848e8406bc
The fe driver is spilt into ate, fmv and mbe, and this file is no longer
...
necessary.
1998-04-03 04:46:46 +00:00
910e6420e0
Delete entry for fe*.
1998-04-03 04:44:39 +00:00
f7fc870789
Add entry for aic* at isapnp, but comment outed.
1998-04-03 04:35:39 +00:00
6821ff25c2
Add entry for aic* at isapnp.
1998-04-03 04:35:05 +00:00
6223459801
Add entry for mbe* at pcmcia (but comment outed).
1998-04-03 04:29:52 +00:00
c95ab20c4a
Add entry for mbe* at pcmcia.
1998-04-03 04:29:13 +00:00
078370be30
Add comment outed entries for ate0 and fmv0.
...
Remove fe0.
1998-04-03 04:25:15 +00:00
b1b3597d5e
Add entries for ate0 and fmv0 (former is tested but latter is not).
...
Remove fe0.
1998-04-03 04:23:50 +00:00
3d26c2dbf1
In cpu_fork() if the vmspace is shared don't fiddle with it. e.g. don't
...
try and replace the zero page pagetable and mapping.
1998-04-03 01:58:40 +00:00
d6fb052cdd
Setup proc0.p_addr much earlier on in the startup.
1998-04-03 01:56:34 +00:00
eb466ba47f
Make sure to unload and recycle the DMA map for a bad received packet.
...
This was (indirectly) the reason for machines `hanging' (actually, looping in
tulip_rx_intr()) with de cards.
1998-04-02 13:49:32 +00:00
a1079109bf
Substitute `unsigned int' for `u_int'. Also, don't pollute name space with
...
INFTIM in case of _XOPEN_SOURCE.
1998-04-02 13:22:09 +00:00
0d0f2a0713
kill unnecessary (unused) definition of partab (char partab[];), which
...
caused a compiler warning with egcs.
1998-04-02 02:46:02 +00:00
27af7137f4
Overhaulled cpu_reboot(). Junked all the boot action garbage and just use
...
howto to dictate what operations to perform.
Removed support for calling the deprecated kshell stuff.
1998-04-02 02:01:13 +00:00
ac4c80ec10
Include machine/asm.h and use the ENTRY() macro for all function entry
...
points.
1998-04-01 23:14:21 +00:00
90a05fec98
Tidied up various comments. Use the function entry macros from asm.h for
...
all entry points and don't bother profiling cpu_reset().
Flush the I and D TLB's after turning the MMU and cache off in cpu_reset().
1998-04-01 23:12:32 +00:00
b2286e384a
Include machine/asm.h and use the macros from there for declaring
...
the function entry points.
Removed some redundant .req statements.
1998-04-01 23:09:06 +00:00
a877b68db5
Don't include sys/device.h here.
1998-04-01 23:05:28 +00:00
f0393b3819
Remove a chunk of dead comments as they appears in disassem.c where
...
they make a lot more sense.
1998-04-01 23:04:16 +00:00
4a96466f61
Remove redundant .req assembler statements.
1998-04-01 23:02:32 +00:00
eb81ac0bbc
Remove a load of redundant .req statements.
1998-04-01 23:00:13 +00:00
ae5c857ba4
Remove redundant .req statements.
...
Make various entry points non-profiling.
1998-04-01 22:59:25 +00:00
fd18f1a45b
Remove some redundant .req statements.
1998-04-01 22:55:45 +00:00
077c15ab4d
Remove some redundant .req statements.
...
Make various entry points non-profiling.
1998-04-01 22:55:05 +00:00
268d889d0d
Make the floppy_read_fiq and floppy_write_fiq entry points non-profiling.
1998-04-01 22:53:32 +00:00
7f98e08105
Remove some redundant .req statements.
1998-04-01 22:52:24 +00:00
f4c5b8f91a
Define profiling and non-profiling versions of the ENTRY and ASENTRY
...
macros. No extra profiling code is generated if profiling is turned
on yet, but get the structure ready. (from cgd).
1998-04-01 22:50:22 +00:00
f9463514bf
Implement Congestion Window Monitoring as described in the TCPIMPL
...
meeting of IETF #41 by Amy Hughes <ahughes@isi.edu>, and in an upcoming
internet draft from Hughes, Touch, and Heidemann.
CWM eliminates line-rate bursts after idle periods by counting pending
(unacknowledged) packets and limiting the congestion window to the
initial congestion window plus the pending packet count. This has the
effect of allowing us to use the window as long as we continue to transmit,
but as soon as we stop transmitting, we go back to a slow-start (also known
as `use it or lose it').
This is not enabled by default. You can enable this behavior by patching
the "tcp_cwm" global (set it to non-zero) or by building a kernel with the
TCP_CWM option.
1998-04-01 22:15:52 +00:00
39b4c2fece
mmap() default MAP_SHARED/MAP_PRIVATE is ``DEBUG'', not ``DIAGNOSTIC''
1998-04-01 21:43:52 +00:00
437796f42a
Move initialization of `proc0.p_addr' from cpu_startup() to bootstrap().
1998-04-01 14:03:26 +00:00
1b176d9395
Back out a change made some time ago, that would cause the NetBSD TCP
...
to ACK immediately any packet that arrived with PSH set. This breaks
delayed ACKs in a few specific common cases that delayed ACKs were
supposed to help, and ends up not making much (if any) difference in
the case where where this ACK-on-PSH change was supposed to help.
Per discussion with several members of the TCPIMPL and TCPSAT IETF
working groups.
1998-03-31 23:44:09 +00:00
2da6c91259
Fix a potential-congestion case in the larger initial congestion window
...
code, as clarified in the TCPIMPL WG meeting at IETF #41 : If the SYN
(active open) or SYN,ACK (passive open) was retransmitted, the initial
congestion window for the first slow start of that connection must be
one segment.
1998-03-31 22:49:09 +00:00
84ada512a7
Add the newly created bus_space.c so it gets compiled.
1998-03-31 22:09:28 +00:00
763a681898
Accommodate cgsix bus-attach split.
1998-03-31 21:12:15 +00:00
e3e74bd0d5
Factor out bus code into separate files.
1998-03-31 21:05:04 +00:00
d850158a7e
Garbage-collect pmax_boardtype. Remoe pmaxtype.h includes from TC
...
framebuffer code. Elsewhere, use systype.
1998-03-31 11:32:52 +00:00
e485e43d44
Add writebuffer-flush for Decstation 5400, 5100 which use
...
coprocessor 3 for writebuffer control.
1998-03-31 11:04:10 +00:00
88d943c976
Add emtpy entries for unused systypes between 5400 (0x6) and 5500 (0xb)
1998-03-31 11:00:01 +00:00
b80d5a851b
Rearrange the conditions checked regarding the inclusions for <sys/types.h>
...
and <sys/ttydefaults.h>. Actually, one might argue about the inclusion of the
former, since the X/Open synopsis of tcgetsid() states that <termios.h> is
the only header file required, but the <termios.h> definition neither mandates
the definition of pid_t nor permits the inclusion of <sys/types.h>.
1998-03-31 10:05:59 +00:00
e9ca6a9081
Remove conditionals on PCVT_{NET,FREE}BSD to make the source easier to
...
read.
1998-03-31 08:22:13 +00:00
7e74fb627d
Allow this to work w/ UVM (API issue).
1998-03-31 08:18:33 +00:00
8c33969680
Fix PR # kern/68 by ensuring that a PC has a valid mapping before attempting
...
to disassemble it.
1998-03-31 08:16:28 +00:00
5c85ae8778
Don't establish the interrupt handler just to read the MAC address.
1998-03-31 08:13:34 +00:00
4fe1e7a83d
Make main() return int to shut up egcs. (Yuck.)
1998-03-31 05:29:21 +00:00
9eb2927bec
free correct page in incomplete section of MNN, as pointed
...
out by Soren S. Jorvang.
1998-03-31 03:04:59 +00:00
28b0f7408b
Make this compile again after the changes to the tty subsystem.
1998-03-30 20:10:26 +00:00
57f61ecbbd
Modify TK50 check to also check for a TZ30 tape, and adjust the modesense
...
data length accordingly.
1998-03-30 19:50:47 +00:00
05bb5a1d2f
revert back to 1.28
1998-03-30 17:52:03 +00:00
fe4846acdc
have ddb show map print resident page count
1998-03-30 17:34:58 +00:00
be4108fec1
Replace direct `sparc_bus_map()' calls with bus space map method.
1998-03-30 14:21:38 +00:00
enami