to run ABOUT FIRMWARE at the first isp_reset call. We *do* check for
the registers being set with values which would tell us if there's
firmware running or not- but this seems to not always work. It's not
essential, so move on.
Unconst pointer to f/w in the ispdv structure. Too many compilers get
unhappy over our walking the array. Make casts as appropriate so that
initialization in structure is still happy.
Limit length of fabric to 256. This will all go away soon.
Do a cleaner case of keeping multiple CPUs/threads from reading the
same response queue entries.
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
accessing them).
in how interrupts are down- the 23XX has not only a different place to check
for an interrupt, but unlike all other QLogic cards, you have to read the
status as a 32 bit word- not 16 bit words. Rather than have device specific
functions as called from the core module (in isp_intr), it makes more sense
to have the platform/bus modules do the gruntwork of splitting out the
isr, semaphore register and the first outgoing mailbox register (if needed)
*prior* to calling isp_intr (if calling isp_intr is necessary at all).
pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
quite simply a question of the Qlogic being little endian and having
to have stuff swapped on big endian machines- it also has to do with the
fact that the SBus and PCI DMA layouts are wierd with respect to this.
At any rate, now finally fixed- works on Mac G4, tested it on a SS10
for sparc, checked on alpha to see if I've broken anything, and as
soon as I get another spare afternoon I'll finally install a sparc64
version which should just work (as it'll be like the Mac).
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
and loaded. Remember to enable interrupts after isp_reset but before
isp_attach. Return CMD_EAGAIN on request queue overflow so we can retry
the command when there's more queue space.
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
