Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
77,886 Commits 606 Branches 0 Tags 3.1 GiB
93b623b541
Commit Graph

697 Commits

Author SHA1 Message Date
augustss
93b623b541 Extend quirks to 32 bits. Add two new ATAPI quirks, one to 
deal with a bad byte5 of the capacity descriptor, one to
handle devices that lack the flex geometry page.
 2001-03-20 22:39:08 +00:00
explorer
b12c43f70a Only lock the pack in if the disk device is a removable one. This fixes a 
problem with Hitachi SCA drives
 2001-03-09 16:07:39 +00:00
fvdl
b72e6ca276 Add quirks for VMware emulated disks, for NetBSD as a guest OS. 2001-02-26 22:31:27 +00:00
lukem
3aeb5f2f29 whitespace police 2001-02-24 01:59:46 +00:00
pk
672f49bfa2 Turn off command tagging by default for pre-SCSI2 devices. 2001-02-16 22:54:27 +00:00
mycroft
f2d987f8a4 Force certain commands (i.e. DVD authentication) to PIO mode. They are 
explicitly not supported in DMA mode, and generally return an `illegal field
in CDB' error.
This should have been done ages ago.
 2001-01-22 07:00:39 +00:00
kenh
4a962c6cd9 Retry requests if the CD-ROM drive returns the sense code "Device in 
Process of Becoming Ready".
 2001-01-19 22:47:46 +00:00
jdolecek
34c8ae80da constify 2001-01-18 20:28:15 +00:00
fvdl
d040bd5908 Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when 
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
 2001-01-08 02:03:45 +00:00
fvdl
e2d1c1f926 Adapt all disk devices in MI directories to handle ODIOC* calls 
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
 2001-01-07 18:09:01 +00:00
augustss
5806434428 Call vdevgone() with correct minor range. 2001-01-01 18:34:12 +00:00
augustss
2f1e60b46c Support device detach. 
Don't call scanjet_attach() for all HP scanners.
Also, ANSIfy while I'm here.
 2001-01-01 18:28:49 +00:00
ad
2f5cf27275 PR 6402: some SCSI devices use \377 as blank, so adjust scsipi_strvis(). 2000-12-31 17:54:29 +00:00
thorpej
b0c9cd5f7b ALTQ'ify. 2000-12-14 07:27:21 +00:00
augustss
a48cc8927a Don't access (in core) disk label of a removable disk that is not there. 2000-12-08 02:30:51 +00:00
ad
9ecde86321 I2O HBAs provide an abstracted view of the bus; use SCBUSIOLLSCAN to give 
them an oppertunity to re-scan it before we do.
 2000-12-03 13:30:36 +00:00
wiz
972c941cf6 Fix typo in comment reported by Tetsuya Isaki in kern/11587. 2000-11-29 12:49:56 +00:00
chs
f6b62f776c avoid division and remainder operations for devices where 
the sector size is DEV_BSIZE (ie. practically everything).
 2000-11-24 00:17:35 +00:00
soren
a622a1b6d2 Remove obsolete comment. 2000-11-22 00:32:24 +00:00
thorpej
b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
pk
fbf62501af Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only. 2000-11-14 08:52:35 +00:00
pk
8ba559d056 st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select(). 2000-11-03 12:08:41 +00:00
pk
4c7351ec7d * st_touch_tape(): start probing at the block size from the sense data if 
we have it.

* st_unmount(): reset density to the device default. This prevents using
  stale density values after changing to a medium with different density.

  Section 9.3.3 of the SCSI specs states that a device shall return the
  density value specified in the last succesfull MODE SELECT after an
  unload operation, in case it is not able to automatically determine
  the density of the new medium.
 2000-11-03 10:46:18 +00:00
pk
e3aaa6c1ab * Per st(4), retrieving status and setting modes on the control device 
should succeed even if no media is loaded.

* In stopen(), check the return value of st_mount_tape().
 2000-11-03 10:22:02 +00:00
pk
f71476a62f Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects 
an ERASE command with the `Immed' bit on.

Use it on the VIPER 21247 & 21531.
 2000-11-02 13:34:59 +00:00
pk
e4958f1fe6 Prevent printing sense information twice. 2000-11-02 13:12:58 +00:00
pk
9c058471c3 Remove useless check for SDEV_MEDIA_LOADED from st_read_block_limits(). 
This command should work whether or not media is present in the device.
 2000-11-02 00:56:59 +00:00
pk
3867a66a9a * In st_touch_tape(), don't bail out if the MODE SELECT fails since we are, 
after all, probing the device for acceptable parameters.

* In st_loadquirks(), copy mode-specific quirks from the quirk table
  to `st_softc'; otherwise all such quirks save ST_Q_FORCE_BLKSIZE are ignored.
 2000-11-02 00:52:15 +00:00
ad
5df1120c67 Add some more completion status codes. 2000-10-05 11:23:05 +00:00
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(), 
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
 2000-10-01 23:32:39 +00:00
ad
382141e2f7 Add a new, optional method to scsipi_adapter (scsipi_accesschk()), and use 
it when considering whether to attach devices. This is to facilitate
`non-SCSI' RAID controller drivers that want to provide SCSI pass-through
services to the kernel.
 2000-09-22 16:45:17 +00:00
matt
b0c9fcd14a Add a NOPREVENT quirk which prevents the sending of PREVENT messages (some 
manual 9track tapes don't support it).  Add a quirk entry for the NCR H621
9track tape drive.
 2000-08-16 19:22:25 +00:00
mjacob
927f61818e Add "SYMBIOS" processor type to the SDEV_NOLUN category. These are usually 
the GEM chips on a Sun D1000- and they cause Qlogic SBus firmware to blow
chunks if you access past lun 0.
 2000-08-13 00:03:01 +00:00
mjacob
9766fcf2be Don't attempt to actually read SAF-TE temperature objects- nobody seems 
to be obeying the original spec as to what the numeric value means.

Temperature flags are unaffected- these are still the 'pseudo-thermometers'
and overtemp/undertemp warnings will be caught and translated to SES objects
here.
 2000-08-08 22:55:30 +00:00
mjacob
295864adef During probe, use SCBUSACCEL ioctl to adapters that support it to 
enable fast/wide/tagged.
 2000-08-08 22:46:03 +00:00
bouyer
8464bde7e8 If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of 
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
 2000-08-03 23:14:31 +00:00
bouyer
1b00421876 Add quirk entry for NEDICOM CRD-BP2, from kern/10738. 2000-08-03 12:36:08 +00:00
sommerfeld
ed9ce99d8c printf format paranoia 2000-07-08 17:12:08 +00:00
mjacob
b47890a934 Reserve top nibble of status for use by the HBA. It's up to the 
HBA to set or clear it.
 2000-07-06 01:56:23 +00:00
thorpej
cde72a2c2b Garbage-collect __BDEVSW_DUMP_OLD_TYPE. 2000-07-05 23:31:12 +00:00
mrg
261538ecac remove include of <vm/vm.h> 2000-06-28 16:39:25 +00:00
mrg
666116dd21 <vm/vm.h> -> <uvm/uvm_extern.h> 2000-06-28 16:38:37 +00:00
bouyer
12d3bf8c1a Add a callback (*irqack), for controllers that need special action to ack 
the interrupt once it has been ack'd on the drive.
 2000-06-12 21:10:40 +00:00
enami
5a4b9fcbbf Prevent a process being swapped out during I/O if the data buffer is 
allocated on stack.  This potential problem is noticed by Noriyuki Soda
and the idea and sample code to fix is given by Jason R. Thorpe.
 2000-06-09 08:54:19 +00:00
soren
cd4324537d Density codes are usually given in decimal, so print them that way. 2000-06-06 17:16:02 +00:00
phil
d09ecbdf2a Add an entry for the HP ScanJet 6300C. 2000-05-31 23:10:39 +00:00
fvdl
c0f99cc74a Initialize xs_status to 0 after allocating a scsipi_xfer struct. Makes life 
easier for driver debugging.
 2000-05-31 11:14:25 +00:00
augustss
72684ce3ec Add a method, scsipi_getgeom, to the adapter struct. If this method is 
present it will be used to get the drive geometry if the MODE SENSE fails.
 2000-05-31 09:15:48 +00:00
augustss
6b0b8292ff Add NOMODESENSE quirk for TEAC USB floppy. 2000-05-30 15:16:41 +00:00
augustss
61143a446c Add NOMODESENSE quirk for Y-E data floppy (thanks Jason for reminding me). 2000-05-30 01:49:19 +00:00