check_pidfile parse a pidfile for a pid, checking that the
process is running, and print the matching pid
check_process print a list of running pids that match the procname
run_rc_command kitchen sink function to simplify creation of
rc.d scripts
run_rc_script invoke an rc.d script appropriately
rc_usage print a usage string for an rc.d script
err similar to err(3)
warn similar to warn(3)
* add copyright
* remove islocalfs(); nothing uses it
2000-03-10 11:39:27 +00:00
dfa4c86f40
Correct cd* minor number.
2000-03-07 18:24:16 +00:00
327c7e4af9
add lm0 to 'all' target
2000-03-07 17:55:06 +00:00
020a8ac5b2
make clearing of /tmp after reboot configurable (default on), as per recent
...
discussion on current-users
2000-03-07 14:33:13 +00:00
72f77e9fb3
Build the miniroot, too, when building the release.
2000-03-06 21:54:05 +00:00
f61a38f7f7
Add "ta=4.2BSD" to floppy A partition + some other small fixes.
...
From Todd Whitesel.
2000-03-04 16:11:35 +00:00
24c978b1d5
Add "floppy" target.
2000-03-04 15:46:08 +00:00
8c8afb18a9
add TX39 internal UART and UCB1200 audio device.
2000-03-04 15:02:44 +00:00
9fbb1fd9b4
Add /usr/share/man/{cat,man}8/arc
2000-03-03 20:34:17 +00:00
2b9070c1d9
to make binary snapshot
2000-03-03 12:56:05 +00:00
9e721e2455
Don't use grep to find if we have fdesc mounted. case is faster and
...
works without having /usr mounted.
2000-03-01 19:03:17 +00:00
89c2906ea5
explicitly allow writable directories when rebuilding the alias
...
database, otherwise this will fail if any directory in ${DESTDIR} is
g+w.
2000-03-01 16:48:35 +00:00
627898817e
sync with etc/namedb change (IPv6 loopback reverse database file)
2000-03-01 11:21:13 +00:00
ca7ee807d5
change filename for IPv6 loopback address (::1).
...
many found it ugly, and I found that I've made a mistake in old name.
there needs to be 4 more "0"s!
this commit renames
etc/namedb/0000:0000:0000:0000:0000:0000:000 into etc/namedb/loopback.v6.
(based on recent discussion I did not use cvsmove)
2000-03-01 11:06:27 +00:00
ab5e19cc9f
Make /dev/usb, a node where USB events can be read.
...
Also add ttyU to hpcmips.
2000-02-29 19:07:41 +00:00
66ee7c2e15
No need to make audio devices twice in all.
2000-02-29 18:48:05 +00:00
37eb9eebc2
Initial import prep port.
2000-02-29 15:21:20 +00:00
f539e10ff8
enable IPv6 ftp and telnet by default.
...
it makes more sense to me as we have INET6 in kernel, and we have ftp4/telnet4
enabled by default. maybe I'm biased:-)
2000-02-28 17:25:42 +00:00
24d8e4f798
added share/locale/pt_BR/LC_MESSAGES for grep 2.4
2000-02-27 01:27:48 +00:00
f4665e12b2
Install a blank sendmail.st here.
2000-02-26 18:42:31 +00:00
6009529bb4
Remove extra `;' in md* entry.
2000-02-26 05:39:51 +00:00
bd10f55368
Nuke an extra ;; introduced by md* fix.
2000-02-26 04:43:27 +00:00
a41f67cc02
Add `lm*' for LM7[89] hardware monitor
2000-02-25 02:35:49 +00:00
a23763688e
Make MI SCSI device ready. For now MAKEDEV all won't create them.
2000-02-22 03:57:38 +00:00
a59987f569
Let the main Makefile deal with building kernels.
2000-02-20 03:52:22 +00:00
01b2f6e1de
Sum the floppy directory, too.
2000-02-20 03:38:04 +00:00
ad78992969
Always checksum binary/kernel, now that there is at least one file in it.
2000-02-20 03:32:37 +00:00
58895df429
Clean up a bit.
2000-02-20 03:11:12 +00:00
f10265540b
Always install GENERIC in the kernels directory.
2000-02-20 03:10:50 +00:00
4bf1c78bfb
Make the tset stuff actually set the environment variables again.
...
Someone was on crack.
2000-02-19 19:00:13 +00:00
b24c03aa71
Simplify the tset crap, and do not set $HOME gratuitously.
2000-02-19 18:39:01 +00:00
4316d096db
1.) bring over the second half of David Brownlee's change to dot.login --
...
don't query the user for terminal type if the type is not `unknown'
2.) change this a little in both the csh and the [k]sh cases -- do call
tset(1) even if the terminal type is known (so that TERMCAP is set
properly, but don't have it query the user.
2000-02-16 03:07:09 +00:00
8d796b1774
Port to [k]sh(1) startup files David Brownlee's improvement from
...
cvs rdiff -r1.4 -r1.5 basesrc/etc/root/dot.login
As there, text is from Miles Nordin.
2000-02-16 02:02:02 +00:00
6d39fee74c
Only display the 'use su' message in the non 'su -' case.
...
Update the 'use su' message (text from Miles Nordin).
If the terminal type is !unknown, do not prompt for it.
2000-02-15 19:29:54 +00:00
aae51fbc36
Check for CRYPTOPATH variable instead of "../domestic" when deciding to build the secr set.
2000-02-14 18:37:39 +00:00
29cb4c7412
Merge wscons work onto the main development branch.
2000-02-14 07:12:34 +00:00
a3aa7fe66f
add ip6defaultif configuration variable in rc.conf, for configuring
...
default outgoing interface for IPv6 host when default router list is empty.
the configuration is just for very rare case. it is safe to leave it empty.
2000-02-13 07:47:26 +00:00
c45bb5af35
change console terminal type from 'unknown' to 'vt100'.
2000-02-12 13:46:54 +00:00
e70542be3a
fix comment in "imap" line to honor IMAP4.
...
IMAP2 (RFC1176): Interactive Mail Access Protocol
IMAP3 (RFC1203): Interactive Mail Access Protocol
IMAP4 (RFC1730): Internet Message Access Protocol
2000-02-12 04:02:33 +00:00
15f0d67b67
improve comments about /etc/ifconfig.xxN, /etc/ifaliases, $ifaliases_xxN.
2000-02-11 08:09:56 +00:00
a89dc9b12d
add two symbolic name for tcp/udp port 143: "imap" and "imap4".
...
at least without "imap", fetchmail chokes.
2000-02-10 18:20:56 +00:00
810e380c89
Oops, I've forgotten to commit this on Jan 21.
...
>- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
>- now raw partitions are used for memory disk ioctls
2000-02-10 16:45:37 +00:00
94bfb48ec9
add missing semi-colon
2000-02-09 22:23:32 +00:00
7a0d226970
ip6forwarding -> ip6mode change (somehow i forgot to commit...)
...
PR: 9375
2000-02-09 16:24:03 +00:00
b32545eabf
add tcp6 lines for rshd/rlogind.
2000-02-09 11:05:04 +00:00
c089f6c69a
"sendmail" is in "src/gnu/usr.sbin/sendmail" now.
2000-02-09 08:15:12 +00:00
bb08aa94ac
add ./usr/share/man/{man3,cat3}/atari
2000-02-07 17:48:52 +00:00
itojun