sommerfeld
6e5d9aa87d
Add -f /var/db/ntp.drift to default xntpd parameters.
1999-10-09 21:07:19 +00:00
bouyer
eac2fbdb83
Add support for $defcorename
1999-09-28 14:53:17 +00:00
itojun
02972f5985
add sanity check on rtadvd invocation (allowed on IPv6 routers only).
...
add rc.conf entry for rtsold.
1999-09-03 13:40:15 +00:00
is
79de537d1c
Screenblank has supported more than sun3 and sparc for a long, long time.
1999-08-16 20:01:03 +00:00
drochner
db20439533
repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus
...
"/usr" must be mounted. mount_critical_filesystems() didn't mount it,
even if listed in "critical_filesystems", if it is nfs.
Solution: introduce another rc.conf variable
"critical_filesystems_beforenet" which contains filesystems to be mounted
before "netstart".
Perhaps "netstart" should be split up, but this would make things even
more complex...
1999-07-07 21:24:56 +00:00
itojun
94e64335b4
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd).
...
Right now netsetart does not bother you even if you do not have
"options INET6" in the kernel.
1999-07-03 03:29:29 +00:00
augustss
aed7c5dbd9
usbd is dead.
1999-06-30 06:48:05 +00:00
jwise
05bdcfc198
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 03:30:02 +00:00
perry
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
nathanw
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
jwise
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
mellon
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
cjs
668efbbcec
Change mount_critical_filesystems() so that if given an argument
...
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.
1999-04-01 03:58:44 +00:00
sommerfe
5a90dbf495
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 13:10:17 +00:00
mellon
fce1081120
Add critfs_require_network, dhclient and dhclient_flags variables.
1999-03-24 18:50:07 +00:00
drochner
1cc109aa7d
rc.wscons can take arguments, so we shouldn't simply source it but exec in
...
a subshell. Being here, add a prototype wscons_flags variable.
1999-03-17 15:49:47 +00:00
drochner
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
mrg
4471dfd72e
oops, do not set a default securelevel.
1999-02-01 00:32:52 +00:00
mrg
eddf0f4e2c
increase the securelevel (using the same rules as before) much earlier in the
...
boot process. before cron, sendmail, inetd, etc, are run, but after lkms are
loaded. this avoids the chances of `@reboot', mail .forwards, remote logins,
etc., happening before the securelevel has been raised.
1999-01-31 08:46:58 +00:00
mrg
97a24ca055
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 12:42:46 +00:00
jwise
f6cc762de0
Enable cron to be turned on and off from rc.conf, like other daemons.
...
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 04:58:37 +00:00
jwise
4b0bbbdbe6
Add $portmap_flags variable, now that portmap has optional flags, and
...
by default, pass '-l' flag (libwrap logging) by analogy with inetd
1999-01-11 21:04:38 +00:00
cjs
d26897ab43
Separate hardware daemons and add comments.
1998-12-22 13:58:37 +00:00
mrg
76ee97dd88
do not start usbd by default.
1998-12-06 08:37:29 +00:00
bad
96cda5fe94
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
...
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).
1998-10-29 20:24:56 +00:00
tv
52c5bfaee0
Disable rc.lkm by default. This has the nontrivial, hidden effect that if
...
rc.lkm is run, and BIND is used to resolve names, the BEFORENET stage of
rc-calling-rc.lkm will hang trying to mount a nfs /usr.
1998-09-14 18:22:20 +00:00
lukem
55c8240d52
add /usr/pkg/sbin:/usr/pkg/bin to (commented out) PATH entry
1998-08-04 04:09:05 +00:00
augustss
250dd33583
Turn on the usbd daemon per default. It's harmless since it just
...
exits if there are no USB controller.
1998-08-01 20:57:59 +00:00
augustss
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
fair
048c02b861
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 19:01:13 +00:00
mrg
4c04041950
add "screenblank" support.
1998-04-07 04:47:33 +00:00
lukem
a6fc46b600
fix indentation
1998-01-26 12:01:35 +00:00
christos
0a66272517
PR/3638: David Brownlee: Add /etc/ipnat.conf functionality.
1997-12-20 20:11:53 +00:00
chuck
40fa2961dc
fix formatting
1997-12-03 16:41:53 +00:00
mrg
d2cfb19c3d
print a warning if no swap devices are configured and "no_swap" is not YES.
1997-11-23 04:17:57 +00:00
mrg
dae7a8ed1d
- remove additional `adding interface aliases:' message.
...
- add `ppp_peers' support, which will run `pppd call <peer>' for each
peer listed in the ppp_peers file that also has a /etc/ppp/peers/<peer>
configuration file.
1997-11-17 17:45:28 +00:00
jonathan
6ba565c4d3
Add options to rc.conf and rc to start xfs (x font server) and xdm.
...
Add entries to rc.conf.5.
While we're here, note that the domestic kerberos damons are still
Kerberos IV, not kerberos version 5.
1997-11-11 02:28:58 +00:00
drochner
a06997e6bd
Replace the (slightly broken) check to avoid double mounting of
...
filesystems by a correct one. (too bad that there was no agreement
about a mount option doing the same...)
Introduce a new rc.conf variable to mount user-defined filesystems
early in startup (eg for syslog, crashdumps, ...).
1997-10-10 09:37:54 +00:00
lukem
cb57cd9636
add $ipmon and $ipmon_flags, to control startup of ipmon(8)
1997-10-07 12:11:48 +00:00
mrg
4902b56931
turn off lpd by default.
1997-10-06 14:10:22 +00:00
bouyer
8f21e932b0
Typo in comments: netstart uses /etc/defaultdomain, not /etc/domainname.
1997-09-15 11:42:26 +00:00
cjs
26d1975b33
Add -l option to inetd.
1997-09-07 19:13:50 +00:00
veego
fb251b85eb
Only start programms which we started in the previous version (1.15)
...
and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 10:22:24 +00:00
cjs
c3b0e18db8
Split rc.conf variables for starting programs into two: an on/off
...
switch and a set of flags. Get rid of DEFAULT flags entirely. Print
warnings if on/off switches are not set, or are set incorrectly.
Add a shell function to simplify this on/off switch testing.
1997-08-29 02:24:04 +00:00
perry
2a376043c7
add apmd to /etc/rc and /etc/rc.conf per Lennart Augstsson in pr 3313
1997-08-03 22:24:20 +00:00
phil
779c94c7af
Allow routes to be flushed in netstart (rc.conf option, default YES).
...
PR 3228.
1997-07-22 18:41:08 +00:00
lukem
54e2fe6d7e
provide empty settings for $hostname, $domainname and $defaultroute,
...
with comments indicating alternation locations for info
1997-05-12 11:33:31 +00:00
mikel
1e90223347
ntpdate is not a daemon, and add comment for kerberos_server
1997-05-12 05:00:13 +00:00
cjs
0dd1ac7fc9
Make xntpd put its pid in /var/run/xntpd.pid.
1997-05-11 05:08:16 +00:00
perry
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00