Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
137,750 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

2394 Commits

Author SHA1 Message Date
augustss 95ba7bf87a Add Hosiden ParaParaParadise. From kern/30554. 2005-06-19 10:25:36 +00:00
enami 0c35ace672 Actually, usbd_trim_spaces was not writing to const memory, so revert 
unnecessary changes.  Instead, make the caller code easier to read.
After all, it is enough to suppress warning due to constfy.
 2005-06-19 04:01:36 +00:00
christos 47429afbb8 Return the beginning of the string, not the end. 2005-06-16 12:55:25 +00:00
cube 8a116ca5d3 Provide a header for UKBD_LAYOUT. It makes more sense, and it avoids 
quoting issues during the build process.

Reported and checked by spz@.
 2005-06-13 16:41:44 +00:00
martin b8aea19a7a Add a key symbol for the "Power" key. 2005-06-08 09:11:09 +00:00
sekiya 17c5e67809 Regen. 2005-06-01 09:16:07 +00:00
sekiya 47f4828c71 Add product IDs for devices that use the RT2500USB chip. From OpenBSD. 2005-06-01 09:15:41 +00:00
drochner 31924c84cd cast-qual fallout 2005-05-31 19:20:37 +00:00
christos ebdc03b439 make the definitions consistent with the declarations. 2005-05-30 04:56:13 +00:00
christos 7ceb7d6ff0 another UNCONST.. 2005-05-30 04:55:35 +00:00
christos a9cf21849d - const poisoning 
- eliminate variable shadowing
 2005-05-30 04:21:39 +00:00
christos 2f27be7da0 - const poisoning 
- avoid shadowing
- usbd_trim_spaces was writing to const memory; give it a buffer.
 2005-05-30 04:20:46 +00:00
skrll 35de2b7d10 Fix interrupt out transfers. 
Reviewed by Lennart.
 2005-05-28 07:44:37 +00:00
soren 5350b653c5 Sync 1284 id printing with the devinfo change, but leave it disabled for now. 2005-05-23 16:35:26 +00:00
augustss 191e9dab58 Handle DCD differently so it's not always asserted. From kern/30268 from 
Wolfgang Stukenbrock.
 2005-05-18 11:26:11 +00:00
augustss 36e939eaa1 Allow multiple opens of the control endpoint. This is unproblematic since 
the control endpoint is in some sense always open to the device.

From wulf@ping.net.au.
 2005-05-17 14:53:06 +00:00
augustss bf68872cdb Support for the HX version of the chip. 
Contributed by a donor that wishes to remain anonymous.
 2005-05-11 20:25:01 +00:00
augustss 834327c847 Don't keep the devinfo string on the stack, instead use malloc/free. 
This should cure some rare stack overflows.
 2005-05-11 10:02:28 +00:00
augustss cfff5f5e7a Only look at USBD_FORCE_SHORT_XFER for writes. 2005-05-08 08:12:08 +00:00
skrll f2f62a1726 Add support for optional interrupt output pipes as described in the 
HID specicification version 1.11.

Reviewed by Lennart. Thanks.
 2005-05-08 06:19:10 +00:00
abs b82eaee723 Add USB Portuguese (pt_PT) keyboard map, from Manuel Pata via 
Rui Paulo in PR/30041
 2005-05-05 22:27:29 +00:00
augustss 3fefd3b866 Make sure all physical addresses are filled in the qTD even when we have 
a page offset.

From Dan Ellis (as was the previous fix).
 2005-05-05 20:54:34 +00:00
augustss 9a2e60d4f6 Make sure to honor the USBD_FORCE_SHORT_XFER flag and generate an empty 
transfer when necessary.
 2005-05-05 20:40:20 +00:00
jonathan f36cdf86c7 Fix ifdef botch in previous revision: 
The `Static' forward declaration of ukbd_rawrepeat was inside #ifdef
UKBD_REPEAT but not #ifdef DISPLAY_COMPAT_RAWCKBD. The definition and
all other references are inside both #ifdefs.  The `static' function
declaration with no definition failed GCC warnings.

Pass GCC warnings by wrapping  the declaration with a check that both
CPP tokens are defined.
 2005-05-03 18:37:46 +00:00
augustss d069124a45 Don't emulate auto repeat in the keyboard driver, the wskbd driver does that. 
Auto repeat emulation can be turned on by defining UKBD_REPEAT, but this
should never be necessary.
 2005-05-03 13:15:21 +00:00
augustss c2c00331d7 Use UTF8 to encode strings read from the device (instead of using '?' for 
characters >=0x100).

Also add serial number string to the device information struct.
 2005-05-02 15:32:18 +00:00
wiz fbd2fc5eca Fix typo. 2005-05-01 21:47:11 +00:00
augustss 649ae4a707 Update TODO comment and copyright. 2005-05-01 19:45:40 +00:00
augustss 9c5fb57b96 Only complain when opening full speed isoc devices, other types seem to 
work reasonably (even if there is no proper scheduling of the TT yet).
 2005-05-01 19:35:07 +00:00
augustss 6aae573fe5 Fix the error check on completion of an xfer. Just because the qTD status 
field has error bits set doesn't mean there has been an error, unless the
HALTED bit is set as well.  The old behaviour could result in a transfer
being considered failed by the software, but a success by the device.
This seems to have affected mostly mass storage devices.

Pointed out by Dan Ellis in kern/29731.
 2005-05-01 19:24:39 +00:00
augustss 5adcc3d063 Timeout while polling is in ms not ticks. 
From OpenBSD.
 2005-05-01 14:21:27 +00:00
augustss 77e2a0a080 In eohci_waitintr, xfer->timeout is in ms, not hz. 
From OpenBSD.
 2005-05-01 01:14:30 +00:00
augustss 7beafdee3a Fix some spelling errors. 
From OpenBSD.
 2005-05-01 01:10:06 +00:00
augustss 31e5d222f7 Preserve any configuration data that may have been set by SMM/BIOS over 
chip reset.

From OpenBSD.
 2005-05-01 01:03:11 +00:00
augustss e556a8eca4 If the SMM driver had enabled ownership change interrupts, re-enable them 
temporarily before we attempt to take control.

From OpenBSD.
 2005-05-01 00:45:55 +00:00
augustss 5283bc3d82 Root hubs don't have transaction translators, so don't print anything 
about them for depth 0.  From FreeBSD.
 2005-04-30 20:54:13 +00:00
augustss 5b3acf742e Fix a race condition in xfer abort. Derived from a FreeBSD patch. 
An xfer could be aborted twice (which means that the second abort might
access deallocated memory).  This happened when an xfer timed out and
the timeout started an abort.  While that abort was taking place the
xfer could be cancelled (usually by closing the pipe), causing a second
abort to begin.
This is now handled by having flags indicating the abort state of an xfer.

Hopefully this will fix the occasional crashes when printing.
 2005-04-30 14:38:40 +00:00
skrll e71eebcad0 Complete the interrupt output transfer support copy from FreeBSD, but 
remove the incorrect access to the bulk part of the union.

Reviewed and OK'ed by Lennart.
 2005-04-29 19:15:13 +00:00
augustss 91c4478386 Check if we have any SCSI busses so this file doesn't cause link errors 
if used without SCSI.
 2005-04-29 17:52:46 +00:00
augustss 71f12914f1 If UKBD_LAYOUT isn't defined, but PCKBD_LAYOUT is, use the latter as the 
default layout.  Fixes half of kern/28668.
 2005-04-29 17:02:06 +00:00
augustss 17e2d8f05a Allow 32 chars in the saved vendor string. Fixes kern/29760. 2005-04-29 15:04:29 +00:00
augustss abcf879dd7 Get bit reversal table right this time. 2005-04-27 23:39:54 +00:00
augustss 35f6423e4f Add define for EHCI_MAX_POLLRATE. 2005-04-27 21:23:41 +00:00
augustss c3aad684bd Interrupt polling was spread very unevenly. Use the same bit reversal 
trick as in ohci.c to correct this.
 2005-04-27 16:42:26 +00:00
augustss d514cae370 With the interrupt fix in the previous commit low and full speed devices 
have a chance to work, so allow them (with a warning).
Make a small change to the transaction translator scheduling to make it
at least hobble along (again from Dan Ellis).
 2005-04-27 16:20:26 +00:00
skrll 5597345e50 KNF and s/a an/an/ 2005-04-27 07:47:25 +00:00
augustss 6490a3e8e5 Don't null the qh_link point in the interrupt tree after it has been 
initialized.  From Dan Ellis in kern/30003.
 2005-04-27 02:12:20 +00:00
drochner 1e5f8afdd2 remove debugging stuff which caused conflicts with USB_DEBUG kernels 2005-04-18 18:45:02 +00:00
toshii 2db3ae3497 Correct status value check for OHCI isoc transfer; 
the spec says that "not accessed" is 111x, not 1111.
 2005-04-17 14:46:49 +00:00
itohy 0ee992857f ukyopon(4): Kyocera AIR-EDGE PHONE driver 
Close NetBSD PR #25954 in a different way.
 2005-04-15 17:18:18 +00:00