944b6966e9
Fix a transmit bug and get a little more out from the receive logic.
2000-06-08 19:58:49 +00:00
f7d6ee345c
Use _POSIX_SOURCE-safe type names
2000-06-08 19:01:44 +00:00
625dbd8f87
in allegedly-MI code, if we're gonna use '#pragma pack(N)', #pragma pack()
...
should be used to reset the packing. (#pragma pack(4) was used here
before. "wrong!")
2000-06-08 18:22:15 +00:00
94ffeedb49
Allow for cacheable device maps (in case there's some RAM out there).
2000-06-08 17:59:32 +00:00
00e45ca869
Print all 64-bits of TTE data in db_pmap_kernel().
2000-06-08 17:45:29 +00:00
6baca0c1ad
Fixup signed/unsigned issues so 32-bit addresses are not sign extended.
2000-06-08 17:43:24 +00:00
860feb4e74
Fix ordering of sync operations depending on whether it's PRE- or POST-.
2000-06-08 17:41:46 +00:00
d3336b64a1
Squeeze a few more bytes so the INSTALL kernel will fit on a floppy.
...
Use tlp instead of de. Add in gm[ac]. Remove slip and Gallant 22x12 font.
Compile ofwboot.elf -Os.
2000-06-08 17:35:47 +00:00
a273b333a3
Support large (>1 page) DVMA maps so UltraSPARC IIi will work.
2000-06-08 16:17:29 +00:00
08af61208e
Fix DVMA base address calculations.
2000-06-08 15:23:44 +00:00
59f702f762
gdb macro to print the kernel message buffer
2000-06-08 14:45:24 +00:00
12db2d5991
viking_pcache_flush_page: use entire PA tag field.
2000-06-08 14:45:18 +00:00
3c6d754bbb
Rename "stack" to "stacktrace" and have "stack" call "stacktrace $ebp $eip"
...
(saves typing).
Use sizeof(long) instead of "4".
2000-06-08 14:42:11 +00:00
ffedfcb68d
make sure not to overwrite sockaddr on PRU_SEND/PRU_CONNECT to
...
link-local address. From: frank
2000-06-08 13:51:33 +00:00
25e58c2dc7
Added USB devices.
2000-06-08 13:16:55 +00:00
48966cc65c
USB support
2000-06-08 13:16:23 +00:00
ece024b6cf
Un-__Pify.
2000-06-08 10:49:19 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
18495b9efa
Need <sys/systm.h> for declaration of bzero().
2000-06-08 07:30:47 +00:00
c2715f98ce
Need <sys/systm.h> for declaration, and make argument declarations match.
2000-06-08 07:29:22 +00:00
d8dcb11d4f
don't include ISA headers. these have been properly abstracted so that
...
the ISA headers are unnecessary, and they're used by PCI VGA. There may
not be any ISA at all.
2000-06-08 07:01:19 +00:00
ee41ef7a04
ensure an ebus really does exist in ebus_match; fixes spurious attachments with the ebus on a hme pci card.
2000-06-08 06:52:25 +00:00
78009a319f
Need <netinet/in.h> for declaration.
2000-06-08 06:50:46 +00:00
149050ce7b
Need <sys/systm.h> for panic() declaration.
2000-06-08 06:48:45 +00:00
186d2ccb7f
Need <sys/systm.h> for declaration, and make argument declarations match.
2000-06-08 06:47:17 +00:00
d220ba7dc4
Make this compile with GRF_COMPAT. Problem pointed out by Hauke Fath.
2000-06-08 06:01:27 +00:00
c7eb823cc8
1.4ZB -- ltsleep().
2000-06-08 05:53:34 +00:00
b0afc900f5
Change UVM_UNLOCK_AND_WAIT() to use ltsleep() (it is now atomic, as
...
advertised). Garbage-collect uvm_sleep().
2000-06-08 05:52:34 +00:00
6ea30ef2e8
Use ltsleep().
2000-06-08 05:50:59 +00:00
fcc7898856
Change tsleep() to ltsleep(), which takes an interlock argument. The
...
interlock is released once the scheduler is locked, so that a race
between a sleeper and an awakener is prevented in a multiprocessor
environment. Provide a tsleep() macro that provides the old API.
2000-06-08 05:50:37 +00:00
afce867d15
Fix loadfpregs(): the register used to access the floating point registers
...
was not getting loaded, and the floating point registers were being loaded
from the proc structure rather than the FP registers in the pcb.
2000-06-08 04:47:13 +00:00
f9b0e0c4eb
gdb script for backtracing an i386 kernel stack.
...
Useful when "where" in gdb fails to cross trap()s,
e.g. port-i386/10313
2000-06-08 03:15:40 +00:00
81afcb3940
And more ANSI'ification!
2000-06-08 03:10:06 +00:00
966b3da402
ANSI'ify.
2000-06-08 02:53:47 +00:00
8355a216eb
Add the `rnd' driver.
2000-06-08 02:20:50 +00:00
0bf91362b9
Add cpu_counter() for rnd(4), using the rpcc insn.
2000-06-08 02:19:20 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
2dde4ce0c9
Slight stylistic changes. Add KAME checksum routine.
2000-06-07 19:31:33 +00:00
733a6e059b
Increase the miniroot size to 3072 (to match INSTALL and INSTALL_TINY).
...
This is needed due to TI-RPC being larger.
2000-06-07 19:29:45 +00:00
4c15219d3b
* Access hardware directly in zscn* instead of calling OF.
...
* Clean up.
2000-06-07 17:37:07 +00:00
0b01d83083
Revert rev. 1.30.
2000-06-07 16:37:24 +00:00
f92ae923f9
Make "src/regress/sys/kern/extent" build again.
2000-06-07 16:25:15 +00:00
3f94f56142
Adapt struct scsipi_adapter changes.
2000-06-07 14:40:20 +00:00
30bae800ae
Mark 'n' explicitely as output of the 'mulul' instruction.
2000-06-07 14:26:11 +00:00
85063167c9
Correct SIMPLELOCK_INITIALIZER for the LOCKDEBUG case.
2000-06-07 13:50:40 +00:00
b3a25bd8a5
Config root on md0a, not md0.
2000-06-07 13:26:25 +00:00
84ceb5dfe7
Fix long-standing inconsistency between manapage and code.
...
The "ditto" character is " (double-quote); not , (comma) as
indicated in the manpage; and not ' (single-quote) as indicated
in the man.old -style manpage from which the mdoc manpage was derived.
Some other versions of ddb use single-quote for this feature, and this
part of the code may change again in the near future, but the documentation
now affects reality now.
they
2000-06-07 13:24:11 +00:00
5afb55f9cd
child_return() should take void *arg.
2000-06-07 11:34:17 +00:00
ragge