Commit Graph

48 Commits

Author SHA1 Message Date
thorpej 150ca9d41a bcopy -> memcpy, strcpy 2001-07-07 15:59:37 +00:00
thorpej c2c26e1362 bcmp -> memcmp 2001-07-07 05:35:39 +00:00
wiz 2a8c778f1b retrieve, not retreive 2001-06-12 14:59:27 +00:00
lukem 1d15673dae consistently use FE_DEBUG (DEBUG was used a couple of places where it
was obvious that FE_DEBUG should have been used instead)
2001-01-20 07:31:00 +00:00
thorpej 6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
thorpej b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
thorpej 7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
tv 389bf995b5 %b -> bitmask_snprintf() 2000-08-09 01:56:33 +00:00
jhawk 1e59d99d28 For all network drivers that call ether_ifattach(), and also
have _detach() functions:
  Ensure that softc keeps state about whether the attach succeeded,
  and make the detach function return immediately if the attach did
  not complete.
2000-05-29 17:37:12 +00:00
thorpej 6e4b4f6954 Use ether_crc32_le(). 2000-05-12 16:45:42 +00:00
augustss 169ac5b3c1 Remove register declarations. 2000-03-30 12:41:09 +00:00
enami a54d060a1c Unhook the entropy source on detach. 2000-02-02 10:45:12 +00:00
enami a909d816d2 Add detach support. 2000-02-02 09:34:51 +00:00
itojun 65363da25e Merge in NetBSD/sh3 from cvs.kame.net repository.
Tree structure:
- sys/arch/sh3: sh3 generic code
	As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
1999-09-13 10:30:21 +00:00
abs b02dbae17e In xxx_mediachange(), if there is no callback to the front-end, just
return 0 instead of EINVAL.  In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
1999-06-23 04:17:10 +00:00
thorpej f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
thorpej 9caa955278 Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
ourselves.  Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:19:16 +00:00
explorer 3ebb419571 Update to slightly altered rnd_attach_source() api 1999-02-28 17:08:05 +00:00
thorpej 69a4436f8b Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING. 1999-02-17 03:40:59 +00:00
pk 19f705b094 Cast bus_space_{read,write}_multi arguments. 1998-12-03 23:33:45 +00:00
thorpej 1d0f24882d Now that the *_activate() functions don't do things which are attachment
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej dd6750820c Expose the "enable" and "disable" functions so that the front-ends can
access them.
1998-11-17 20:25:00 +00:00
jonathan 011f2bda08 defopt NS, NSIP. 1998-07-05 06:49:00 +00:00
jonathan 3751946b97 defopt INET, NETATALK. 1998-07-05 00:51:04 +00:00
mycroft 8f597a8744 Oops; make the table const. 1998-03-29 22:36:42 +00:00
mycroft a6b8b01d96 Use a 4-bit table to speed up the CRC even further, without increasing the
code size too much.
1998-03-29 22:34:27 +00:00
mycroft fe7f32954b Optimize the address CRC routines a bit. 1998-03-29 22:08:03 +00:00
enami 2b5f7351d2 Split Fujitsu MB9696x based ethernet card driver into bus
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
thorpej 06ce220790 Update for config changes. 1998-01-12 09:39:57 +00:00
perry fff05a68ab RCSID Police. 1998-01-05 07:31:05 +00:00
explorer f9370ddc7a Add and/or update rnd_*() hooks 1997-10-15 05:55:13 +00:00
is 07b064e02e New ARP system, supports IPv4 over any hardware link.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.

For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
thorpej 0211a3232d Appease the compiler: get rid of some unused variables, add some
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess.  Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
christos 86373f8cf9 backout kprintf changes 1996-10-13 01:37:04 +00:00
christos 58953408cb printf -> kprintf, sprintf -> ksprintf 1996-10-10 22:04:48 +00:00
mycroft cec36bf8d5 Use intr.h. 1996-05-12 23:51:23 +00:00
thorpej 15354e899c Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit.  Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
cgd 51e85d07b9 update for addition of a machine-dependent cookie as the first argument
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
mycroft 740637ad71 If we dequeue a packet due to excessive collisions, make sure we check
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
thorpej 6d9ea4cf59 New device attachment scheme:
- split softc size and match/attach out from cfdriver into
	  a new struct cfattach.

	- new "attach" directive for files.*.  May specify the name of
	  the cfattach structure, so that devices may be easily attached
	  to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
mycroft 3da4b2a160 The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
mycroft e4413d1a10 Fix another comment. 1995-08-07 14:26:51 +00:00
mycroft f657f5bf3e Make this interface simplex. It's more efficient, and sidesteps the
problem of receiving our own multicasts in promiscuous mode.  Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
mycroft 57528ce346 Init functions are always called at splimp(). 1995-07-23 20:36:51 +00:00
mycroft 465cfd15f0 Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
cgd 2b71eae2c7 note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
mycroft d9fc8ef092 Remove check for if_addrlist == 0; if_attach() always puts one address on
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
mycroft 825d2fee22 Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup.  Needs more work.
1995-05-01 02:47:07 +00:00