f9a7294e32
Get rid of the extra hop between fdcintr() and fdcstate(), and fdcretry()
...
doesn't need to return a value.
1994-04-08 18:51:19 +00:00
55efebae3e
Fix return values from some interrupt routines.
1994-04-08 18:22:15 +00:00
72c593c2e3
Fix return fro isa_epprobe().
1994-04-08 17:58:47 +00:00
0ae5489036
Return correct values from edintr().
1994-04-08 17:16:39 +00:00
fb12ba70e2
Only #include other stuff #ifdef KERNEL.
1994-04-08 04:24:16 +00:00
4c8226b387
Clean up deleted files.
1994-04-07 22:12:13 +00:00
1296236880
Macroize some more constants.
1994-04-07 17:34:20 +00:00
cc1c9183b4
splbio() should also block timeouts.
1994-04-07 17:00:55 +00:00
8d725ebdb0
From Mark Weaver: Fix some defaults listed in the documentation and comments.
1994-04-07 16:26:27 +00:00
8691c46e32
Implement dynamic IRQ configuration and IRQ sharing. Inline spl*() calls.
...
Reorganize and clean up the relevant code.
1994-04-07 07:31:09 +00:00
3f5e4f423f
Implement dynamic IRQ configuration and IRQ sharing. Inline spl*() calls.
...
Reorganize and clean up the relevant code.
1994-04-07 06:48:19 +00:00
728fddd911
add ktrace
1994-04-06 23:30:26 +00:00
1c340d9a3e
More stylistic cleanup.
1994-04-06 04:46:55 +00:00
62c628e14a
Change two testl's to testb's.
1994-04-06 04:30:18 +00:00
b9aee0da11
General style cleanup.
1994-04-06 04:22:40 +00:00
3d09f5597c
Need to clear %fs and %gs early on.
1994-04-06 01:31:33 +00:00
8b1679d75d
Remove spurious arg to printf(), per JT Conklin.
1994-04-06 00:27:49 +00:00
b2edbd1ccd
Fix up #includes.
1994-04-05 19:52:16 +00:00
d48a7c43fb
Mostly cosmetic changes.
1994-04-05 19:47:45 +00:00
71dd213832
Optimize _insque() and _remque(), and remove all the casts.
1994-04-05 19:09:14 +00:00
10466baa67
npxexit() doesn't need its arg.
1994-04-05 17:57:02 +00:00
7d2ada5f79
Various cleanup.
1994-04-05 17:56:26 +00:00
ae2e24c9ab
Correct display of bit test insns.
1994-04-05 17:31:31 +00:00
284797351b
Garbage collect.
1994-04-05 17:23:39 +00:00
670aa6914a
Add some notes about swtch_exit().
1994-04-05 15:08:46 +00:00
25317c76f3
Increase ahb_send_mbox timeout.
1994-04-05 08:53:00 +00:00
936d23aa7a
Don't bother checking npxproc on exit.
1994-04-05 08:02:09 +00:00
2fa4ce0376
Use swtch_exit().
1994-04-05 08:01:12 +00:00
8baa13db22
Add P_VMSPACE.
1994-04-05 08:00:21 +00:00
e6afef6b33
Optimize setrq() and remrq(). Implement swtch_xeit(p), which switches to
...
proc0's context, deallocates p's adress space, and resumes the swtch() that
was suspended in proc0.
1994-04-05 07:59:55 +00:00
a02a395d9f
Clear curproc earlier so we don't accumulate CPU time while idle. Document
...
register usage for future generations.
1994-04-04 23:07:22 +00:00
1380575066
Various minor cleanup.
1994-04-04 16:48:21 +00:00
39b1222c87
Try to keep interrupts enabled more. Do the %fs ans %gs load *after* the LDT
...
is restored.
1994-04-04 15:56:47 +00:00
f2cf7f20f3
Leave the old cpl on the kernel stack, too, and optimize the case of switching
...
to the same process.
1994-04-04 09:42:47 +00:00
49f79f65d2
Add some; delete some.
1994-04-04 08:58:55 +00:00
d6f7f7005a
savectx() now does the stack copy; don't need to do it here.
1994-04-04 08:58:25 +00:00
1ccad96544
Save %fs and %gs across process switches. Leave some registers on the kernel
...
stack rather than in the PCB. Make savectx() do the stack copy.
1994-04-04 08:57:54 +00:00
80f4421fb8
Fix a bug in swtch(), and speed it up a bit.
1994-04-04 03:47:20 +00:00
5fc2bbc2a3
Minor speedups to copyin/out functions, and fix a couple of obscure bugs.
1994-04-04 01:56:54 +00:00
7482d8f203
Clean up some more dependencies.
1994-04-03 23:09:39 +00:00
314bc1f5db
Clean up #includes.
1994-04-03 22:50:14 +00:00
beb5680d81
This is #included multiple times.
1994-04-03 22:36:41 +00:00
0234c30a00
Clean up #includes.
1994-04-03 22:28:23 +00:00
3a8dd5d6b1
Clean up #includes.
1994-04-03 18:58:55 +00:00
3ce26e4f42
Make sure we get psl.h.
1994-04-03 18:54:21 +00:00
c075fee1b2
Clean this up a little.
1994-04-03 18:53:53 +00:00
6a15886fc6
Oops.
1994-04-02 22:15:03 +00:00
f611fb1eb1
Some stylistic cleanup.
1994-04-02 21:32:54 +00:00
1c1d646c7e
kill bogon
1994-04-02 08:42:59 +00:00
9a9b1d99fa
Minor code cleanup.
1994-04-02 08:04:26 +00:00
89a94f33b4
change __syscall() handling so others can cut/paste it...
1994-04-02 08:04:25 +00:00
98895901ea
Minor code cleanup.
1994-04-02 08:04:25 +00:00
3b1d5536ec
Need syscall.h.
1994-04-02 03:52:15 +00:00
f8b80b0d94
Implement __syscall().
1994-04-02 03:51:37 +00:00
5edb523880
Remove an old hack that now just causes a small memory leak during autoconfig.
1994-03-31 16:59:04 +00:00
b6f5403319
Some patches from Rafal Boni to fix egregious 3C507 mistakes.
1994-03-31 06:16:35 +00:00
23c5083a45
Minor changes.
1994-03-30 18:35:11 +00:00
2ed6c26523
add -r flag, for RB_DFLTROOT
1994-03-30 11:19:12 +00:00
b6fbebba6c
Change some defaults to be more reasonable.
1994-03-30 08:03:27 +00:00
8ccc7bdffb
Turn off the timeout debugging info by default.
1994-03-30 04:58:32 +00:00
ea6d9af1c2
Print out board revision info.
1994-03-30 04:07:48 +00:00
6ec90fd0d5
Minor fix to attach messages.
1994-03-30 00:54:43 +00:00
d6e1028ce6
foo
1994-03-29 22:59:55 +00:00
928e98118a
More performance tweaking.
1994-03-29 20:16:14 +00:00
95f1b85a5a
astprobe(): Set ia_iosize.
1994-03-29 06:58:29 +00:00
722ea327b7
Clean up deleted files.
1994-03-29 04:40:54 +00:00
d887452c3b
Update for new code.
1994-03-29 04:40:38 +00:00
9478340099
Update for new SCSI code, and we don't need counts on some of these files
...
any more.
1994-03-29 04:39:25 +00:00
b67467a65e
Update for new autoconfig.
1994-03-29 04:38:05 +00:00
592ec61b17
Updates for new autoconfig.
1994-03-29 04:35:37 +00:00
5eb99ad76e
New autoconfig mechanism. Hacked at the moment to use old config(8), but
...
look mostly like config.new to drivers.
1994-03-29 04:34:18 +00:00
afe83acd57
New version from me.
1994-03-29 04:32:39 +00:00
6bce5180d6
New version from Sergey Ryzhkov and Serge Vakulenko.
1994-03-29 04:32:12 +00:00
e1d51562a9
New SCSI system, based on Julian's more recent work.
1994-03-29 04:30:15 +00:00
22fac0402f
pcvt 3.0, with some performance enhancements by Joerg Wunsch and me.
1994-03-29 02:46:38 +00:00
b89bdd5e49
pcvt 3.0, with some performance enhancements by Joerg Wunsch and me.
1994-03-29 02:46:30 +00:00
627cafc287
pcvt 3.0, with some performance enhancements by Joerg Wunsch and me.
1994-03-29 02:44:39 +00:00
4c38082a0e
pcvt 3.0, with some performance enhancements by Joerg Wunsch and me.
1994-03-29 02:39:46 +00:00
e460326df5
casting perversion
1994-03-27 08:55:31 +00:00
8385c5bbf2
add the ast mp card that's in lamp
1994-03-27 07:01:49 +00:00
d5a269b4dd
Put controller target in scsi_switch.
1994-03-25 07:38:51 +00:00
008f13bb69
Fix off-by-one error in comopen() unit number sanity check. From Brian de
...
Alwis.
1994-03-25 04:38:01 +00:00
9c8b310d5e
Don't need to do all the splx() crap on syscall and trap exit.
1994-03-25 00:46:51 +00:00
873b203a64
Reorder AST check.
1994-03-25 00:45:42 +00:00
99b8c3e6f6
Actually finish this change from three months ago.
1994-03-25 00:06:43 +00:00
df96b74ad3
Small code clean up, and make the normal cases a few cycles faster.
1994-03-24 21:50:33 +00:00
1c5df11dd3
i have an ast card
1994-03-24 08:20:20 +00:00
feacc618e1
allow mmaping of /dev/mem and /dev/kmem. The former for folks with
...
buff vid boards which map at high physical addrs, the latter for fun,
since it's possible.
1994-03-23 05:09:45 +00:00
18f36e1745
copyright foo
1994-03-23 03:55:24 +00:00
a3c2ef3169
Don't poll more than 4 ports.
1994-03-23 03:04:32 +00:00
4cc5b77bfa
Some stylistic cleanup, and a very minor speedup.
1994-03-23 03:01:50 +00:00
c6b399cce8
add AST-style serial multiport support, from Roland McGrath
...
<roland@@frob.com>. Needs light clean by Mr. I386, but mostly
OK. For some reason, Bad Things (TM) happened on the last cvs commit.
1994-03-23 01:28:23 +00:00
c24c16f35f
add AST-style serial multiport support, from Roland McGrath
...
<roland@frob.com>. Needs light clean by Mr. I386, but mostly
OK.
1994-03-23 01:25:53 +00:00
c0fdd09d5c
add line for 'ast' mp-com driver. needs to go into fils.newconf eventually
1994-03-23 00:37:23 +00:00
8f86452554
Standardize #includes.
1994-03-18 19:08:28 +00:00
456e197d26
add reasonable support for MDMBUF output flow control. input to be done later
1994-03-18 05:13:26 +00:00
332469124c
needs these includes like a hole in its head...
1994-03-18 03:11:47 +00:00
91906bc019
Inline assembly [hn]to[nh][sl] functions used xchgb %h1,%b1 instead of the
...
faster (on the i486 & i586) rorw $8, %w1. The inline assembly for GCC 1.X
already used rorw. Using rorw is one byte longer, but we wouldn't be
inlining at all if we weren't optimizing for speed.
1994-03-16 17:20:24 +00:00
b03c4f17ca
Remove two bogus splx()s.
1994-03-14 13:32:56 +00:00
936ff09fcd
Fix for trailer support reported by <sommerfeld@orchard.medford.ma.us>
1994-03-14 06:57:25 +00:00
6c218e563f
add basic integral types (a la sparc port) that new nvi wants.
1994-03-14 02:10:40 +00:00
663711d26e
add NFSSERVER
1994-03-13 09:43:47 +00:00
9801d57e4e
export SIR_COM
1994-03-13 00:48:19 +00:00
229878db12
need highmask to be extern'd.
1994-03-13 00:46:04 +00:00
fe3d0b99c3
Prefix the busy-wait messages with `ignore this:' so people stop reporting
...
it as a bug.
1994-03-12 22:36:40 +00:00
9ab5683dc7
Fix problem with reading the disk label if it's not at the beginning of the
...
disk.
1994-03-12 22:32:48 +00:00
28183d4cff
Remove last vestiges of dcfclk.
1994-03-12 22:06:20 +00:00
39f57c7820
copy appropriate hardware config bits from config's flags
1994-03-12 08:04:19 +00:00
86ac0459be
fix some of the last; thanks to charles for looking it over...
1994-03-12 07:43:03 +00:00
c38cf8e43e
support new ioctls. fix the way CRTSCTS is used, etc. Seperate 'hardware'
...
and 'software' flags. beginnings of multiport support.
1994-03-12 07:25:16 +00:00
15d0f84500
Fix bug in last change.
1994-03-12 04:10:03 +00:00
15d758c39a
Remove backward compatibility hacks for config(8), as they are no longer
...
useful.
1994-03-12 03:45:03 +00:00
d884f7c425
Update to match config(8).
1994-03-12 03:34:02 +00:00
d72e576cfb
Rearrange top-level configuration to be more consistent.
1994-03-12 03:29:20 +00:00
fa9a6175a6
Update for new config(8).
1994-03-12 03:28:16 +00:00
5b7db22d24
garbage collect, and slight line-spacing change
1994-03-12 02:55:21 +00:00
427a14083c
Added RCSID macro, for RCS ID's (what else?).
1994-03-12 01:23:21 +00:00
119f3ea688
Various:
...
Put WDF_ERROR in the wdc_softc, to avoid gratuitously forcing non-active drives
into single-sector mode on the next transfer. Arrange to wait for an interrupt
after wdsetctlr(); this avoids long busy-wait delays, and gets rid of the
`extra interrupt' messages (except for one immediately after autoconfig on some
machines). Replace some uses of wdsetctlr() with simply lowering wd->sc_state;
no point in forcing this immediately. Allow control operations to time out.
Enable the warnings for long busy-wait delays by default. Some other minor
things not worth mentioning.
1994-03-11 23:29:12 +00:00
08678da2df
hack to get cursor right on video cards with real 6845 chips
1994-03-11 12:22:31 +00:00
99dbc0692d
Add a heuristic for detecting old config(8)s. This is very temporary.
1994-03-10 22:30:06 +00:00
390f5990bb
Now that the disk probe routines are actually called, they need to return
...
something.
1994-03-10 21:52:07 +00:00
b8be52a88c
Update for new config; handles subdevices differently.
1994-03-10 21:38:46 +00:00
367c93feb4
Updates to match config(8).
1994-03-10 20:52:09 +00:00
865b38f30e
Oops. Forgot two prototypes.
1994-03-10 20:26:26 +00:00
0c19458c6f
More updates for new config.
1994-03-10 20:05:30 +00:00
aa45779df7
Update for new config.
1994-03-10 19:57:20 +00:00
095308adeb
Add isa_dmaabort().
1994-03-10 18:14:32 +00:00
9ece60144d
Fix some constants in preparation for my new driver.
1994-03-10 18:10:41 +00:00
e4102b8797
Cleanup to fit standard coding conventions, and *many* bugs fixed.
1994-03-10 05:18:33 +00:00
ba5c433f94
Make ep0 reflect factory default settings rather than my own.
1994-03-09 22:55:55 +00:00
ce516ff13d
Make FFS optional
1994-03-09 21:21:37 +00:00
aab638bd07
Fix NS handling.
1994-03-09 17:19:10 +00:00
3a57542a30
Back out previous change for now.
1994-03-09 07:58:39 +00:00
229b0deb91
Fix #includes.
1994-03-09 07:37:08 +00:00
badabd0634
add I586_CPU at the suggestion of mike.long@analog.com
1994-03-09 02:57:21 +00:00
a692d2185a
Inline spl*() calls.
1994-03-08 13:24:46 +00:00
a618881dd7
#include cpu.h in all files which use spl*().
1994-03-08 12:21:10 +00:00
1a53c20eaf
Inline a call to splhigh().
1994-03-08 11:59:41 +00:00
49051114a6
Major cleanup and many bugs fixed; based in part on Brad Huntting's version
...
for BSD/386. More to be done when the low-level interrupt system is replaced.
1994-03-08 08:12:56 +00:00
917559fb12
Add `com' softintr.
1994-03-08 06:57:28 +00:00
d5bc8cd801
cut and paste bit me.
1994-03-08 02:38:08 +00:00
90f8ec1f8f
Some minor speed improvements; inspired by John Dyson's code.
1994-03-07 22:30:30 +00:00
5a17003403
Some changes inspired by Bruce Evans's driver:
...
Consolidate error reporting in one function. Actually use the dk_status and
dk_error fields, and pass around only the error bit to avoid lots of unneeded
assignments and tests. No functional differences.
1994-03-07 05:54:44 +00:00
991225bfc8
Remove DKFL_QUIET.
1994-03-07 03:18:35 +00:00
581b6ca207
Don't let uninitialized variable slip by
1994-03-06 19:34:46 +00:00
41cc9cb4f2
Better delay() from magnum branch.
1994-03-06 17:37:56 +00:00
5f4063cc56
DELAY() --> delay(). This is not a macro.
1994-03-06 17:21:44 +00:00
0c082bcaf8
DELAY() --> delay(). This is not a macro.
1994-03-06 17:18:43 +00:00
87ed28e74e
Move the drive select and various other things into wdcommand(), to avoid
...
duplicating code.
1994-03-05 08:17:06 +00:00
3e02952c52
Make sure we clear the interrupt when necessary. Why this isn't needed on
...
my hardware is a mystery.
1994-03-04 23:43:14 +00:00
mycroft