563aff8153
Add a 'chain' command in interactive mode that allows you to vary the
...
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
1999-05-03 09:45:01 +00:00
6a2c64449b
Sanity check the drive number in %dl and use it instead of blindly
...
assuming disk 0.
1999-05-02 13:48:30 +00:00
7d18a1432b
Tighten check for bad drive numbers to avoid passing garbage to the
...
2nd stage loader.
1999-05-02 12:20:01 +00:00
c0042f7871
Because of space constraints, error messages got shortened. Reflect this
...
in the manual page.
1999-05-02 12:18:40 +00:00
cbf8e59c01
Make check if we need int13 extensions for the bootselector more correct.
1999-05-02 12:17:48 +00:00
5a48cda98a
Remove confusing entry about cylinder boundaries.
1999-05-02 12:17:13 +00:00
255793452f
Since fdisk/mbr contains a man page, we need to descend into it regardless
...
of which ${MACHINE} we are.
1999-05-02 04:42:47 +00:00
69741f8d3d
Fix typo.
1999-05-01 20:04:14 +00:00
855480012b
Invert the meaning of -s, from "don't load symbols" to "load symbols".
...
Document that this is expensive (and why) in the BUGS section.
1999-04-30 18:32:01 +00:00
8eeaf82ae4
- Use the proper multiply instructions so that we don't get truncated.
...
- Fix comparison, which did not work before.
1999-04-30 15:29:44 +00:00
e8dacca7c3
STRICT_ALIGNMENT only applies to the start of partitions, not length.
1999-04-30 04:46:50 +00:00
144e7d3345
Remove duplicate paragraph. Closes PR/7498 by Geoff C. Wing.
1999-04-29 21:53:08 +00:00
e312a3c208
Fix disklabel -t to work with disks that don't end on a cylinder. Before it
...
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.
Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
1999-04-29 19:12:07 +00:00
a6f7895b92
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.
Change the mbr manualpage to reflect some shorter error messages.
1999-04-28 23:27:01 +00:00
2969961420
Allow partitions to extend to the end of the disk, even when
...
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
1999-04-26 02:05:46 +00:00
ae3b9e217c
add a -D line to usage().
1999-04-26 01:02:25 +00:00
4a22f0e03d
Fix entry point parsing if output file specified to modload (PR7352)
1999-04-23 17:47:02 +00:00
6d094b5b76
Copy code across from newfs so that 'fsck sd0a' and similar will work.
1999-04-22 04:20:53 +00:00
fb524f3e3b
one-line copyright message
1999-04-17 17:55:13 +00:00
48c1c25ba5
Make the bootselector configurable by fdisk. Add a -B flag to this
...
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
1999-04-17 01:38:00 +00:00
6299fb0813
Correct nokerninfo tty flag being left set in most error cases.
...
Closes PR/7388 by Dave Huang <khym@bga.com>.
1999-04-17 01:17:15 +00:00
8b4801d18a
change wording slightly.
1999-04-16 23:56:22 +00:00
8920adf7b2
add lmcctl.8
1999-04-16 23:40:52 +00:00
7adcf112ca
Add a manual page describing the MBR and the bootselector.
1999-04-15 22:35:19 +00:00
fa9bff9be1
Add and build a bootselecting MBR (i386).
1999-04-15 22:31:23 +00:00
e524714ca8
Update for sparc64.
1999-04-09 16:01:34 +00:00
de8c37eadc
Update a pasto-ed comment.
1999-04-09 16:00:17 +00:00
3cf54e49e9
If checklabel() failed, the label has not been written, so exit(1).
1999-04-09 10:06:18 +00:00
51ec106561
Plug a file descriptor leak.
1999-04-09 07:29:43 +00:00
d55756227f
!silent -> verbose, to make it compile again (there is no "silent")
1999-04-08 19:19:57 +00:00
92003e043a
If there is no /etc/ld.so.conf, it is not a fatal error. Correct the return
...
value from the function so that the exit value to the shell is correct.
1999-04-08 13:27:38 +00:00
1cd395375d
1, 2, 3 and.. 4!
1999-04-06 20:24:37 +00:00
b22750720f
change:
...
.Sh "SEE ALSO"
to:
.Sh SEE ALSO
The doc macros check for the latter (actually just for 'SEE' as the first
argument to .Sh) to set the section header SEE ALSO flag, which modifies
some behaviour (e.g. references done with .Rs/.Re).
1999-04-06 04:54:19 +00:00
9164307eaf
instead of coding an alpha boot block checksum routine here, use
...
the macro now provided by disklabel.h
1999-04-05 02:50:52 +00:00
8d5d550e54
Define __POOL_EXPOSE for this nlist-groveling program.
1999-04-01 09:12:21 +00:00
20a608fe88
revert the previous changes that removed special cased ioctls for ISO
...
stuff.
1999-04-01 08:12:23 +00:00
f9daa9044a
Correct data checksum to take ifile indirect block into account, if it exists
1999-03-30 19:04:50 +00:00
479f35bc93
Make the usage string match the man page.
1999-03-30 17:32:44 +00:00
efffe046a2
Move COPTS to CPPFLAGS. Nuke some no-longer needed compile options.
1999-03-26 00:46:05 +00:00
c2408285ae
Nuke unused code.
1999-03-26 00:45:01 +00:00
6b8114413a
Enable lmcctl
1999-03-25 04:08:29 +00:00
07c2411233
Add lmcctl, to configure lmc driver. Reason it belongs in /sbin is that
...
it might need to be run before /usr is mounted.
1999-03-25 04:05:36 +00:00
22f9ed8d9b
Make it work for both elf and a.out
1999-03-24 16:02:41 +00:00
68d6f4bf44
Remove spurious .ne's.
1999-03-24 06:27:49 +00:00
66902a3cfd
Remove blank lines.
1999-03-24 06:14:18 +00:00
210c7f5748
printf format fixes for Alpha.
1999-03-24 05:32:23 +00:00
491d912f59
Implement a read cache, as announced on tech-userlevel. Default is 32k
...
read buffer size, 512 buffer or 15% of the user memory. Can be changed
with the -k and -s options.
1999-03-23 14:22:59 +00:00
cc2c568d66
Revert cast to (int) that caused core-dumps.
1999-03-22 10:25:23 +00:00
9dbddb5d81
Add "-l" to "SYNOPSIS" section and use same order as "slattach" when
...
printing command line usage.
1999-03-19 21:18:32 +00:00
d5c144cf97
"LFS" really stands for "Log-*structured* File System"
1999-03-19 17:29:44 +00:00
14c9d1eedb
Fixes for newfs_lfs on partitions that would require writing an indirect
...
block on the Ifile (>~4Gb with standard block/segment size).
1999-03-19 17:28:19 +00:00
8ca743b6f3
Goodbye: newlfs
...
Hello: newfs_lfs, fsck_lfs
1999-03-18 21:54:47 +00:00
0a849c918b
Change name of newlfs to newfs_lfs.
1999-03-18 17:18:04 +00:00
9f7f3ce5d6
wrong order of initializations fixed
1999-03-18 07:14:53 +00:00
369e9cadf8
Initial checkin of fsck_lfs. This version cannot do any repair (-p flag
...
does nothing, and one of -p or -n is required) but can be useful as a
diagnostic tool.
1999-03-18 02:02:18 +00:00
f2c170eda0
Modify newfs so that the root node (and lost+found dir, if created)
...
of the new fs has uid.gid equal to the euid.egid of the process
which made it. This change permits users who have write access to
a device (say a floppy) to create a filesystem that, when mounted,
they have write access to.
This change closes PR bin/5990 from jbernard@ox.mines.edu , and is also the
change requested in PR bin/6276 from "Charles M. Hannum" <mycroft@netbsd.org>
1999-03-16 21:52:34 +00:00
d6f9f0986b
Remove some extra spaces.
1999-03-15 23:20:23 +00:00
988bdf8e19
Modify how the byteswapping of the cylinder summaries is handled. If we
...
need to swap, allocate a buffer for the swapped summaries rather than using
writebuf. The latter is fixed at 64k, which is only enough room to hold
4096 summaries. Creating an fs with more results in a buffer overrun.
First noted by Matt Jacob mjacob@netbsd.org , and fixed by Albeaus
Bayucan, bayucan@nas.nasa.gov . Minor mods by me.
1999-03-11 20:23:58 +00:00
fa45851f9b
Add missing .El line.
1999-03-10 05:14:51 +00:00
97bbd0e85a
Changes corresponding to new kernel LFS. Changed default block/frag sizes
...
to 8k/1k. Allow the possibility of writing larger filesystems by writing
the on-inode indirect block of the Ifile.
1999-03-10 00:43:33 +00:00
95086b8941
Add missing .El
1999-03-10 00:08:33 +00:00
1746034b3e
Handle "nodump" flag on directories, by not dumping any files or directories
...
under it. Based on some parts of PR 6705 by Brian Grayson.
In the Makefile, add (commented out) debug options that can be turned on.
1999-03-09 17:25:52 +00:00
4656cdfb18
Add a [-n] option, which allows to examine a fs without altering it.
...
Add a 'blks' command, which lists the blocks address of a file.
1999-03-09 16:11:47 +00:00
79b9ef47d2
Don't bother doing stddev calculation when n==1, since that results in
...
a computation of 0.0/0.0.
On IEEE systems you get a NaN from this; non-IEEE systems probably
give you a SIGFPE.
1999-03-08 01:16:20 +00:00
f6590b22cd
Clean up SYNOPSIS formatting.
1999-03-07 11:02:05 +00:00
17ab98299b
Fix minor formatting error.
1999-03-06 11:57:20 +00:00
4300219122
Fix minor formatting error.
1999-03-06 11:51:48 +00:00
f4609c553d
Typo fixed
1999-03-04 03:03:15 +00:00
4c1c1b0439
Slightly more useful error messages
1999-03-04 03:02:43 +00:00
53d349a107
Update for recent changes: component labels, clean bits, adding hot
...
spares, and rebuilding components in-place. Re-arrange the
letters/options to make more sense (and make better use of the alphabet).
1999-03-02 03:13:59 +00:00
91d6272def
flags and type are seperate now
1999-02-28 17:42:37 +00:00
c805ae93c2
Crash dumps should *not* be world readable.
1999-02-27 20:40:30 +00:00
bce8ed1c8e
Once more around the hickory shrub. Faster and simpler stddev calculation from
...
Bill Studenmund.
1999-02-25 19:07:15 +00:00
c650920100
LP64 tweaks.
1999-02-25 11:03:22 +00:00
57f33ecab4
LP64 tweak in printf(3) instance
1999-02-25 10:56:47 +00:00
1b92119539
Fix calculation of standard deviation. From Brian C. Grayson <bgrayson@orac.ece.utexas.edu>
1999-02-25 03:35:34 +00:00
12711b010a
Add code from Daniel Hagerty <hag@ai.mit.edu> to print standard deviation
...
when printing out final statistics line.
Closes PR bin/6198
1999-02-24 19:31:38 +00:00
d3c740d725
Code to check if a cooked device was specified was failing even if the
...
cooked device was opened successfully. Also fix a typo.
Fixes second part of PR bin/6883 for Soren S. Jorvang <soren@t.dk>
1999-02-24 18:51:39 +00:00
14fe747212
Code to check for cooked device names was failing even if it succeeded in
...
opening the cooked device. Also some typos.
Fixes part of PR bin/6883 from Soren S. Jorvang.
1999-02-24 18:49:14 +00:00
ae9b468dbe
Clean things up a bit. Teach raidctl a little about component labels
...
and hot-adding of spares. New code is there, but not enabled (yet).
1999-02-24 00:03:12 +00:00
bdadd56346
add a new fstab type "dp" for the user-specified dump device.
...
change swapctl -A to see this and add it via swapctl(2). also
add a new swapctl -D <device> to change the dump device on the
fly.
1999-02-23 17:00:53 +00:00
ca98b383fd
Oops remove WARNS=1
1999-02-23 10:51:53 +00:00
756b1291db
Resolve conflicts.
1999-02-23 10:47:39 +00:00
9a58d580cd
Add note about LD_PRELOAD
1999-02-22 23:07:16 +00:00
73b35dd2b4
fix typo
1999-02-18 07:54:33 +00:00
1bb2b4dd78
Properly handle FIFO (linux seems to puts something in the block addr fields
...
here) and a new field that can be different in the master superblock and
its first copy. From Tim Shepard.
1999-02-17 13:11:19 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
9a8b75daeb
add BeOS entry, from URA Hiroshi, PR 6974
1999-02-09 19:11:46 +00:00
4a3cd0cce2
Make quoted strings work. (don't set the high bit of each character)
1999-02-09 08:55:24 +00:00
f0a4bb6818
Use the drive parameter from the partition table
...
to support booting from the second disk.
1999-02-08 21:52:43 +00:00
0c92f24ea3
Numbers 0..9 must be treated as keysyms depending on context. Allow
...
`unknown_%d' for keysym with value `%d' so wsconsctl may read its own
output. Closes PR 6888.
1999-02-08 11:08:23 +00:00
67b7e0e590
Do not create more then LFS_MAXNUMSB superblocks.
...
Do not modify superblock fields after computing its checksum.
Write the last two superblocks to disk, too.
1999-02-04 22:47:48 +00:00
b86771c393
Use off_t where appropriate. Mostly from PR 5257 by Kazushi (Jam) Marukawa.
1999-02-04 22:25:22 +00:00
068fe3dab2
Add missing NetBSD RCS ID's! Thanks to SAITOH Masanobu (msaitoh@netbsd.org)
...
for pointing this out.
1999-02-04 14:50:31 +00:00
521469b010
Xref wscons wsconscfg wsfontload
1999-02-03 21:05:14 +00:00
62b7296fa5
Eliminate unused period.
1999-02-01 23:43:43 +00:00
c3d84360ae
Check malloc's return value before using the pointer.
1999-02-01 15:20:14 +00:00
507f116754
s/.Ic/.Cm/
1999-01-31 02:56:39 +00:00
0287662346
Add the ldconfig SUBDIR for all platforms so ldconfig(8) is available on
...
a shared /usr/share directory.
src/sbin/ldconfig/Makefile has allready an check to build the ldconfig
programm only on a.out platforms.
1999-01-30 21:16:33 +00:00
00e131aa47
Fix some roff bugs.
...
We should use 'Ic' for internal command.
1999-01-30 10:22:45 +00:00
christos