pk
0c031adc76
Not all v2 proms understand the `mac-address' word (from Theo).
1995-11-14 15:04:01 +00:00
pk
c7d1d39b3e
dk_device => device in controller structure (noted by Jason Thorpe).
1995-11-11 21:12:50 +00:00
pk
c2cd05605d
UFS => FFS conversion.
1995-11-08 09:09:20 +00:00
pk
54ec9fb697
Correct test for sun4 machines (thanks Chuck).
...
Since uname currently does not allow to discriminate different sparc
models, we use `sysctl.hw.cpumodel' to do this somewhat heuristicly:
if the returned strings starts with "SUN4-" a sun4 architecture is
assumed. This information is used to determine whether or not to strip
the a.out header off the 1st-stage bootblocks.
1995-11-07 11:45:24 +00:00
pk
996526aa02
Make error recovery actually work, i.e. don't hang on SCSI bus resets
...
and re-synchronize before re-scheduling pending operations.
Things seem to be a fair bit stabler now.
1995-11-03 16:47:43 +00:00
pk
bbdb422873
Stop DMA before resetting
1995-11-03 16:34:12 +00:00
pk
c0a156c9fd
Map pixels in VME32 space
1995-10-28 23:15:16 +00:00
pk
e4fcc8ab5a
Move DMA chip draining to dmaintr() and drain when a (possibly partial)
...
transfer ends in stead of doing it before starting a new transfer.
Use a different CSR bit to wait for "chip not busy" (may be necessary to
make this conditional on chip revision).
1995-10-24 16:26:54 +00:00
pk
a3f2bf19e4
Various:
...
- make esp_poll() approximate the given timeout value.
- introduce esp_abort(), and use it for timed out commands; make targets and driver less confused.
- make {free,ready,nexus}-list management somewhat more coherent.
- make sure we only proceed down the state machine in espintr()
if there really is an interrupt pending.
1995-10-24 16:03:57 +00:00
pk
dc3c0d7db7
Define VIDEO enable bit (per Jason Thorpe; PR#1672).
1995-10-23 23:36:28 +00:00
pk
7a9ddaff33
On-board bwtwo diddles a system enable register bit for video, per Jason
...
Thorpe (PR#1672).
1995-10-23 23:35:03 +00:00
pk
5e55f88874
Remove `-fno-builtin'.
1995-10-22 17:36:33 +00:00
pk
bbfd54d128
Merge from netbsd-1-1 branch: kgdb_debug_panic decl; PR1633
1995-10-18 21:54:34 +00:00
pk
ce2afd8d64
Sync filesystem before running installboot.
1995-10-11 13:32:57 +00:00
pk
64a90cd0b0
Check input channel in gettick(); for `L1-A' processing.
1995-10-10 20:11:33 +00:00
pk
ebe37d8041
We don't need `rem.o'.
1995-10-10 20:07:54 +00:00
pk
4dcb5917b8
Brr.. libkern.o is way too big for our bootxx..
1995-10-09 23:25:54 +00:00
pk
be2f4294bf
Add `fd' to list of possible boot devices.
1995-10-09 22:34:03 +00:00
pk
c4dc969b09
Point `bootdv' at the disk device instead of the controller (from Jason Thorpe).
1995-10-09 22:33:07 +00:00
pk
53eb8f8175
RASTERCONS now works on sun4's too.
1995-10-09 15:39:34 +00:00
pk
1ad1d128e3
Fill in `ascent' values correctly.
1995-10-08 19:31:44 +00:00
pk
ecf1cf893d
Add forgotten `eeprom' configuration.
1995-10-08 11:45:39 +00:00
pk
21a594651a
eeprom_match: account for differing physical addresses (per Jason Thorpe).
1995-10-08 11:44:59 +00:00
pk
87a0c55d23
Patch from Jason to factor out a common framebuffer size determination
...
routine from the individual drivers.
1995-10-08 01:39:13 +00:00
mycroft
c078d7a9f4
Remove __builtin_saveregs().
1995-10-07 22:27:31 +00:00
mycroft
6287d3d7b2
Remove bzero().
1995-10-07 22:24:50 +00:00
mycroft
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
pk
48849279bf
Script to assist installing second-stage boot programs.
1995-10-05 21:03:12 +00:00
pk
aea329df61
rcons: rc_maxcol and rc_maxrow were swapped.
1995-10-05 13:16:57 +00:00
pk
c8f10b184c
Do not set `ra_len' in bwtwomatch(); we only need the pixels for CONSOLE,
...
but if so, we need the lot.
1995-10-05 00:33:23 +00:00
pk
de0c6a97bd
RCONSOLE => RASTERCONSOLE.
1995-10-05 00:26:07 +00:00
pk
c1e313b122
include `files.rcons'.
1995-10-05 00:21:35 +00:00
pk
b79dc038d5
Machine dependent RASTERCONSOLE font definition to be passed to rcons_init().
1995-10-05 00:02:54 +00:00
pk
859b799130
RCONSOLE => RASTERCONSOLE
1995-10-04 23:44:33 +00:00
pk
d19cacbb03
RCONSOLE => RASTERCONSOLE.
1995-10-04 23:35:13 +00:00
pk
dad96c6619
Add a few constants used for mapping bit and pieces in the kernel driver.
1995-10-04 00:21:27 +00:00
pk
32c023995c
Bring reset logic into interrupt state machine.
1995-10-03 17:32:12 +00:00
pk
fcc53878ca
Make fbrcons_init() resistant against SUN4s.
1995-10-02 21:48:21 +00:00
pk
cfbe993b9b
Update to use <machine/cgtworeg.h>
1995-10-02 21:44:51 +00:00
pk
38d1101ad3
Silly me.. there's already a <machine/cgtworeg.h>
1995-10-02 21:44:22 +00:00
pk
fb58a99a8f
Fix some bogus calls to {read/write}disklabel().
1995-10-02 21:04:45 +00:00
pk
82434458cc
Get some of the bugs out. Thanks to David Gilbert for testing.
1995-10-02 09:07:03 +00:00
pk
13dcbfbb29
Make this work with OBJ dirs.
1995-09-30 21:43:35 +00:00
pk
160b38697c
Refer to installboot(8)
1995-09-30 21:33:30 +00:00
pk
a029979ad3
Manual page for installboot(8).
1995-09-30 21:32:14 +00:00
pk
691b9f2bfa
Avoid reading the filesystem superblock in bootxx; all info now prepared
...
by installboot (per Gordon Ross).
1995-09-27 09:03:13 +00:00
chuck
b3ecc4c310
make sure devopen() sets pd->devtype properly when BOOTXX is defined
...
(should be DT_BLOCK). otherwise the bootxx boot block will fail if
you are on a system with a v2 openprom [because it will not do the
v2_seek in obp_strategy()]. fixes the problem recently noted on
the port-sparc list by matthew green <mrg@eterna.com.au>. i tested
fix on a ss2 with a v2 prom.
1995-09-26 20:07:53 +00:00
pk
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
chuck
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
chuck
25563b1f82
add config info for "xy" xylogics 450/451 driver
1995-09-25 20:27:30 +00:00
