unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.
No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().
Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().
Make cpu_rootconf(9) describe the calling order.
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
as other mips and arm ports.
All cached data is cared on BUS_DMASYNC_PREREAD and
invalidating cache without writeback could cause unexpected
data loss if specified sync region is not cacheline aligned.
This may fix "ffs_alloccg: map corrupted" panic on acardide IDE disks,
which didn't happen on USB HDD.
http://mail-index.NetBSD.org/tech-kern/2011/12/15/msg012226.htmlhttp://mail-index.NetBSD.org/tech-kern/2011/12/17/msg012229.html
- add 'ls' op to struct fs_ops to support ls command on each fs,
enabled by -DLIBSA_ENABLE_LS_OP and SAMISCMAKEFLAGS+="SA_ENABLE_LS_OP=yes"
in libsa
- split sys/lib/libsa/ufs_ls.c into UFS specific part and MI part (ls.c)
that opens the target fs and calls fs-depedent XXX_ls() functions
- add a ls op for ext2fs
(all other fs than ufs and ext2fs don't have actual ls ops yet)
- replace existing MD ufs_ls() calls with this new MI ls()
The original patch was written for i386 and ext2fs.
zaurus zboot has been tested by nonaka@.
ews4800mips and x68k loaders have been tested by me (with several fixes).
landisk might be okay since it was almost copied from i386.
XXX1: "ls" op in fs_ops looks a bit inconsistent, but we will be able to
replace it with real fs ops like readdir if it's really worth
XXX2: someone might have to check sys/arch/ia64/stand/efi/libefi/efifs_ls.c
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.
This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.
http://mail-index.netbsd.org/tech-userlevel/2011/08/25/msg005404.html
This is used by disk tools such as disklabel(8) to dynamically decide is
the undelyling platform uses a disklabel-in-mbr-partition or not
(instead of using a compile-time list of ports).
getlabelusesmbr() reads the sysctl kern.labelusesmbr, takes its value from the
machdep #define LABELUSESMBR.
For evbmips, make LABELUSESMBR 1 if the platform uses pmon
as bootloader, and 0 (the previous value) otherwise.
sh3/sh3/sh3_machdep.c, where I moved them by mistake.
Pull the bus_space(9) routines into a new module,
sh3/sh3/sh3_bus_space.c, that is built only on !landisk.
Fixes the mmeye and landisk builds. Should fix other sh3 ports.
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.
<http://mail-index.netbsd.org/tech-kern/2010/04/02/msg007941.html>,
divide each machine's bus.h into bus_defs.h (constants & data types)
and bus_funcs.h (macro implementations of bus_space(9) routines and MD
prototypes).
Note that some bus_space(9) routines' implementation will move to .c
files from inline subroutines or macros in .h files.
I've only made the split for machine architectures where there is PCI.
All of the non-PCI-having architectures will require a similar split.
These #include files are not referenced by any (committed) Makefiles or
header files, yet. Changes to Makefiles, to <sys/bus.h>, and to some
more machine-dependent files will dribble in before I throw the switch.
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.
See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.
disabled by -D) from the output of newvers_stand.sh. Change -D to the
inverted logic, so that it adds the date to bootprog_rev in ().
Change all platforms accordingly. -D is added if MKREPRO is not yes and
wasn't present before. Platforms that didn't use -D don't depend on
MKREPRO now either.
we're ELF now, and there are many missing checks against OBJECT_FMT.
if we ever consider switching, the we can figure out what new ones
we need but for now it's just clutter.
this doesn't remove any of the support for exec_aout or any actually
required-for-boot a.out support, only the ability to build a netbsd
release in a.out format. ie, most of this code has been dead for
over a decade.
i've tested builds on vax, amd64, i386, mac68k, macppc, sparc, atari,
amiga, shark, cats, dreamcast, landisk, mmeye and x68k. this covers
the 5 MACHINE_ARCH's affected, and all the other arch code touched.
it also includes some actual run-time testing of sparc, i386 and
shark, and i performed binary comparison upon amiga and x68k as well.
some minor details relevant:
- move shlib.[ch] from ld.aout_so into ldconfig proper, and cut them
down to only the parts ldconfig needs
- remove various unused source files
- switch amiga bootblocks to using elf2bb.h instead of aout2bb.h
trees, because it can race with the libsa/libkern/etc. makefiles' own
cleandir rules. I think I've found all of the uses of the offending idiom...
Closes PR 43360.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)
i built about 20 of these kernels to check, but not all of them.
