e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
37132adf3f
Sync. with news68k/news68k/mem.c:1.2.
2000-03-10 16:28:56 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
077b93be1a
According to Takeshi Nakayama <tn@catvmics.ne.jp>,
...
POW_ALARMSW seems always 1 on some models (at least XVI).
2000-02-20 16:18:51 +00:00
5903e181fa
Nuke NKMEMCLUSTERS.
2000-02-12 03:29:18 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
8759daabe7
Sync.
2000-02-05 14:35:41 +00:00
b4f060a0bc
Mark LFS partitions as "BSD lfs ".
...
Now, swap partition should be "BSD swap" unless COMPAT_14.
2000-02-05 07:38:10 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
f77befbc84
#define __HAVE_DEVICE_REGISTER on ports that have it, and check for
...
that, rather than a list of architecture defines, in config_attach
2000-02-01 04:01:19 +00:00
b0fbaa33fb
Remove obsoleted macros.
2000-01-26 09:44:10 +00:00
8eb798e603
define a "BUS_SPACE_MAP_PREFETCHABLE" flag which basically means that
...
device accesses are idempotent (but should not be cached by the CPU)
2000-01-25 22:13:17 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
7b49d242ce
Clean up the machine symlink stuff ever so slightly. Needs to be
...
standardized between files.
2000-01-23 17:04:03 +00:00
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
87e1b0f9b7
Add overlay to kernel configs.
2000-01-20 19:12:28 +00:00
a0397a2573
Move callout initialization to a single location; no need to duplicate
...
that code all over the place.
2000-01-19 20:05:30 +00:00
e61f177ab1
STRIP -> STRIPPROG
2000-01-19 16:29:54 +00:00
644b514c39
Change STRIPFLAGS=-g for cross-toolchains.
2000-01-19 14:44:58 +00:00
0b9af6bdce
check whether tv_usec >= 1000000
2000-01-19 02:52:16 +00:00
c4e802b942
Use b_cylinder as defined in sys/buf.h
2000-01-18 19:52:21 +00:00
9a0577db94
Wrong () balance in dumpsize calculation.
2000-01-17 16:17:32 +00:00
2a71e2c15e
Minor cleanups & corrections.
2000-01-16 14:20:54 +00:00
49f79ab628
Change physseg allocation strategy to VM_PSTRAT_BIGFIRST.
...
Required when big (>64MB) high memory is installed.
2000-01-15 14:47:25 +00:00
cf055ef630
Change the implementation of ms(4) polling to use timeout(9) software
...
interrupt in order to eliminate glitches on MPU interrupt levels.
I don't know whether this is a good solution, but it does work.
2000-01-14 08:22:42 +00:00
dbb0c078a5
- Do not lower interrupt level at clock interrupt.
...
The original code lowers level 6 to 4, and if a
clock interrupt occurs in splzs (or similar) the
system may be in unpredictable state.
To do such a hack correctly, checking the original priority
and duplicated clock interrupts would be required.
For now, just disable the hack.
- Do not use clock interrupt for ms polling.
2000-01-14 08:21:22 +00:00
58b3ac77bd
Give up support of 4MB RAM machines for standard sysinst-based installer.
...
Restricted small installer must be used on those machines.
1999-12-24 17:02:13 +00:00
7330ce45ef
Replace shell script version of newdisk utility with C version.
...
Add the man page newdisk(8).
1999-12-24 16:51:24 +00:00
11e6c54cfc
C99: Define a NAN macro in <math.h> which evaulates to a constant expression of
...
a single-precision quiet NaN; only to be defined on platforms that do support
this value.
1999-12-23 10:15:05 +00:00
63604fe51b
Add pseudo-device pty. sysinst does use ptys.
1999-12-05 15:40:17 +00:00
26e1b45757
clrnd()/clbase() discarding.
1999-12-05 11:56:30 +00:00
0513268399
CL* discarding.
1999-12-04 21:13:19 +00:00
169af5c51b
Add a dummy read just after enabling receiver interrupt.
...
If the receiver already has datum, no further arrival of
data is possible and no interrupts will occur.
This change fixes problem that pressing key during boot
may sometimes disable the keyboard.
Remove unreferenced variable "in" in kbdcngetc().
1999-12-03 00:14:06 +00:00
14ed33e42e
Fix typo (&& -> &).
1999-11-28 20:30:57 +00:00
bf013a4539
Remove ether+ driver. Requested by msaitoh.
1999-11-27 15:57:17 +00:00
df61f0409e
From the 68040 User Manual, page 4-10:
...
"To fully support self-modifying code in any situation, it is imperative that
a CPUSHA intrcution is executed before the execution of the first self-modified
instruction. The CPUSHA instruction has the effect of ensuring that there is
no stale data iin memory, the pipeline is flushed, and instruction prefetches
are repeated and taken from external memory."
I verified that this is the only way (I can think of) to make the sigtramp
regression test work on 68040. doing cpushl dc; cinvl ic; over the affected
address range, then nop (to synchronize the pipeline) is not enough; apparently
the nop does not FLUSH the pipeline and prefetch...
Note that the 68060 UM has copied the above cited passage, but in fact this is
not true. This might be connected to the fact that the 68060 does ensure
memory access order under most conditions.
1999-11-25 20:30:38 +00:00
c48182e1ae
Add missing `major' entries: md and fd.
1999-11-23 14:17:09 +00:00
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
3e16beaf22
Add a bunch of "__attribute__((__packed__))"s
...
to get along with the ELF compiler.
1999-11-22 01:14:55 +00:00
e9a0023b37
bring in content of GENERIC.v6 into GENERIC.
...
remove GENERIC.v6 file (as it is part of GENERIC now).
"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.
if you have problem compiling with INET6 on archs I do not have access to,
please contact me.
XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 14:00:37 +00:00
7be83cbb7c
Oops, I misspelt a macro name.
1999-11-19 03:54:08 +00:00
e8a82e3d7e
Do not reset SCSI bus.
1999-11-18 15:03:03 +00:00
8ae197322f
Sync w/ GENERIC (options SOFTDEP).
...
Add IPv6 options to ALL.
1999-11-18 14:09:40 +00:00
b799f7bb46
Remove MAPPEDCOPY (somewhat buggy?).
1999-11-18 14:08:24 +00:00
02ebc9e4d4
Support conversion from ELF, as well as from a.out.
1999-11-16 00:48:11 +00:00
8bec119fcc
Add commented out option SOFTDEP to all GENERIC kernels.
1999-11-15 19:10:44 +00:00
d116707af0
Add
...
prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix
to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".
1999-11-15 19:00:25 +00:00
1a29be4d0c
Increase ramdisk size.
1999-11-13 14:19:46 +00:00
1946167939
Update for pmap_enter() API change. No functional difference.
1999-11-13 00:30:26 +00:00
de6b762004
Make X680x0 IOCS library build on ELF toolchain.
1999-11-11 08:16:20 +00:00
59c36c2cb6
Make Human68k DOS library build on ELF toolchain.
1999-11-11 08:14:43 +00:00
fcc45340da
Make it build on ELF toolchain.
1999-11-11 08:12:50 +00:00
1c2019b5a8
Rip protection against multiple inclusion from wrapper headers.
1999-11-09 21:34:03 +00:00
cef3e31058
Fix the problem that single-step tracing of a trap instruction
...
drops the system into kernel debugger.
1999-10-26 00:20:34 +00:00
e6c88a7686
Update for SCSIPI changes.
1999-09-30 22:59:52 +00:00
8da8dfb94f
Could not compile w/ options M68060.
...
Supply -m68030 and -m68851 to the assembler.
1999-09-24 15:31:52 +00:00
75c422ec6c
Use m68k common cacheops.c.
1999-09-23 15:24:34 +00:00
be7984a052
First step toward network boot.
...
By Takeshi Nakayama <tn@catvmics.ne.jp>.
1999-09-23 15:14:57 +00:00
536a2060af
Protect some declarations by #ifdef _KERNEL.
1999-09-23 15:06:37 +00:00
11cae42531
Centralize the declaration and clearing of `cold'.
1999-09-17 19:59:35 +00:00
15a7aff6f8
Sync (hp300).
1999-09-16 14:40:21 +00:00
da2dab0c10
Finish PMAP_NEW.
...
- Wrong argument to pmap_kremove (vm_machdep.c:pagemove()).
- Uninitialized variable (pmap.c:pmap_kremove <- this should be fixed long ago...)
1999-09-16 14:35:42 +00:00
3b01d1b872
Rename the machine-dependent autoconfiguration entry point `cpu_configure()',
...
and rename config_init() to configure() and call cpu_configure() from there.
1999-09-15 18:10:33 +00:00
f3a668ed84
eliminate the PMAP_NEW option by making it required for all ports.
...
ports which previously had no support for PMAP_NEW now implement
the pmap_k* interfaces as wrappers around the non-k versions.
1999-09-12 01:16:55 +00:00
c3e1f6741d
A foolish consistency.
1999-08-30 18:58:01 +00:00
06a92524c2
Include <sys/bswap.h> for function prototypes. i386, pc532 and vax
...
still include <machine/byte_swap.h> and define macros for some of
the bswap*() functions.
1999-08-21 05:39:51 +00:00
28fb7c1eb8
Define cpu_number() as discussed on tech-smp.
1999-08-10 21:08:05 +00:00
eb20bbc780
Change the semantics of splsoftclock() to be like other spl*() functions,
...
that is priority is rasied. Add a new spllowersoftclock() to provide the
atomic drop-to-softclock semantics that the old splsoftclock() provided,
and update calls accordingly.
This fixes a problem with using the "rnd" pseudo-device from within
interrupt context to extract random data (e.g. from within the softnet
interrupt) where doing so would incorrectly unblock interrupts (causing
all sorts of lossage).
XXX 4 platforms do not have priority-raising capability: newsmips, sparc,
XXX sparc64, and VAX. This platforms still have this bug until their
XXX spl*() functions are fixed.
1999-08-05 18:08:08 +00:00
e89db1c459
Make use of _C_LABEL and other macros in m68k/asm.h.
1999-08-05 15:58:17 +00:00
74431c5ae2
IPv6 options from GENERIC.v6.
1999-08-05 15:05:56 +00:00
e0a8602baf
Install kernel should not require COMPAT_14.
1999-08-05 15:05:11 +00:00
e684a9ad5b
Sync.
1999-08-05 15:04:38 +00:00
6489500f0a
Make sure the branch target of the delay loop is aligned to a cache
...
half-line (8-byte) boundary. Inspired by a discussion w/ Scott Reynolds.
1999-08-01 21:43:04 +00:00
a7cd454b1d
It's time to be COMPAT_14.
1999-07-29 10:37:12 +00:00
5d4686cb63
Fix typo in comment.
1999-07-29 08:19:55 +00:00
f886376518
be more efficient when doing the SYSTEM_LD_TAIL for -g kernels: don't
...
copy them just to strip them, use strip -o.
1999-07-26 05:20:44 +00:00
41cc9a0eb8
enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
...
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!
1999-07-20 07:40:34 +00:00
0945bf58b0
Add examples for including the kernel crypto bits from either crypto-us
...
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.
1999-07-09 18:55:33 +00:00
ecdad0ec33
clean up a bit after jason :)
...
- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.
this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)
1999-07-09 09:52:55 +00:00
3ebbe095e0
Change the pmap_extract() interface to:
...
boolean_t pmap_extract(pmap_t, vaddr_t, paddr_t *);
This makes it possible for the pmap to map physical address 0.
1999-07-08 18:05:21 +00:00
c4d8d19db9
pseudo-device -> defpseudo, per grammar change in config(8).
1999-07-07 00:05:28 +00:00
15a60b5359
Enable mboot.
1999-07-04 04:39:12 +00:00
208ba460f2
SCSI primary boot program and its installer.
1999-07-04 04:38:54 +00:00
5effafcaa6
kernel configuration for IPv6/IPsec. should be in GENERIC in the future.
...
(source code will be committed soon)
1999-07-01 07:00:12 +00:00
6895a21734
Correct imbalance #if.
1999-06-28 15:35:04 +00:00
427639cdce
- Call ip6intr if INET6 is defined.
...
- remove "need-flag" for mac68k esp driver, as it is not used in anywhere
and conflicts with IPsec ESP header.
This should be the only MD change in IPv6 support, except kernel config file.
Very sorry if you have any compilation problem with it (I believe it is okay).
If your favorite arch is not included in here, please add a
call to ip6intr() from softintr handle.
1999-06-28 08:20:40 +00:00
1330797741
Restore scroll registers after X server exits.
1999-06-27 14:14:30 +00:00
c88662958f
include sys/resourcevar.h to be compiled.
1999-06-27 14:13:14 +00:00
b749d34eb9
I forgot to commit this.
1999-06-23 15:20:36 +00:00
170b78e476
Reduce TLB operations.
1999-06-18 14:27:09 +00:00
9e9f068f43
Add the guts of mlockall(MCL_FUTURE). This requires that a process's
...
"memlock" resource limit to uvm_mmap(). Update all calls accordingly.
1999-06-18 05:13:45 +00:00
0288ffb53a
pmap_change_wiring() -> pmap_unwire().
1999-06-17 19:23:20 +00:00
f5a527bb4e
Remove pmap_pageable(); no pmap implements it, and it is not really useful,
...
because pmap_enter()/pmap_change_wiring() (soon to be pmap_unwire())
communicate the information in greater detail.
1999-06-17 18:21:21 +00:00
602d8e81f7
Don't (ab)use uvm_map_pageable() to allocate PT pages. Instead, do
...
some internal reference counting on PT pages. We still allocate them
with the page fault routine (a wire-fault, now), but no longer free
PT pages from pmap_pageable().
1999-06-15 22:18:07 +00:00
cd06c07723
Check file open mode at ioctl.
...
Add debug option SRAM_DEBUG_DONTDOIT.
1999-06-15 15:04:56 +00:00
2c35c7bd03
Only declare block major numbers for devices which can be the root device.
1999-06-07 20:31:27 +00:00
d76e7b8c6d
Don't pass a nam2blk around at all; just have setroot() and friends reference
...
dev_name2blk[] directly. Addresses PR #7622 (ITOH Yasufumi), although
in a different way.
1999-06-07 20:16:08 +00:00
bb1f24c221
Could not be compiled without PMAP_NEW.
1999-06-03 14:43:33 +00:00
db782f7c11
First attempt to implement PMAP_NEW interface.
...
The code was mostly written before the pmap_k* inconsistency fixes.
Work around might still remain. Should be removed.
1999-05-31 14:39:13 +00:00
beb8d06638
Generally update the comment above vunmapbuf().
1999-05-26 22:19:33 +00:00
a2d06a4721
Generally update the comment above the vmapbuf() implementations.
1999-05-26 22:07:36 +00:00
2580d306ab
Change the vm_map's "entries_pageable" member to a r/o flags member, which
...
has PAGEABLE and INTRSAFE flags. PAGEABLE now really means "pageable",
not "allocate vm_map_entry's from non-static pool", so update all map
creations to reflect that. INTRSAFE maps are maps that are used in
interrupt context (e.g. kmem_map, mb_map), and thus use the static
map entry pool (XXX as does kernel_map, for now). This will eventually
change now these maps are locked, as well.
1999-05-26 19:16:28 +00:00
5832084eaf
bus_dmamem_map() maps DMA safe memory, which is usually one or more
...
managed pages, into KVA space. Since the pages are managed, we should
use pmap_enter(), not pmap_kenter_pa().
Also, when entering the mappings, enter with an access_type of
VM_PROT_READ | VM_PROT_WRITE. We do this for a couple of reasons:
(1) On systems that have H/W mod/ref attributes, the hardware
may not be able to track mod/ref done by a bus master.
(2) On systems that have to do mod/ref emulation, this prevents
a mod/ref page fault from potentially happening while in an
interrupt context, which can be problematic.
This latter change is fairly important if we ever want to be able to
transfer DMA-safe memory pages to anonymous memory objects; we will need
to know that the pages are modified, or else data could be lost!
Note that while the pages are unowned (i.e. "just DMA-safe memory pages"),
they won't consume any swap resources, as the mappings are wired, and
the pages aren't on the active or inactive queues.
1999-05-25 23:14:03 +00:00
f4316c1145
Tribial optimizations.
1999-05-21 15:32:38 +00:00
1567b0074d
Sync GENERIC.
1999-05-21 15:15:33 +00:00
fcb74cccfa
Remove experimental/buggy options.
1999-05-21 15:08:27 +00:00
e4a87aa1a9
* convert to using MI allocsys(). most ports were using an MD allocsys(),
...
although a couple still used the old pre-4.4-lite (?) mechanism.
* use format_bytes() to format the various printf()s that print out memory sizes
1999-05-20 08:21:42 +00:00
6e67e063ff
Disable on-chip cache for PT and ST pages for '060 stability.
1999-05-19 14:06:59 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
7a50b38cbd
- Adjust descriptive comment of cpu_fork() which returns nothing and
...
returns once.
- Minor fixes in mips/vm_machdep.c.
1999-05-14 02:11:59 +00:00
c10a926030
Allow the caller to specify a stack for the child process. If NULL,
...
the child inherits the stack pointer from the parent (traditional
behavior). Like the signal stack, the stack area is secified as
a low address and a size; machine-dependent code accounts for stack
direction.
This is required for clone(2).
1999-05-13 21:58:32 +00:00
d1954679df
Missing #if for 060.
1999-05-13 14:24:27 +00:00
40594d5dfa
060 is much faster than Chuck thought according to Ken Midorikawa
...
<k-mid@msg.biglobe.ne.jp>
Print both the core clock and the bus clock on 040/060 machines.
1999-05-13 14:23:42 +00:00
6290fed1b6
SVR4-related typo in previous.
1999-05-06 14:16:07 +00:00
db3bdbe86c
Shut up gcc -Wall.
1999-05-05 14:31:16 +00:00
ad762a0b97
Use mvme68k-derived delay routine.
...
Now that we support various models, the old constant-loop delay routine
may cause problems.
1999-05-05 13:46:20 +00:00
3fe3e5261b
Add missing ia_size argument.
1999-05-05 13:41:44 +00:00
7cebd447fb
Move config_console to ensure that it is always called.
1999-05-05 13:41:19 +00:00
63a9944d93
mem_exists was called with wrong 2nd argument.
...
Because of this, >12MB high memory was not detected.
1999-05-05 13:38:51 +00:00
ef6e15ad0e
Include opt_compat_sunos.h
1999-04-30 16:50:44 +00:00
ed3c676245
Branch address was wrong.
1999-04-30 15:31:18 +00:00
e1529b8f93
Pull in the right generic m68k header. (Where was my mind?)
1999-04-29 14:38:39 +00:00
ab5806d4b8
Message cosmetics.
1999-04-28 16:17:42 +00:00
ea485e0d51
Handle fpunimp properly for fpu_emulate.
1999-04-28 16:16:58 +00:00
b8073b401b
Garbage-collect the VM_MBUF_SIZE constant. Instead, use the size
...
(nmbclusters * mclbytes), so that the right amount of KVA space is
allocated if those variables are patched.
1999-04-26 22:46:44 +00:00
5d8b1ef3e4
g/c REAL_CLISTS.
1999-04-25 02:56:26 +00:00
43d6c498cc
I deleted a necessary line by mistake.
1999-04-22 16:22:49 +00:00
f9afee1b29
Bus error occurred on such machines without the SCSI ROM.
...
Insert badaddr() check before read the ROM.
1999-04-22 12:55:53 +00:00
05b971dd5f
in pmap_pageable(), rather than marking a PT page as not modified
...
to trick the pagedaemon into freeing it later, just unmap the page
and free it immediately. fixes PR 7337.
1999-04-22 04:24:52 +00:00
ed74932033
Add COMPAT_SVR4 for m68k.
1999-04-19 21:22:56 +00:00
35d1114201
Add missing par0.
1999-04-18 15:43:21 +00:00
26b74e1082
Handle T_ILLINST in kernel mode.
...
This occurs in fpu_probe() when the FPU is not installed on the system.
Because of this, FPU_EMULATE wouldn't work at all.
1999-04-18 14:39:10 +00:00
4fcf23e9b0
Handle F line emulation correctly when FPU_EMULATE is enabled.
1999-04-18 14:37:09 +00:00
8eb1fd77e9
Do not memcpy to the bouncebuffer in datain.
1999-04-18 00:38:58 +00:00
bb2c24d761
More size hacks. We can now run the installer on 4MB machines.
1999-04-14 14:13:11 +00:00
c12f6d6d4b
Reduce the kernel size.
...
- Disable many options and devices which is not required to install.
- Decrease the MINIROOTSIZE to fit with the actual embedded image.
1999-04-12 16:11:53 +00:00
f455dd6596
add a `flags' argument to uvm_pagealloc_strat().
...
define a flag UVM_PGA_USERESERVE to allow non-kernel object
allocations to use pages from the reserve.
use the new flag for allocations in pmap modules.
1999-04-11 04:04:04 +00:00
6733198ebd
Fix the startup message.
...
attach_hook is now called without "mdX: " prefix.
1999-04-09 15:41:15 +00:00
eb2c78dd2d
Typo.
1999-04-01 14:11:21 +00:00
967b8c433c
Don't call configure() from cpu_startup().
1999-04-01 00:17:45 +00:00
35b6e71f52
Enable rnd.
1999-03-31 15:38:32 +00:00
004b01c5ba
Some trivial size reductions.
1999-03-31 15:38:06 +00:00
tron