Commit Graph

32 Commits

Author SHA1 Message Date
chs fc374b9d4f add Boca Research 4- and 8-port cards. from openbsd. 2002-10-29 08:59:36 +00:00
bouyer d9c216c219 Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790. 2002-08-02 10:40:30 +00:00
enami c7d782764a Add an entry for Avlab Technology, Inc. Low Profile PCI 4 Serial (in Japan,
sold by Kuroutoshikou as SERIAL4P-LPPCI.)
2002-07-05 14:10:32 +00:00
seb 2c69553625 Support Titan PCI-800L, a 8 serial puc card, from PR 17140.
Reviewed/approved by veego@ and martin@.
2002-06-02 18:43:27 +00:00
lukem 36bbd51aa2 Support NetMos NM9845 Quad UART and 1284 Printer port.
All 4 serial ports and parallel port seem to work.
2002-05-24 12:07:46 +00:00
hannken 616dac6232 Add support for NetMos NM9805 1284 Printer port.
Tested by David Kwok <dkwok@iware.com.au>.
2002-05-13 09:19:57 +00:00
hannken 6991df9968 Add config for the SUNIX line of pci serial/parallel cards.
Approved by: Jason R. Thorpe <thorpej@wasabisystems.com>
2002-04-11 13:53:56 +00:00
thorpej cb2d65aaf9 Fix a minor typo. 2001-12-16 22:23:01 +00:00
thorpej 23dfa29697 Add the serial port on the Middle Digital, Inc. PCI Weasel. 2001-12-16 22:22:04 +00:00
jonathan 879d358535 * Add entry for Dolphin Peripherals 4036 dual-serial card.
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
   attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
christos 56cffa29dc Add Titan 200H (from Wojciech Puchar) 2001-11-18 20:20:25 +00:00
lukem 9048aaae21 add RCSID 2001-11-13 07:48:40 +00:00
soren 3c508a8790 Add support for the PCI-400 card and correct the clock rate for all the
VScom/Titan cards.
2001-08-06 22:25:36 +00:00
thorpej d79f9adc90 Add another Lava serial board. 2001-07-04 22:39:11 +00:00
bouyer c7871f80bf Looks like "VSCom PCI-800H" should be in fact "Titan PCI-800H". 2001-03-13 17:23:52 +00:00
msaitoh 749e1bccc9 add support for NetMos NM9835 Dual UART and 1284 Printer port. 2001-03-04 21:30:24 +00:00
christos 6e65af2882 make this compile again. 2001-02-14 21:10:20 +00:00
christos e0ddf88b0a PR/12204: Andreas Wrede: Add support for Lava 8-port serial card. 2001-02-14 15:07:28 +00:00
bouyer 4dc117d433 Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed.
Thanks to Bernd Ernesti for pointing this out.
2001-01-04 11:34:27 +00:00
veego 3e63d458f0 Use COM_FREQ for COM part of the last commited entry.
Why are there other drivers here which have PUC_PORT_TYPE_COM but don't
use COM_FREQ or even don't have the extra field?
2001-01-04 08:49:31 +00:00
veego 17718db1b9 Add support for boards with an Oxford Semiconductor chip.
This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and
1 parallel ports.
XXX We need to move the PCI IDs to pcidevs.
2001-01-04 08:43:21 +00:00
bouyer 286f4f934f Add a 'flag' member to struct puc_attach_args and struct port. For
PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits
to 0, used for real flags if needed).
Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM.
Add support for the VScom PCI-800H 8 port serial adapter (which uses
a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :)
XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800
entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 15:13:15 +00:00
bouyer 2a11ec9347 Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth. 2000-09-06 15:27:37 +00:00
bouyer f522d6f1ee Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk. 2000-02-08 16:26:23 +00:00
castor b8a6774e36 Add support for Lava Computers MFG 2sp-pci and quattro cards. 1999-12-04 05:43:44 +00:00
jun a525b9a12a Commit patch kern/8778
Subject: NEC PCI modem support
1999-11-16 03:15:17 +00:00
cgd 636e8f4688 'Dolphin' -> 'Dolphin Peripherals' where appropriate 1999-07-03 05:55:23 +00:00
cgd 111e8a47c4 Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
cgd 6b77f11d67 put in better name/description for Simon G's board 1999-02-06 06:55:15 +00:00
cgd 04046c6dd7 add code to cope with multiple ports per BAR, as are found, for instance,
on the 8 port card Simon Gerraty has.  In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently.  It works,
but it's not optimal.  (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
cgd 8f94f1a709 I went to Fry's and noticed a few more cards that probably will be
supportable with this driver, but currently aren't supported.  Add them.
1998-07-12 02:21:56 +00:00
cgd d77d6869b1 add a driver for "PCI 'universal' communications" cards, that is, PCI cards
which contain 'standard' com- and lpt-type ports.  Some of these present
as PCI simple-communications/serial or simple-communications/parallel
devices, but many do not.  (Additionally, there is no document that I can
find that describes the "specific well-konwn register-level" description
of how the 'standard' devices' config space headers shold work.)  Eventually,
some of the devices driven by this code should become simple pci attachments
for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 18:52:41 +00:00