lukem
49d132729c
these are *way* out of date...
1997-08-22 12:24:25 +00:00
lukem
3554ac334d
* use $0 instead of MAKEDEV
...
* remove devices before mknod-ing them
* use ${i#...} and $((...)) instead of `eval ...`
* tz* has perms 660 root.operator (instead of 666 root.wheel)
* consolidate a few devices into one case, with internal switching
for the slight difference (usually unit name and major number)
* reset the umask after MAKEDEV.local
* don't treat ttyv* specially - it's an i386-ism
1997-08-22 12:16:28 +00:00
lukem
b790d7bce9
ttyv* shouldn't be treated specially on the hp300 (it's an i386-ism)
1997-08-22 12:06:27 +00:00
lukem
d4a3164363
ttyv* shouldn't be treated specially on the alpha (it's an i386-ism)
1997-08-22 12:04:03 +00:00
lukem
607e11fb8a
* add enss* to ss*
...
* st* has perms 660 not 640
* use $0 instead of MAKEDEV
* reset umask after MAKEDEV.local
1997-08-22 11:34:30 +00:00
lukem
cdfa15cb5b
* st* has perms 660 not 640
...
* add enss* to ss*
* invoke MAKEDEV.local as $0.local, and reset the umask afterwards
1997-08-22 11:30:57 +00:00
lukem
fcbf94775b
* add enss* to ss*
...
* st* has perms 660 not 640
* invoke MAKEDEV.local as $0.local, and reset umask afterwards
1997-08-22 11:26:01 +00:00
lukem
5629b8d007
* st* and wt* have perms 660 instead of 640
...
* add enss* to ss*
* invoke MAKEDEV.local as $0.local
* reset umask to 077 after running MAKEDEV.local
* warn on unknown devices
1997-08-22 11:19:43 +00:00
lukem
81cdcf7570
* use $0 instead of MAKEDEV
...
* set ct* mt* and st* to root.operator 660 (not root.wheel 666)
1997-08-22 11:10:42 +00:00
lukem
1d665a7616
* use $0 instead of MAKEDEV
...
* remove superfluous umasks
* st* perms are 660 not 640
* ensure md0 and rfd0c get the correct perms
* add enss* to ss*
1997-08-22 10:55:18 +00:00
lukem
3e16910ca2
remove enss* before we try & mknod it
1997-08-22 10:46:27 +00:00
lukem
7cb2956f2d
* st* has perms 660 not 640
...
* add enss* to ss*
* md* is root.operator 640 not root.wheel 600
* use ${i#...} instead of `expr ...`
* use 'sh $0.local' not 'sh MAKEDEV.local'
* warn on invalid devices
1997-08-22 10:41:17 +00:00
lukem
93f6aeeee8
use 'sh $0 ...' instead of 'sh MAKEDEV ...'
1997-08-22 10:32:28 +00:00
lukem
fca196598f
* use $((...)) not expr ...
...
* st* has perms 660 not 640
* use $0 not MAKEDEV
* add enss* to ss*
* remove superfluous use of umask
* ensure umask is reset after running MAKEDEV.local
1997-08-22 10:28:06 +00:00
lukem
237c80a5db
* set perms on st* to 660 not 640
...
* remove superfluous umask
1997-08-22 10:14:45 +00:00
lukem
89fa41e9da
- correct use of generated temporary files.
...
- clean up comments and generated output.
- clean up $SECUREDIR if SIGINT or SIGQUIT received.
- .rhosts may have to be world readable in NFS environments, so allow it to be.
- update list of disks to check for reasonable permissions
- don't show differences in /etc/master.passwd, as the encrypted strings may
be sent. From reading comments earlier in the script, this was the intention
anyway. Fix from Jim Bernard <jbernard@tater.mines.edu> in [security/3994].
- when checking /etc/ftpusers, skip comment lines and only match full
usernames.
XXX: this should be enhanced to check lines of the enhanced ftpusers format.
1997-08-22 09:40:17 +00:00
agc
44579dfa67
Remove the uname=man lines as NetBSD doesn't seem to have a user called
...
man.
Add NetBSD RCS Id.
1997-08-20 15:41:11 +00:00
agc
51e120ae5a
Import FreeBSD's etc/mtree/BSD.local.dist as etc/mtree/BSD.pkg.dist.
...
This is for use with the FreeBSD ports system.
1997-08-20 15:23:33 +00:00
mikel
71d389d416
include hostname in subject of email with results of running *ly
...
scripts; from Jim Bernard in PR misc/3996
1997-08-20 07:18:41 +00:00
veego
94c1e883f6
Added missing en$name$unit entry for the chmod command in ss*).
...
Noticed by Luke Mewburn on tech-security.
1997-08-19 18:39:56 +00:00
lukem
a563ca4687
As per [bin/1814] from Arne Juul <arnej@imf.unit.no>, and discussions
...
with matt green <mrg@netbsd.org> (to shut up /etc/security)
* set ingres account shell to /sbin/nologin
* set ~daemon to / (not /root)
1997-08-19 15:07:12 +00:00
lukem
67087092d4
remove incorrect vn* entry, as vnd* exists and vn* doesn't work anyway
1997-08-19 13:33:04 +00:00
lukem
0f26a04544
* ensure that check for '.' in root's $PATH doesn't yield a false positive.
...
fix from Jim Bernard <jbernard@tater.mines.edu> in [security/3995]
* detect empty :: elements as '.' in a sh(1) path (leading :, trailing :,
or ::)
1997-08-19 12:08:35 +00:00
augustss
912c4ee11f
Create /dev/audioctl and allow creation of multiple audio devices.
1997-08-18 21:23:12 +00:00
cjs
d10a9ab09b
Move ntpdate before `starting network daemons' to get cleaner output
...
during boot. Besides, it's not a daemon anyway.
1997-08-05 03:32:51 +00:00
lukem
edbafa0300
4.4BSD has the ability to automagially add a route to localhost from
...
an interface to first time its address is referenced. Therefore:
* configure lo0 before all other interfaces (rather than afterwards).
* don't explicitly add a route from `hostname` to localhost
1997-08-04 06:09:49 +00:00
perry
e77a6f04d3
Finally finish fixing pr-230 by assigning minor+8 and minor+16 device
...
names for the lower density minor dev numbers. My shell code would
even work for a wt1 device, but I would seriously pity anyone trying
to get two of these things to work on one machine. Heck, no one should
even try to use ONE wt device.
1997-08-04 03:50:26 +00:00
perry
2a376043c7
add apmd to /etc/rc and /etc/rc.conf per Lennart Augstsson in pr 3313
1997-08-03 22:24:20 +00:00
leo
b9906e7600
Use DISKUNIT macro to encode md's unit in the minor number.
1997-08-01 19:38:30 +00:00
perry
07a71fdfd0
Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
...
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.
1997-07-31 04:08:15 +00:00
perry
e53ae14bdd
Fix boot time vi recovery as reported by NAKAJIMA Yoshihiro in pr-3430
...
Really weird bug. On inspection, the shell code in rc looked fine, but
when tested, sure enough, the semantics of the shell were not what I
thought they were. Very unexpected to me, and obviously to the
hundreds of people who must have read those lines without seeing that
they were broken.
1997-07-31 03:35:39 +00:00
perry
7bd6622ead
make some items 'optional' -- per pr-3663 from Erik Bertelsen
1997-07-31 03:03:13 +00:00
mark
0c0a1966bb
Use the Pc entry from gettytab for our virtual terminals.
1997-07-31 02:34:18 +00:00
perry
ea4d1ded44
1) close my own pr-2502 by adding ce and ck to default
...
2) substantial cleanup. In particular, I got rid of lots of
egregiously obsolete entries, and I got rid of obsolete
capabilities in the only mostly obsolete entries, etc.
1997-07-31 00:38:30 +00:00
perry
9dee21c94e
add a default minfree file (requested by David Brownlee, pr-1577)
1997-07-30 22:17:55 +00:00
phil
851aef5327
Add ta=4.2BSD to both floppy3 and floppy5 entries. (If you are
...
disklabeling your floppy, you are most likely putting on a 4.2BSD
file system. This is in support of the distrib/i386/floppies
building via vnds.)
1997-07-29 18:46:06 +00:00
mark
fb64b594bc
Added a ramdisk option to build all the devices needed for an install
...
ramdisk.
Reformatted a couple of lines.
1997-07-28 17:41:59 +00:00
mark
b7b4948831
Added swap entry and a nice set of comments.
1997-07-28 17:38:45 +00:00
phil
ffde90f14b
Make all tty??/pty?? pairs that can be opened by openpty().
...
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.
1997-07-23 01:29:36 +00:00
phil
840d172649
Make all MAKEDEVs make fd/* similar. No need for awk or expr.
...
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.
1997-07-22 23:13:05 +00:00
phil
779c94c7af
Allow routes to be flushed in netstart (rc.conf option, default YES).
...
PR 3228.
1997-07-22 18:41:08 +00:00
perry
1edc7aef02
fix 3885 from Matthias Scheler -- print out the name of each loaded module
1997-07-18 23:38:52 +00:00
phil
a621321b0e
Add /usr/share/sendmail/cf that got missed in original addition of
...
/usr/share/sendmail/*. Closes PR 3881.
1997-07-17 20:45:01 +00:00
mark
237e1b7fb6
Create wd2 and wd3 device files for 'all' and 'floppy' options.
1997-07-17 00:12:55 +00:00
phil
bc41d19ad5
Add /usr/share/sendmail tree to distribution.
1997-07-16 23:33:59 +00:00
veego
fb68fae55e
Move savecore up before named to get a dump on low memory systems and
...
move 'mount -a' between yp and nfs daemons.
1997-07-15 11:19:20 +00:00
drochner
4e045b6b43
Take 2 to get the mount order "right", taking care of possible LKM
...
loads before netstart this time.
LKMs can be loaded at 3 strategic places in /etc/rc - before netstart,
before "mount -a" and after all. "before netstart" works only if
the /usr filesystem is local (or on NFS, if root is too).
An additional field ("when") in lkm.conf controls when the LKM is
loaded.
1997-07-14 11:55:44 +00:00
hpeyerl
93f2294467
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:29:17 +00:00
hpeyerl
91e0832cae
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:16:59 +00:00
veego
a6fe27dced
Back out the last two commits for now till we find a better way to fix
...
the mount problems.
1997-07-11 12:01:06 +00:00
veego
6553fa7064
rc.lkm needs /usr/bin/ld, so try to mount it with -t nonfs before rc.lkm.
1997-07-11 09:06:59 +00:00
phil
ce3196e8dd
Allows root to specify a MAILTO and have the security report mailed to
...
the same user as the daily output. If $USER is not root or MAILTO is
not set, MAILTO is set to root. Closes PR 2409.
1997-07-11 00:36:55 +00:00
drochner
d9dfde6362
Mount only "/" at the beginning (instead of all non-NFS filesystems).
...
This makes that the ordering of fstab is used for mounts which is
a) more intuitive and b) needed if {mfs,union,...} on top of NFS
is wanted.
1997-07-10 13:43:14 +00:00
mikel
34164c8eea
make toor's shell explicit to shut up /etc/security
1997-07-10 06:38:35 +00:00
veego
0307359cda
Added new device entries for ipfilter: /dev/{ipnat,ipstate,ipauth}
1997-07-07 22:29:35 +00:00
veego
a902cc2ba7
Added a new device entry for ipfilter: /dev/ipauth
1997-07-07 22:26:51 +00:00
christos
ea18ad7974
Run ntalkd as nobody.tty
1997-06-29 19:20:20 +00:00
kleink
44de15e66c
Create ./usr/share/man/{cat,man}3/i386; from Anders Hjalmarsson
...
<Anders.Hjalmarsson@economics.gu.se> in PR misc/3794.
1997-06-26 21:20:19 +00:00
thorpej
650e452081
Before disk checks are performed, do a "swapctl -A -t blk" so that
...
block-type devices are available during disk checks, which may consume
large amounts of memory if large file systems are present. Once "critical"
file systems (e.g. /usr and /var) are mounted, perform a "swapctl -A -t noblk"
to enable swapping on any swap files that may be listed in /etc/fstab.
1997-06-25 23:30:28 +00:00
mrg
790379bb6e
add man5/i386 (noted by erik fair)
1997-06-24 04:23:32 +00:00
lukem
fb34424eb0
* when checking /etc/master.passwd, read in /etc/shells for a list of
...
valid shells and then check each active account against that
* remove unnecessary ()s in a few printf's.
1997-06-24 02:32:38 +00:00
lukem
ff2ea5d139
* take advantage of xargs -0 when finding devices and set?id files
...
* use 'ls -q' in the above, so that characters that may cause problems
in the output are replaced with '?'
1997-06-24 01:16:47 +00:00
lukem
d0b6172bfe
Also check /etc/profile for setting of umask.
...
From Chris Jones <cjones@rupert.oscs.montana.edu> in [misc/3763]
1997-06-23 11:59:30 +00:00
lukem
b07aea8e1c
Ignore blank lines and comments in /etc/exports
...
From Jaromir Dolecek <dolecek@moria.ics.muni.cz> in [misc/3691]
1997-06-23 01:49:15 +00:00
lukem
f067035d68
Add output of uptime
to report.
...
From Hubert Feyrer <feyrer@smaug.fh-regensburg.de> in [bin/3220]
1997-06-23 01:45:21 +00:00
mrg
537136a76e
add man8/sun3x, man1/i386 and man1/x68k entries.
1997-06-22 06:36:30 +00:00
mrg
9345f4e581
add man8/mvm368k directories.
1997-06-22 06:24:35 +00:00
mrg
cbb4fa0bad
add man1/atari directories.
1997-06-22 05:44:09 +00:00
veego
4056cdf683
Add a comment that you now must have swap entries to satisfy swapctl(8)
...
and add a swap entry for sd0b (copied from the i386 fstab.sd).
1997-06-21 15:40:03 +00:00
mikel
08146f8adc
add /etc/profile
1997-06-21 06:10:03 +00:00
mikel
8736878363
add sample /etc/profile, cribbed shamelessly from csh.login. consists
...
solely of comments.
1997-06-21 06:07:38 +00:00
phil
0ed99f5f61
Correct cdev/bdev for cd*.
1997-06-18 21:09:36 +00:00
perry
0bea2a15f6
Note that you now must have swap entries to satisfy swapctl(8)
1997-06-16 00:58:49 +00:00
is
49e47cbf67
Build device nodes for audio device(s). Currently, only unit 0 == custom chip
...
audio.
1997-06-14 22:43:47 +00:00
mrg
277b52f964
use swapctl instead of swapon
1997-06-12 15:18:58 +00:00
jonathan
7945d5eccd
Move sample configuration files for ultrix, sv4 compatiblity from
...
src/etc/etc.<emul>/ to src/share/emul/<emul>/etc/
1997-06-08 23:31:13 +00:00
jonathan
10efce06ab
Sample /emul/ultrix/etc/svc.conf file for Ultrix compatiblity.
1997-06-08 09:10:21 +00:00
leo
6360466b8b
Add ipfileter stuff.
1997-06-02 20:46:26 +00:00
thorpej
830bea2938
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 7.
1997-06-01 09:23:57 +00:00
thorpej
4baed972cd
Add ipl, ipnat, and ipstate devices at the appropriate minors of
...
cdev major 91.
1997-06-01 09:12:02 +00:00
oki
6806df2da7
Add ipl device
1997-06-01 01:23:36 +00:00
thorpej
7f29bb4668
Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
...
device.
1997-05-31 23:52:55 +00:00
cjs
7a66732d34
Back out BUILDDIR and NOINSTALL changes.
1997-05-31 21:21:13 +00:00
mikel
d351214af2
bug fix and improvements, mostly from Enami Tsugutomo in PR misc/3681.
1997-05-30 05:18:59 +00:00
perry
b19dbed52b
update to version of May 19, 1997
1997-05-29 01:52:25 +00:00
leo
7b5d0624c9
Add device for new serial port.
1997-05-27 07:05:50 +00:00
cjs
5fd7ce7066
These updates to the build allow building against include files
...
and libs in the object tree, if you use a separate object tree,
while maintaining backward compatability with other build methods.
See the notes in src/share/mk/bsd.README for full details. Note
that the `make includes' target now only installs the include files
in the build directory (if you use one--otherwise they go in DESTDIR
just like before); `make install' will install include files in
DESTDIR.
1997-05-26 03:55:19 +00:00
kleink
7f69979797
Create /dev/ttyaN device nodes for Frodo-based APCIs.
1997-05-23 11:20:27 +00:00
cjs
4112a161ec
Back out last commit; bug was fixed in 1.37, but differently.
1997-05-22 21:41:09 +00:00
cjs
ab82fdc6b5
The interface setup loop was adding every interface in ifconfig -l
...
to $configured_interfaces because it never checked to see if if it
actually configured that interface. For this reason it was setting
$configured_lo0 as well, so that never got configured, causing all
sorts of problems.
1997-05-22 21:29:49 +00:00
jeremy
7c78d92d27
Forgot 'cat' directories.
1997-05-21 22:50:12 +00:00
jeremy
768be5bb21
Added architecture dependent subdirectories to man9.
1997-05-21 22:46:08 +00:00
lukem
c7acdd0732
Change interface config test so that the loop is always continued
...
if the interface wasn't configured, so that $configured_lo0 and
$configured_interfaces won't get incorrectly set if $net_interfaces ==
DEFAULT. From enami tsugutomo <enami@ba2.so-net.or.jp> in [misc/3635]
1997-05-17 14:12:24 +00:00
lukem
1b063db228
wrap $configured_lo0 in quotes, so that it doesn't barf if it's not set.
...
noticed by Thorsten Frueauf <frueauf@ira.uka.de> in [misc/3620]
1997-05-15 02:09:27 +00:00
lukem
c20c8f0d8d
fix up minor typos in comments
1997-05-12 23:40:50 +00:00
lukem
54e2fe6d7e
provide empty settings for $hostname, $domainname and $defaultroute,
...
with comments indicating alternation locations for info
1997-05-12 11:33:31 +00:00
lukem
1775d86183
* add support for $hostname, $domainname, $defaultroute and $ifaliases_XXX
...
* only configure lo0 if not configured by the "configure interface" loop
1997-05-12 11:26:10 +00:00
mikel
1e90223347
ntpdate is not a daemon, and add comment for kerberos_server
1997-05-12 05:00:13 +00:00
cjs
0dd1ac7fc9
Make xntpd put its pid in /var/run/xntpd.pid.
1997-05-11 05:08:16 +00:00
gwr
538bd898e9
add /dev/leds
1997-05-06 18:42:27 +00:00
scottr
bf904a4665
Spawn a separate shell for netstart, making sure to check the return value
...
and exit with error if appropriate.
1997-04-29 04:58:38 +00:00
scottr
a35572dc38
Source rc.conf to pick up network-related configuration variables.
1997-04-29 04:55:05 +00:00
perry
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00
mikel
93d6d76d2b
/usr/games/hide is owned by games.games, /usr/src has mode 755,
...
/var/at is owned by root.wheel.
1997-04-25 06:58:52 +00:00
mikel
6b7ae36087
/dev/fd should be owned by root.wheel, mode 755 (like /dev)
...
add 'ignore' tag for /usr/src
tabify, always give uname before gname, octal modes have leading 0
1997-04-25 06:57:23 +00:00
mellon
cd9ae1f9a8
Document dc flag and use it for hardwired lines.
1997-04-24 00:35:47 +00:00
perry
889bcd37bc
make motd update conditional on an rc.conf variable (update_motd), and
...
move it before interactive logins are possible (just in case).
1997-04-23 01:24:22 +00:00
mycroft
d8dcc6580c
Don't list directories with the setuid bit set or FIFOs.
1997-04-21 17:38:39 +00:00
mycroft
df1a64b9f5
Minor cleanup.
1997-04-21 11:19:57 +00:00
mycroft
4a0848acd9
When doing security checks in user home directory, sort by home directory, to
...
optimize lookups a little.
Also, add some more files to the naughty lists.
1997-04-21 11:14:41 +00:00
perry
8c70b4d638
move last items from rc.local to rc; rc.local is now actually for local stuff.
1997-04-19 03:10:57 +00:00
mikel
cae2f3b253
make /etc/aliases check a bit more discriminating: the line must be
...
uncommented, and it must contain a '|' character (forwarding to program).
1997-04-17 07:42:07 +00:00
pk
c8f5ee730d
Add sound & mixer device nodes (Jesper Nilsson; PR#3342)
1997-04-16 23:19:25 +00:00
mrg
046720d7d4
disable decode: alias.
1997-04-16 01:36:15 +00:00
cjs
c19956dcd1
Update for recent changes to ftpd(8).
1997-04-06 07:53:20 +00:00
leo
96ba57bbba
Also generate the wd device nodes.
1997-04-04 21:00:53 +00:00
kleink
47f9ae0ae6
mountd was moved to /usr/sbin ; pointed out by Thorsten Frueauf.
1997-04-03 11:00:16 +00:00
perry
3deb2910ff
Add /var/log/authlog and /var/log/xferlog.
...
The permissions and especially ownerships of all the /var/log files
should be re-examined -- bin:bin really isn't right for these files.
1997-04-02 05:23:49 +00:00
cjs
1470f854b3
Move network interface config after programs run on boot-up, to match
...
the order this actually happens in at boot time.
1997-04-02 01:59:04 +00:00
perry
680e326705
Change the way interfaces are configured on startup.
...
We no longer do /etc/hostname.* files, we do /etc/ifconfig.* files
instead, which contain lines each of which is fed to
ifconfig in turn. A new variable, net_interfaces, controls which
interfaces get brought up, by default, ifconfig -l is used to find a list.
1997-04-01 19:36:17 +00:00
mycroft
6f6e264129
Use a shell loop to build fd/*, rather than an awk script.
1997-03-31 21:28:24 +00:00
mycroft
736a7ada1e
Unroll the pty creation loop.
1997-03-31 21:23:34 +00:00
veego
640697a2be
Flush old filter rules and enable ipf again after the fix for
...
src/sys/netinet/ip_fil.c revision1.7
1997-03-30 19:08:14 +00:00
mikel
a38935b7bf
/etc/netstart doesn't need to be executable.
...
use four digits for all of the modes.
1997-03-26 07:41:55 +00:00
perry
9e2aafedeb
remove chroot on pwd_mkdb -- use -d option instead
1997-03-24 18:10:00 +00:00
cjs
7819184cce
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 07:57:24 +00:00
cgd
1d27905d84
fix bogon in the ImageDisk entry, add an entry for 3.5" floppies (useful
...
for making floppy images w/vnd).
1997-03-18 19:55:00 +00:00
sommerfe
80dde71f07
Add assigned numbers for ipsec and ipv6 protocols
1997-03-18 03:49:39 +00:00
thorpej
2c8588d217
Add the "se" device.
1997-03-18 01:43:51 +00:00
cjs
ec30dbdca7
Added mopd.
1997-03-17 00:02:02 +00:00
mycroft
064ae677a0
Use 8 bits by default.
1997-03-14 20:41:51 +00:00
perry
a8e367fd64
renamed to NetBSD.dist
1997-03-13 04:34:14 +00:00
perry
9eac259efc
mtree/4.4BSD.dist -> mtree/NetBSD.dist
1997-03-13 04:32:11 +00:00
perry
7f3db6ce0d
add cat8/pmax and man8/pmax
1997-03-13 03:36:59 +00:00
mycroft
100297bdf2
Eliminate another `X'.
1997-03-12 19:23:32 +00:00
mycroft
2564c9e659
When displaying the names for statd and lockd, include the `rpc.'.
1997-03-12 19:21:26 +00:00
mycroft
773a52a313
Add . GC , which isn't used.
1997-03-12 19:15:16 +00:00
mycroft
0e6463ba0a
Do the DEFAULT thing with mountd_flags. Don't output an extra
...
newline for statd and lockd.
1997-03-10 10:15:11 +00:00
mycroft
814cb67087
Minor cleanup.
1997-03-10 09:45:58 +00:00
mycroft
40202c2514
Minor cleanup.
1997-03-10 09:34:59 +00:00
mycroft
2069c0127b
If foo_flags is DEFAULT, run the program with a default set of flags. Most
...
users will use this, and therefore will never have to worry about flags
changing between releases. It's also a bit less error-prone.
1997-03-10 09:16:13 +00:00
scottr
ba3dca973c
Add configuration flags for lockd/statd, and start them if an
...
NFS server or client is configured and the flags are not NO.
1997-03-10 06:32:37 +00:00
mikel
8a50dcb5df
eliminate dangling references to config.old;
...
from Klaus Klein in PR misc/3295.
1997-03-06 23:41:22 +00:00
mikel
d015ce73e5
GENERIC{AHA,OTHER} have been merged into GENERIC; fixes PR port-i386/3274.
1997-03-04 06:30:01 +00:00
mikel
bd39709bf4
undo last change; we do use krb4 and we do need these files.
...
add RCSID to README.
1997-02-26 05:37:04 +00:00
mikel
4c965051fa
clean up remnants of kerberosIV from Lite2. we use kerberos5, which
...
lives in src/domestic.
1997-02-26 05:04:45 +00:00
mikel
1e59980d14
merge in 4.4BSD-Lite2 changes. only SCCS IDs were changed, since all
...
of the lite1-lite2 differences were either already present or
inappropriate.
1997-02-25 07:37:19 +00:00
mikel
a22d6abc89
import 4.4BSD-Lite2
1997-02-25 07:12:42 +00:00
cgd
cf4d64cd22
add a couple more useful entries
1997-02-24 17:31:31 +00:00
mikel
724ccf9f91
Merge in some changes from Lite-1:
...
- send mail.crit to console
- add comment re: authpriv
- add sample line for UUCP (commented out)
1997-02-21 09:04:26 +00:00