14b98cd440
Add uaudio driver.
1999-09-09 12:33:43 +00:00
0ec90c839f
resync supported mii phy's with GENERIC
1999-09-01 03:10:04 +00:00
b99d7572d6
Add some missing usb glue.
1999-09-01 00:05:01 +00:00
c068ef8152
Add `umass'.
1999-08-29 16:55:48 +00:00
db574ba708
Add umodem device.
1999-08-16 22:27:08 +00:00
333c98b6e2
Add the AdvanSys SCSI boards.
1999-08-07 07:40:40 +00:00
a7cd454b1d
It's time to be COMPAT_14.
1999-07-29 10:37:12 +00:00
b0947ec27d
Turn on EV6 bits: Tsunami and system type 6600.
1999-06-29 07:04:15 +00:00
f6b3b14ce3
enable COMPAT_OSF1
1999-04-30 23:33:41 +00:00
aa1e5724b9
WSEMUL_SUN -> WSEMUL_VT100
1999-04-29 01:28:40 +00:00
f927176889
Add internal 3com PHYs for the ex driver.
1999-02-22 07:44:50 +00:00
bd72e4386f
Add floppy controller and drives.
1999-02-18 20:39:04 +00:00
6fe2522d57
second round of mouse renaming: psm->pms
1999-01-23 16:10:47 +00:00
d2f4d39a08
wskbd, not wskbs.
1999-01-10 22:51:46 +00:00
cd93f8dfc9
- Add adv and adw SCSI controllers, commented out, as they do not yet
...
work.
- Add USB stuff.
- Add new pcscp SCSI driver.
- Comment out wss driver, as the configuration listed hangs some systems
cold.
1999-01-06 23:42:27 +00:00
182b5b1d68
Sync with various options in GENERIC that were not added/changed here.
1998-11-25 18:37:48 +00:00
495a4bdb2c
Sync with new IDE support (e.g. pciide changes)
1998-10-14 18:31:34 +00:00
38cae9f204
Replace TAB just after the keyword `options' with SPACE.
1998-09-02 02:02:33 +00:00
88a83f13de
Back out previous.
1998-07-27 18:27:08 +00:00
6ebd8cf4e3
Comment out cs device. Kernels don't compile because there is no
...
cfattach structure found. Leave it to the author to untangle.
1998-07-27 18:02:02 +00:00
b0b64545e8
Add cs* at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:57:56 +00:00
efee8aedfa
If GENERIC has SCSIVERBOSE on, having it off here makes no sense
1998-07-02 23:36:59 +00:00
02b767eee5
Take a stab at EB66 support. An EB66 is basically an EB64+ with a
...
21066 LCA instead of a 21064 + APECS.
1998-06-27 10:10:51 +00:00
0131c651bd
Add DEC_1000A, per GENERIC.
1998-06-26 05:43:21 +00:00
78d7f07efd
Very preliminary support for the Tadpole/DEC AlphaBook. These are basically
...
AXPpci33 machines + power management and a Cirrus PCI-PCMCIA controller.
There is currently no support for the power management facilities, and
the PCI-PCMCIA controller driver needs some work, but this should boot
and run from disk.
1998-06-26 05:42:34 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
cbaedc8675
Support for the Digital Personal Workstation [456]xx, a.k.a. Miata (systype
...
DEC_550). Mostly cloned from the EB164 systype, with some modifications
from myself, and a few more from Andrew Gellatin.
1998-06-05 02:13:41 +00:00
9f5797ac1d
turn on Essential HIPPI for these configurations
1998-06-03 21:16:28 +00:00
7022024d4a
Add epic* at pci?
1998-06-02 01:43:33 +00:00
3b9e9634fb
- Change the tcds child locator from "slot" to "chip", making it look less
...
like a TurboChannel locator, and more like what is actually going on.
- Allow tcds and asc children of tcds to be cloned.
1998-05-24 23:45:29 +00:00
326f8183dc
No need to hard-code the mcclock offset on the gbus; gbus is direct-config.
1998-05-13 22:03:07 +00:00
6f3b521cd5
Whitespace sanity.
1998-04-24 18:18:41 +00:00
2b6154a68c
Add PCI IDE.
1998-04-18 01:19:40 +00:00
b7c6c315ea
convert to new wscons
...
(pcppi->pckbc, pms->psm, wscons->wsdisplay)
1998-04-15 21:19:21 +00:00
4fa71d82a5
add Alpha 4100 support
1998-04-15 00:46:57 +00:00
3786a63843
1. Always link at the high address, now that we can use free ram below
...
the kernel on most platforms, including all of the entry-level platforms.
2. Kill the comments and options for load address selection.
3. Kill the default -g.
1998-03-25 02:16:41 +00:00
6e6e2d7ebf
Dump maxusers to 32.
1998-03-12 06:04:31 +00:00
2c12105cda
Remove comment which says that fxp is untested (it is known to work now).
...
Also, make model name closer to what driver prints startup.
1998-02-13 04:33:30 +00:00
86adfd8033
Switch to MI IDE drivers, add ATAPI devices.
1998-01-15 07:17:19 +00:00
b52361ff54
add missing COMPAT_13 that kleink putzed
1997-11-30 23:18:59 +00:00
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
f29df68cd4
comment out rnd, mark as experimental
1997-10-20 18:47:08 +00:00
0e4e4777f8
Add pseudo-device rnd.
1997-10-13 06:59:58 +00:00
613ee19c60
Add DDB.
1997-09-06 02:04:18 +00:00
ce0a826c55
fix various bogons: copy SCSIVERBOSE option (still commented out) and ISA lc
...
driver to ALPHA. Also, sort them into their respective lists correctly,
rather than punting completely (SCSIVERBOSE), or mis-sorting(!) (lc).
1997-08-24 06:40:18 +00:00
1173f77359
fix spaces/tabs lossage: if we're going to do "options<space><tab>", be
...
consistent about it (fix it in all files)! Also, there's no point at all
in doing "file-system<space><tab>", so kill the spaces.
1997-08-24 06:37:12 +00:00
332ad95e76
Change the MI audio driver so it attaches to the MD driver in the
...
normal way. This requires adding a line to the config files to
get audio to work again.
1997-08-19 23:49:33 +00:00
6d4fa106d1
Move satlink0 to ALPHA.
1997-07-13 21:24:14 +00:00
dacadc3aff
Add the ext2fs file system.
1997-06-13 00:44:13 +00:00
1258c8d25b
remove now obsolete "swap on..." lines.
1997-06-12 18:41:58 +00:00
augustss