3e1606a4b5
PR/9390: Jarkko Torppa: Routed leaks memory when route addition fails.
2000-02-11 18:39:02 +00:00
04a9ed5842
Revert last change, it was caused by the build not picking the
...
right files if DESTDIR is set.
2000-02-11 16:14:32 +00:00
e597c0a106
s/STRIP/STRIPPROG/
2000-02-11 15:36:25 +00:00
565f0151c5
Note the "RAID" partition type.
2000-02-11 02:05:28 +00:00
e203cf81c5
Add reference to the include file with TCP sysctl constants. Fixes bin/9378.
2000-02-09 09:14:52 +00:00
787fb293d3
fix include file path.
2000-02-06 11:12:40 +00:00
bf004f04e9
Document KERN_LOGSIGEXIT.
...
sort sysctl variable list in sysctl.8
2000-02-06 07:31:23 +00:00
3fb18954ab
- The -B flag should be followed by logical segment size.
...
- Remove unnecessary comma at the end of SEE ALSO list.
2000-02-05 11:57:30 +00:00
c539ff5d84
STRIPPROG -> STRIP
2000-02-01 06:00:35 +00:00
a6cfc0a168
note that ifconfig delete does not work for IPv6
...
this is intentional - IPv6 assumes multiple addresses on an interface,
and it is not very safe to "delete" arbitrary one. -alias with
explicit IPv6 address works fine.
2000-01-31 18:02:01 +00:00
809b9a5822
add "nwid" directive.
...
XXX there are too many flags that are not listed in usage().
what should we do?
2000-01-31 17:22:28 +00:00
6079ffd98c
mention that hpcmips and arc use `d' as RAW_PART.
2000-01-31 16:02:43 +00:00
3c7d51f177
- use MBR partition table also on arc.
...
- use defined(USE_MBR) instead of defined(__i386__), like hpcmips and arc.
2000-01-31 16:01:06 +00:00
07a6bcdde4
Build fdisk also on arc
2000-01-31 15:54:48 +00:00
62e82d7e0c
sync with latest libipsec and kernel.
2000-01-31 14:24:23 +00:00
5db82fea81
Byteswap the group descriptors fields as well. Works again on big-endian
...
systems.
2000-01-31 11:40:12 +00:00
03df73abb2
reorder long descriptions for arguments to be in alphabetical order.
...
XXX: shouldn't 'enable' and 'disable' for -n be marked up in some way?
2000-01-28 19:51:34 +00:00
54a73269c2
Updates for ext2fs revision 1.
2000-01-28 17:19:36 +00:00
09d4663f6e
Correct bogons in filetype option support, and add support for the
...
sparse_super option.
2000-01-28 16:01:46 +00:00
aace28c12e
Fix PR9282: restore doesn't print dump header on dumps from host with
...
unset hostname.
2000-01-27 15:25:00 +00:00
5fb6bc4e18
First cut at ext2fs rev 1 support (as of mke2fs 1.18): supports the filetype
...
option read/write and the sparse option read-only.
2000-01-26 16:21:31 +00:00
3d237fafa8
Fix a buglet that caused media-specific options to *always* be printed, even if
...
they were not set.
2000-01-25 06:11:25 +00:00
409e9f1b38
Fix a logic buglet in status printing code.
2000-01-25 02:16:57 +00:00
efe1032de0
- Print 802.11 status (i.e. network ID) after mtu, etc. but before
...
protcol addresses.
- When searching for status bits, use the currently selected media type,
not the currently active media type.
2000-01-25 01:46:57 +00:00
98ac9f3fdb
Update copyright.
2000-01-25 01:03:21 +00:00
4e10c0202f
Make display of media status information (e.g. carrier, etc.) table-driven
...
and easily extensible (by merely adding to the tables in ifmedia.h).
2000-01-25 00:59:39 +00:00
2377e11b8d
allow setting (and reporting) nwid for ieee 802.11 devices.
2000-01-24 23:24:16 +00:00
9e4fad9efa
Fix a bug in get_media_options() which wasn't caught with global options;
...
make sure we only return option bits.
2000-01-24 22:31:27 +00:00
78798f9991
it's -> its
2000-01-22 14:48:43 +00:00
c6a14eb15d
Remove bogus declarations of "errno", "optind" and "optarg".
2000-01-22 10:01:41 +00:00
f5d7100e26
Nuke `extern int errno;' in code we compile with -Wstrict-prototypes. We get
...
the correct definition from errno.h.
2000-01-21 17:08:33 +00:00
01dd896ae9
Fix tyop pointed out by Simon Burge. Also expand description
...
a little, and change words to suggest overlay is a starting point for
layers which need to overlay the over-mounted fs.
2000-01-20 23:59:46 +00:00
ad4e686817
Rename lfs_ifind so that it does not conflict with new kernel prototype.
...
Addresses PR #9253 .
2000-01-20 21:32:31 +00:00
9f1512654d
Add mount_overlay.
2000-01-20 19:22:08 +00:00
3809e348e0
Fix data comparison to not overrun array bounds.
2000-01-20 01:04:41 +00:00
88d28e9b98
Fix frag -> fsize typo
2000-01-19 21:27:08 +00:00
43a7fde6d9
newfs_lfs now recognizes a zero p_sgs field to mean "use the default segment
...
size" (for consistency with bsize/fsize, and since segment size == block
size is never a valid combination).
Updated the man page to include explicit reasonable values for fsize, bsize,
and sgs, at suggestion from Hubert Feyrer.
2000-01-18 21:57:59 +00:00
f1dfdc6927
disklabel now understands the p_sgs partition field (shift to compute
...
segment size from block size).
newfs_lfs now reads the disklabel to find segment, block, and fragment
sizes. Because reading this info from the wrong fs type could result in
very poor fs layout (e.g. ffs has "16" where the segshift would go,
resulting in 512-*megabyte* segments for 8K blocks), newfs_lfs refuses
to create a filesystem on a partition not labeled "4.4LFS".
Man pages for newfs_lfs updated to reflect this change.
2000-01-18 00:02:28 +00:00
2a09ca64fd
Added sysctl examples (read-only sysctls for now)
2000-01-17 07:22:45 +00:00
4760c9fa1b
Fix bug where NULL pointer wasn't checked before dereferencing
2000-01-17 07:21:54 +00:00
417d43539a
Remove unneeded syslog() at unmount
2000-01-17 07:21:25 +00:00
fc838249f5
don't install /usr/sbin/sysctl (backward compat symlink)
2000-01-17 04:22:59 +00:00
3ea807c958
move sysctl to /sbin/sysctl. symlink from /usr/sbin/sysctl
...
is supplied for backward compatibility.
add /sbin/sysctl to base/mi (does not remove /usr/sbin/sysctl
as we have a symlink)
2000-01-17 02:36:31 +00:00
0af5938ca4
Moved from usr.sbin/sysctl/sysctl.c,v
2000-01-17 02:32:06 +00:00
c71990b060
Moved from usr.sbin/sysctl/sysctl.8,v
2000-01-17 02:31:50 +00:00
7c02ef5347
Moved from usr.sbin/sysctl/pathconf.c,v
2000-01-17 02:31:14 +00:00
6b2ed69e4e
Moved from usr.sbin/sysctl/Makefile,v
2000-01-17 02:30:18 +00:00
5471344299
Document the proper fstype for LFS. (If the "default" 4.2BSD is used,
...
newfs_lfs runs fine, but I get hangs when writing to the disk)
2000-01-16 00:44:59 +00:00
0d39e62e79
Fix security problem noticed by Alaric Williams:
...
when giving up root credentials, I was setting the egid and euid,
and forgot to also do gid and uid.
2000-01-15 06:21:40 +00:00
902637d2e4
swapctl(SWAP_OFF, ...) now works.
2000-01-13 12:11:30 +00:00
4aafeffb6f
implement netmask slash notation for IP and IPv6 addresses
2000-01-12 10:29:35 +00:00
e5b5b86865
Nuke a debugging printf that I forgot to remove before last commit.
2000-01-09 03:06:35 +00:00
8ceded3101
Add '-DSAVEBOOTAREA' to keep MBR partition information
...
when NetBSD partition starts at sector 0.
Closes PR:port-hpcmips/9146.
2000-01-09 02:45:43 +00:00
c714a07d22
- add '-v' (Verbose) option, which, most notably, provides
...
a spiffy lukemftp-inspired progress bar for parity re-writing,
reconstructs, copybacks, et al.
- make 'raidctl -P' wait until the parity has been updated before exiting
(it waited previously, but only because the parity re-write ioctl wouldn't
exit until the parity was successfully re-written)
2000-01-05 03:02:41 +00:00
1d4f533c98
avoid use of kvm, mostly for boot floppy's convenience.
...
(sync with latest kame)
1999-12-31 19:40:19 +00:00
d2f02dc8e3
remove a leftover debug message
1999-12-21 16:54:16 +00:00
35b8613acb
change "millisecond" to "microsecond" for headswitch and track seek
...
comments, to resolve PR 8189. This makes the documentation for these
fields consistent. Not that it matters - a grep of syssrc shows that
these fields aren't actually used for anything and should probably be
GC'd.
1999-12-20 18:19:18 +00:00
685376cc7b
Rework the manpage to be a bit more pleasing to read
...
BUGS section is gone, the facts are stated in the paragraph about
support for writing.
also note that NetBSD 1.5 is the first release supporting NTFS
1999-12-17 14:43:07 +00:00
dfa0f92f2e
Use '$' instead of '-' to select remainder of disk interactively
1999-12-17 13:06:49 +00:00
669feec4e3
When setting size of partitions interactively allow '-' for remainder of disk
1999-12-17 12:30:02 +00:00
c40b88c33c
add reference to RFC, and some more DESCRIPTION.
...
sync with latest KAME document.
1999-12-15 05:02:39 +00:00
5979fc87e0
provide -S for source address specifier.
...
enable KAME scopeid hack.
cleanups in node information query.
(sync with latest KAME)
1999-12-13 15:25:59 +00:00
5f036cce1d
bring in KAME scopeid hack. always show scopeid if it is scoped.
...
sync with latest KAME.
1999-12-13 15:24:45 +00:00
c1936bfd69
- ARGH /brick fvdl
...
- Put back the change from revision 1.31
1999-12-12 23:53:26 +00:00
b9cc391094
prepare -DKAME_SCOPEID for extended scope id printing (commented out)
1999-12-12 11:44:53 +00:00
d9a742bd0d
improve debugging functionality.
...
(sync with latest KAME)
1999-12-09 15:08:33 +00:00
a338a0d47b
add reference to "inet6" family.
...
document -alias.
1999-12-09 01:28:25 +00:00
e0a29d2563
Read-only mounts should not start cleaning processes. Make it so.
1999-12-08 22:39:25 +00:00
b1e0f0ad47
usage(): wrap lines so that they don't exceed 80 characters
1999-12-05 18:14:11 +00:00
f816cfa0ca
don't make "-prefixlen 64" a default in -inet6 case. the past behavior
...
was not compatible with past practice ("route get" did not work right).
sync with recent KAME.
1999-12-03 05:43:00 +00:00
535e7106d2
rcsid police
1999-12-03 02:13:55 +00:00
15ca2512dc
Add a missing '\n'.
1999-11-28 20:03:17 +00:00
5f534fca77
allow changing partition info from inside the interactive handler.
1999-11-26 06:03:09 +00:00
e93b1a89ec
we are rcorder.8 now.
1999-11-23 05:50:08 +00:00
d246ccddbb
move rcorder to sbin.
1999-11-23 05:28:15 +00:00
2ecd102f59
Make usage message match actual options.
1999-11-21 00:53:58 +00:00
3a73fcfff7
Include clues on what to do with the crash dump once you've got it
1999-11-20 19:57:01 +00:00
1152720a07
add newbtconf (missed by darrenr)
1999-11-20 00:04:48 +00:00
ebf003eaf4
Typos (from OpenBSD)
1999-11-19 22:48:01 +00:00
a1d8cb9593
Ignore RTM_OIFINFO messages (send by a COMPAT_14 kernel).
1999-11-19 10:46:35 +00:00
7b962c3e98
Keep SEE ALSO list in alphabetical order.
1999-11-19 01:47:13 +00:00
f4642e590c
Use .Ar macro for the files to be extracted.
1999-11-19 01:38:54 +00:00
82d7115cf2
Don't pass so many args to .Nd macro. It just overflows.
1999-11-19 01:12:39 +00:00
f6bf35c814
fix lp64 lossage.
1999-11-17 00:29:54 +00:00
3fdb4d7b11
If we didn't print an open paren, no need to print a closing paren
...
(by backing out part of previous commit).
1999-11-16 11:53:17 +00:00
f6356db85f
Fix typo.
1999-11-15 20:53:56 +00:00
f2651c65ac
Fix %d <-> long mismatch.
1999-11-15 20:31:51 +00:00
b154796d0f
Update for soft updates code.
1999-11-15 19:22:22 +00:00
60f82a22ae
Print softdep information. Also print sync+async writes in verbose mode.
1999-11-15 19:20:58 +00:00
5a92829791
Update for softdep code.
1999-11-15 19:19:41 +00:00
a905c40444
Changes for softdep code.
1999-11-15 19:18:24 +00:00
43df09c3a7
If we changed the sample rate or resolution, then say so.
1999-11-15 13:47:30 +00:00
6b374311ba
Allow setting mouse resolution and sample rate.
1999-11-11 18:29:40 +00:00
3bc4cec200
allow to set multiple keyboard "variants" simultanously.
...
Follows PR kern/8456 by Michael Eriksson <eramore@era-t.ericsson.se>,
implemented diffently.
1999-11-10 16:49:38 +00:00
85cbf55d16
Since our gcc doesn't warn about NULL format strings anymore, we can
...
fix the incorrect err(1, "%s", "") et al.
Closes PR bin/7592 by cgd.
1999-11-09 15:06:30 +00:00
f52d155148
Make newfs_lfs try increasingly smaller segment sizes down to 2*block size,
...
if the partition is so small that not enough segments can be created to
place the second superblock. Addresses PR#7623.
1999-11-05 18:59:12 +00:00
a5e1bf5368
Display local address associated with route (if any) in "route get".
1999-11-01 13:32:38 +00:00
7c282714fa
Fix typo.
1999-11-01 02:30:58 +00:00
7bf4e6a5e3
exect->execve.
...
During my investigation, no reason could be found to enable tracing.
Fixes PR 7782 by Christoph Martin.
1999-10-31 13:24:05 +00:00
94872b2ccd
Sync with scsictl: rearrange usage() and print list of commands.
1999-10-29 23:07:43 +00:00
3d346bb5e5
Increase the format timeout to 6 hours.
1999-10-27 22:29:06 +00:00
522cbf0248
Update to match new SVR4-style definition names in <sys/exec_elf.h>.
1999-10-25 13:55:06 +00:00
6129fbed1e
Fix pastos.
1999-10-19 10:35:37 +00:00
7a8dbc6aa3
Fix typo. ('_i386__' -> '__i386__')
...
Pointed by D'Arcy J.M. Cain, thanks.
1999-10-12 00:36:17 +00:00
dbbe49c38f
bail if the source config doesn't exist as a directory
1999-10-11 12:45:43 +00:00
39a8a0436e
add hpcmips support (MBR)
1999-10-11 05:28:04 +00:00
92bd305e4a
Add note that "fdisk -i" is the same as "fdisk /mbr" on MSDOS.
1999-10-11 01:04:57 +00:00
5db156a589
NFS over TCP is more common these days.
1999-10-07 23:50:58 +00:00
e38cd9f79b
import script to setup directories for maintaining separate boot configs.
1999-10-05 11:22:43 +00:00
f6624fbbee
Make `reassign' actually work.
1999-10-04 17:10:56 +00:00
2763cc1921
Working version of aborted dump{,_lfs} join.
1999-10-01 04:35:21 +00:00
ac8f2f8282
Undo broken dump{,_lfs} changes, part 2.
1999-09-30 21:06:57 +00:00
e8247b4092
Back out changes made on the 29th, not at all the changes I intended to commit.
...
(I don't know how I did it though ... I'll figure it out tonight.)
I'll reapply this, in a working form, this evening.
1999-09-30 20:39:58 +00:00
54fd3dd508
Adapt dump(8) to use filestore-independent (but still ufs-specific)
...
replacements for NINDIR, fsbtodb, etc. Create dump_lfs by adding a few
LFS-filestore-specific routines. As described in PR#8317.
1999-09-29 04:57:48 +00:00
2829eb17d7
Make `all' a synonym for the `any' keyword.
1999-09-28 23:32:04 +00:00
3e19888633
Note that proc.<pid>.corename susctl node is read-only at securelevel >= 2.
1999-09-28 14:56:04 +00:00
d758f82f45
Oops, needs an operator.
1999-09-25 04:27:55 +00:00
cd2531c01e
Build fdisk also on hpcmips.
1999-09-25 04:26:28 +00:00
62d623bfc4
Don't decend into the subdirectory mbr_bootsel except i386,
...
since it currently doesn't contain MI thing and not compile
on ofppc box (thanks Wolfgang) and probably on bebox box.
1999-09-25 04:18:20 +00:00
2bb88f2837
Fix tyop and clean up usage of commas a little.
1999-09-21 12:09:25 +00:00
10078c4c8b
don't unbalance { } pairs with #ifdefs or ctags(1) gets confused
1999-09-17 18:30:33 +00:00
942ecedabb
Clarify description of ``-c''. (See PR 4511)
1999-09-17 10:20:01 +00:00
03126e1c99
Use full month names with .Dd, as per mdoc.samples(7).
1999-09-12 18:47:10 +00:00
1e99130f2e
Use unixish term "hole" instead od "sparce" (which looks like it
...
should be "sparse" anyway).
Noted by Soren Jorvang <soren@NetBSD.org>.
1999-09-07 08:16:13 +00:00
b49886ea7a
Update usage().
...
Prevent buffer overflows when configuring boot selector.
Cycle through partitions when entering boot names.
Use '<UNUSED>' consistently.
Reviewed by: fvdl
1999-09-06 23:58:59 +00:00
0e578b8b02
make sure that we don't try to allocate negative memory when blks == 0.
1999-09-06 19:52:28 +00:00
b755b885d5
Accept 'Y' for label disk as well as 'y'
1999-09-05 07:27:55 +00:00
50aa8b2b93
use daemon(3) instead of vanilla fork()
...
use err(3) instead of perror..exit
add new flag: -n don't detach from tty
1999-09-03 13:31:29 +00:00
143f897d3d
-n don't detach from tty
1999-09-03 13:29:44 +00:00
8ce82eb757
sbin/rtsol now shares source code with usr.sbin/rtsold.
...
sbin/rtsol is compiled separately for static linkage.
1999-09-03 05:25:43 +00:00
0a69640f14
remove false fix for routing socket align issue.
1999-09-03 04:17:19 +00:00
65b4964f1e
fix alignment issue in routing socket data, on 64bit arch (i.e. alpha).
...
sockaddrs are packed with ROUNDUP() in sys/net/rtsock.c so userland
programs needs to follow that.
PR: 8179
1999-09-03 03:47:39 +00:00
d9c745bf82
"-l" means _don't_ log to syslog(3).
1999-08-19 13:43:27 +00:00
ebe496e30c
negative ip octets don't make sense. Now we print byte swapped but the
...
addresses are at least recognizable without negating :-)
1999-08-19 05:12:38 +00:00
9c56c84e7b
printf() format warnings for size_t != int; from Peter Seebach in PR bin/8214.
1999-08-17 15:05:15 +00:00
15e449f40e
Initial support for rfilter and wfilter namespaces, in pt_filter.c.
...
Also, recur into ./examples, to grab the tutorial and example configurations.
1999-08-16 06:55:27 +00:00
854e99c51a
Initial checkin. Contains some tutorial-like examples, plus configurations.
1999-08-16 06:42:48 +00:00
ac273e7f35
Changes include:
...
- user mounts of fs namespace are now possible.
- if read/write access is not possible, fall back to read-only.
- use lose_credentials() as a common method to change UID etc.
(it is also used by the rfilter and wfilter code)
- some KNF changes, while I was here.
1999-08-16 06:38:12 +00:00
5abfdc83cb
Make life a little easier: warn if the configuration file is not an absolute
...
path, and under DEBUG, keep stderr around.
1999-08-16 06:34:50 +00:00
b2af35bc2d
rf_MakeConfig succeeds only if it returns 0, not if it returns
...
values 0 or greater.
1999-08-15 03:18:19 +00:00
225f5a8b60
Display the parity status as part of the status ('-s') display.
1999-08-15 03:15:00 +00:00
89fa8aef99
Clarify usage message.
1999-08-13 21:12:18 +00:00
21521cffe4
Sync with sys/disklabel.h
1999-08-13 10:23:39 +00:00
67e8cf0262
No need to include rf_sys.h.
1999-08-13 03:37:42 +00:00
ae6f518821
Garbage-collect CCDF_SWAP; no longer used, and doesn't make any sense
...
with the UVM swap code.
1999-08-11 02:44:35 +00:00
d0740fb357
Add two more options to raidctl:
...
-p check (and return) the status of the parity
-P check the status of the parity, and rebuild if necessary
Addresses PR#7494
1999-08-10 18:21:39 +00:00
cbac3515fc
xref mount_ntfs(8) in SEE ALSO
1999-08-08 04:40:18 +00:00
180bbfd871
Move two functions from rf_strutils.c into rf_configure.c, removing
...
the need for rf_strutils.c.
1999-08-07 23:48:11 +00:00
fac3e3fdcf
* put new BUGS section instead of CAVEATS, which explicitely warns NTFS
...
is experimental and should be used with extreme caution
* give credit to christos & me for the NetBSD port
1999-08-05 15:45:01 +00:00
95d53bad01
Fix PR7747: umount -R dumps core
...
(fix by Ronald Khoo from PR applied)
1999-08-02 02:40:38 +00:00
c71139914f
s/on device/in [dirname]/, to be a bit clearer...
1999-08-02 00:33:01 +00:00
398c91fa04
Adjust column-sizing code to keep output in 76 character lines, so output
...
doesn't wrap in sysinst.
1999-07-30 17:44:01 +00:00
6205a5ed9e
don't use the result of a readdir() after closedir(), from
...
Christian Groessler per PR bin/8107
1999-07-30 15:56:58 +00:00
958ed46f74
Collect all little usage-messages spread around into one place,
...
and as a side effect, print the available commands (and their
usage) if no command is given on the command line.
Approved by Jason Thorpe.
1999-07-30 02:29:04 +00:00
76a67357f0
fix alignment problem of SIOCGIFCONF, on 64bit arch.
1999-07-29 15:40:48 +00:00
47a0fd892a
sync with recent KAME.
...
- warn if net.inet6.ip6.accept_rtadv=0 (the command has no use in this case)
- conformance to RFC2461: obey declared timing constants more strictly
1999-07-29 09:57:58 +00:00
fbff06b0ef
Replace the existing version of nologin(8) with a rewrite that was done
...
according to the behaviour documented in the manual page. That way, the
copyright notice can be dropped.
I place the rewritten version into the public domain. Fixes PR 5784.
1999-07-27 03:56:13 +00:00
c483de17ca
Make the previous actually compile.
1999-07-26 19:38:36 +00:00
0717bdfdf2
cleanup error message
1999-07-26 12:00:47 +00:00
870447b902
don't allow destination addresses to be set for non-Point-to-point interfaces
1999-07-26 11:56:55 +00:00
6b8e92147e
after determining the size of a file being used as a msdosfs, seek back to
...
its start so subsequent writes go to the right places.
1999-07-26 00:28:57 +00:00
30353dfe38
s/makeing/making/ (in a comment)
1999-07-25 05:53:01 +00:00
eda6e4cca4
Address PR bin/7623: if the filesystem is so small (or segment size so large)
...
that not enough segments are available for the second superblock, or to have
MIN_FREE_SEGS free for work room for the cleaner, newfs_lfs will now exit
with an error.
1999-07-22 20:14:29 +00:00
a335a76e3b
s/atoi/strtol/ and check if argument given to -i was really a valid
...
number.
Patch submitted in PR 6456 by lha@stacken.kth.se
1999-07-22 02:04:13 +00:00
03f1e83295
Try $TMPDIR before resorting to _PATH_TMP.
1999-07-21 17:56:34 +00:00
01ec1d5609
Don't try to play games with the BSS; just make it work.
1999-07-21 03:32:53 +00:00
b1e9d43575
Add description of /proc/#/cmdline to mount_procfs.8.
...
Closes PR misc/8021.
1999-07-19 08:02:07 +00:00
9e2ce6114e
tweak IPv6 case so that "route show" does not truncate numeric IPv6 address.
...
PR: 7955
1999-07-17 06:51:27 +00:00
ea4e0f4bc9
- don't core-dump if hints file is too short
...
- unmap the space and close fd's
- bcopy -> memcpy
- stat the file to get the size to map, instead of doing multiple mmaps.
1999-07-16 22:23:29 +00:00
7fa6616468
Address PR 7412: fix newfs_lfs.8 to list all real options for newfs_lfs;
...
also fix newfs_lfs to get rid of all sorts of useless options that applied
only to newfs_ffs. Corrected reference to the FFS paper to the reference
to the BSD-LFS paper.
1999-07-15 19:09:40 +00:00
138dd70b28
From PR-7951 by Joachim Kuebart:
...
Add support for Microsoft Joliet long filename extensions to the
cd9660 filesystem.
1999-07-13 11:12:49 +00:00
d4aa58bc6c
avoid using constants, use #define'd values.
1999-07-12 20:46:15 +00:00
5c0a411355
do not modify BINGRP as there's no reason for.
...
From: tsubai@netbsd.org
1999-07-12 19:02:04 +00:00
8c46b24007
correct typo. s/LDADD/DPADD/
1999-07-12 19:00:52 +00:00
7c564a9ce6
Update to new mount arguments.
1999-07-08 03:04:39 +00:00
dd514ad75e
Incorrect integration. ctime takes a time_t value, not a long.
1999-07-06 23:15:48 +00:00
d1d8f0f73c
do not pass NULL to errx().
...
From: Chris Joness <cjones@rupert.honors.montana.edu>
1999-07-04 15:24:35 +00:00
4cd93a1723
do not bark even if ipsec policy setting for "route flushing 127.0.0.1"
...
ping socket is not successful. it usually means that the kernel is
not ipsec ready, and in that case this should be just okay.
1999-07-04 13:27:03 +00:00
b7ee9c3863
add NetBSD RCS ID.
1999-07-04 02:43:39 +00:00
fab76c80cf
be friendly with non-IPsec kernel.
...
don't exit even if ipsec policy config fails.
1999-07-04 01:11:23 +00:00
9d343b25ca
RCS Id police.
1999-07-03 19:55:03 +00:00
8bfcc5ad34
Add a new -s option to make it easier to test the link-level status
...
(i.e., 10baseT carrier/no carrier) of an interface from scripts
ifconfig -s <interface> will exit with a false status if the interface
reports its unconnected.
-s also works in conjunction with -l and -a, filtering out interfaces
which are reporting down.
Also, add -b (which shows only broadcast interfaces with -l and -a).
I find these options useful in network autoconfig scripts for mobile
systems.
1999-07-03 17:31:15 +00:00
19b055d5a7
0 -> STDIN_FILENO
1999-07-03 15:09:51 +00:00
9a6abc8c5d
s/CFLAGS/CPPFLAGS/ for -D and -I.
1999-07-03 06:26:25 +00:00
c04f585990
stop using __RCSID from UCB comment.
...
Hope this fixes PR 7892.
1999-07-02 17:52:36 +00:00
8ecadeaecd
Build fdisk on bebox and ofppc(replaced powerpc).
1999-07-02 17:48:26 +00:00
565fad43fa
write up IPv6 operations (prefixlen and others)
1999-07-02 15:45:46 +00:00
d211125175
IPv6-ready route command (-inet6 and -prefixlen are added)
1999-07-02 15:29:02 +00:00
8f071200a3
rtsol: Throw IPv6 router solicitation to request autoconfiguration
...
(to be used on end host).
1999-07-02 08:28:04 +00:00
909714f4a5
IPsec support (specify policy on ping - quite useful to test
...
if IPsec is working or not) is added.
1999-07-02 04:53:23 +00:00
011b182801
Fix some printf format problems.
1999-07-02 00:19:44 +00:00
e7d046463f
-D... belongs in CPPFLAGS
1999-07-02 00:04:53 +00:00
62d68abdad
Fix LP64 printf format problem.
1999-07-01 23:59:11 +00:00
bad54b26c6
enable -DIPSEC.
1999-07-01 20:19:35 +00:00
68ad03fe5d
ping for IPv6. try
...
ping6 ::1
on you node.
1999-07-01 19:59:59 +00:00
125cb421d5
Note the default tape device is taken from _PATH_DEFTAPE in /usr/include/paths.h
1999-07-01 19:18:47 +00:00
25eb444e29
make ifconfig IPv6-ready.
...
TODO: update manpage for new options.
1999-07-01 13:19:20 +00:00
fb88e47b54
Remove an extraneous fclose() call which would cause savecore to crash
...
if the bounds file was unwritable (e.g. because /var was read-only).
Fix supplied by Ronald Khoo in PR#7887.
1999-07-01 08:53:35 +00:00
7fe5a79110
Flesh out the manual page, add an examples section, and correct some of the
...
English.
1999-06-28 21:48:13 +00:00
f6e78dac05
Default device is nrst0 not rst0
1999-06-28 01:32:49 +00:00
8847804fc3
Regularize error reporting of mount_* commands for failure of mount(2)
...
to the form:
mount_xxx: dev on dir: reason for failure
1999-06-25 19:28:35 +00:00
9e91c8ebd7
Use ufs_daddr_t instead of u_long, so non-32-bit architectures can clean seg 0
1999-06-24 16:45:14 +00:00
6c3d02c865
Support for ping -a: beep when packet received.
...
Slightly tweaked from version submitted by andrew@untraceable.net in PR7815
1999-06-19 19:15:22 +00:00
3787c5c3d8
MAP_COPY -> MAP_PRIVATE
1999-06-17 21:09:47 +00:00
72a64c5437
add ELF support, mostly from joda@pdc.kth.se (Johan Danielsson) in PR#6149,
...
updated for the symtab support for a.out (non for ELF yet) and other cleanup
by myself. should work on the alpha as well as other ELF ports...
remove the ld(1) output by default, rather than leaving little binary turds
across the filesystem...
1999-06-13 12:54:40 +00:00
bb880545b1
Fix a typo.
1999-06-12 17:17:16 +00:00
eb2854e11b
Use pidfile(3).
1999-06-06 02:00:32 +00:00
a895e91016
Make BSDLFS a EXT2FS-like filesystem, that is, dont print or parse the cpg
...
field.
According to disklabel.h, its LFS semantics are "segment shift" (log2(segment
size)), but in the code it is used nowhere, and there are even plans to
allow non-poweroftwo segment sizes, so it won't ever work.
While at this, simplify the disktab-like output routine... here, currently,
BSDFFS, BSDLFS, EX2FS and ADOS do the same, so don't duplicate the code.
1999-06-04 19:02:34 +00:00
7d344bb51b
Make sure the boot selector actually gets updated if you only change
...
the timeout and/or the default menu choice.
1999-06-04 18:59:15 +00:00
37cb96a063
Print bsize and fsize in disktab-format output also for LFS and ADOS.
1999-06-03 21:15:49 +00:00
85270790c6
Print/parse block size, fragment size and cpg for FS_BSDLFS and FS_ADOS.
...
(cpg has different semantics for LFS and ADOS, but is in use.)
XXX The disktab reading/disktab format output writing needs still to be done.
1999-06-03 20:59:04 +00:00
50f0c49606
On NetBSD/alpha, go out of the way to read the boot area's contents if -r
...
is specified, so that the boot blocks aren't clobbered when writing labels.
1999-06-03 01:58:51 +00:00
a54ad4c40d
kill some bogus comments about -r: it _does not_ cause the boot area to
...
be clobbered. since 4.4-Lite(?) disklabel.c has gone to extra effort
to avoid clobbering the boot area when using -r, but the 4.4-Lite manual
pages were apparently not updated to note that!
1999-06-03 01:49:58 +00:00
9526bd4df7
Patch for PRs 5124, 5535: correctly interpret the gid mapping file, rather
...
than using the last uid map entry for every gid map entry.
1999-06-01 19:16:49 +00:00
3d882ef79b
Remove non-existant option -t from usage.
1999-05-28 10:10:25 +00:00
6f14acdddf
If -c not set on command line and the partition has a non-zero cpg
...
value, use it for the number of cylinders per group. So now the value
in the disklabel does something. :-)
1999-05-19 00:25:59 +00:00
e9d0bd756d
Fix a slight braino in last.
1999-05-18 18:01:08 +00:00
7d4047e4bc
Use the system search path for ntfs headers.
1999-05-17 16:44:53 +00:00
52971adece
Don't force `inet' on status display; get all address families that have
...
configured addresses. From Jun-ichiro itojun Hagino, PR #7593 .
1999-05-17 16:00:05 +00:00
64a1f3885d
Add NOTES section. Indicate that fstype in disklabel should be set to 4.2BSD.
1999-05-16 20:58:49 +00:00
6735cc1a4c
Make newfs's spare superblock output nicer. Figure out how wide the
...
largest block number will be, and make the columns wide enough for it. Then
make enough columns to fit in an 80 character window.
Samples: small end & faked up values:
super-block backups (for fsck -b #) at:
32, 176, 272, 416, 512, 656, 752, 896, 992, 1136, 1232, 1376, 1472,
1616, 1712, 1856, 1952, 2096, 2192, 2336, 2432, 2576, 2672, 2816, 2912, 3056,
3152, 3296, 3392, 3536, 3632, 3776, 3872, 4016, 4112, 4256, 4352, 4496, 4592,
For a 155 GB fs we have:
super-block backups (for fsck -b #) at:
128, 65792, 131456, 197120, 262784, 328448, 394112,
459776, 525440, 591104, 656768, 722432, 788096, 853760,
919424, 985088, 1050752, 1116416, 1182080, 1247744, 1313408,
1379072, 1444736, 1510400, 1576064, 1641728, 1707392, 1773056,
...
317462144, 317527808, 317593472, 317659136, 317724800, 317790464, 317856128,
317921792, 317987456, 318053120, 318118784, 318184448, 318250112, 318315776,
318381440, 318447104, 318512768, 318578432,
Now it actually looks like someone's thought about making large fs's. :-)
1999-05-14 22:36:50 +00:00
17371dd632
Make this compile...
1999-05-06 16:08:54 +00:00
0dd3286354
Add mount_ntfs
1999-05-06 16:05:26 +00:00
67e9632a62
Import yesterday's FreeBSD mount_ntfs source
1999-05-06 16:05:21 +00:00
3a1d0ae5c7
Avoid byte overflow in block estimate for large files
1999-05-05 16:53:46 +00:00
563aff8153
Add a 'chain' command in interactive mode that allows you to vary the
...
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
1999-05-03 09:45:01 +00:00
6a2c64449b
Sanity check the drive number in %dl and use it instead of blindly
...
assuming disk 0.
1999-05-02 13:48:30 +00:00
7d18a1432b
Tighten check for bad drive numbers to avoid passing garbage to the
...
2nd stage loader.
1999-05-02 12:20:01 +00:00
c0042f7871
Because of space constraints, error messages got shortened. Reflect this
...
in the manual page.
1999-05-02 12:18:40 +00:00
cbf8e59c01
Make check if we need int13 extensions for the bootselector more correct.
1999-05-02 12:17:48 +00:00
5a48cda98a
Remove confusing entry about cylinder boundaries.
1999-05-02 12:17:13 +00:00
255793452f
Since fdisk/mbr contains a man page, we need to descend into it regardless
...
of which ${MACHINE} we are.
1999-05-02 04:42:47 +00:00
69741f8d3d
Fix typo.
1999-05-01 20:04:14 +00:00
855480012b
Invert the meaning of -s, from "don't load symbols" to "load symbols".
...
Document that this is expensive (and why) in the BUGS section.
1999-04-30 18:32:01 +00:00
8eeaf82ae4
- Use the proper multiply instructions so that we don't get truncated.
...
- Fix comparison, which did not work before.
1999-04-30 15:29:44 +00:00
e8dacca7c3
STRICT_ALIGNMENT only applies to the start of partitions, not length.
1999-04-30 04:46:50 +00:00
144e7d3345
Remove duplicate paragraph. Closes PR/7498 by Geoff C. Wing.
1999-04-29 21:53:08 +00:00
e312a3c208
Fix disklabel -t to work with disks that don't end on a cylinder. Before it
...
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.
Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
1999-04-29 19:12:07 +00:00
a6f7895b92
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.
Change the mbr manualpage to reflect some shorter error messages.
1999-04-28 23:27:01 +00:00
2969961420
Allow partitions to extend to the end of the disk, even when
...
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
1999-04-26 02:05:46 +00:00
ae3b9e217c
add a -D line to usage().
1999-04-26 01:02:25 +00:00
4a22f0e03d
Fix entry point parsing if output file specified to modload (PR7352)
1999-04-23 17:47:02 +00:00
6d094b5b76
Copy code across from newfs so that 'fsck sd0a' and similar will work.
1999-04-22 04:20:53 +00:00
fb524f3e3b
one-line copyright message
1999-04-17 17:55:13 +00:00
48c1c25ba5
Make the bootselector configurable by fdisk. Add a -B flag to this
...
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
1999-04-17 01:38:00 +00:00
6299fb0813
Correct nokerninfo tty flag being left set in most error cases.
...
Closes PR/7388 by Dave Huang <khym@bga.com>.
1999-04-17 01:17:15 +00:00
8b4801d18a
change wording slightly.
1999-04-16 23:56:22 +00:00
8920adf7b2
add lmcctl.8
1999-04-16 23:40:52 +00:00
7adcf112ca
Add a manual page describing the MBR and the bootselector.
1999-04-15 22:35:19 +00:00
fa9bff9be1
Add and build a bootselecting MBR (i386).
1999-04-15 22:31:23 +00:00
christos