babd44e7a1
Ops, regen siop.out from the last siop.ss.
2000-05-04 15:44:35 +00:00
c8ff442f72
Add a flag hold in scratcha0, set when we're doing a data transfer. Used
...
for save data pointers.
2000-05-04 15:42:42 +00:00
fe54b787dc
Add NetBSD RCS Id and copyrigth notice.
2000-04-27 14:08:09 +00:00
88be4752d0
- Change the script to start new commands in an asyncronous way, using
...
'command slots' in which the host can put command and wait for the script
to start them
- Change siop.c to do full disconnect/reslelect, allowing as much as one
command per target/lun to run in parallel.
- Fix bug in registers init where a board without BIOS would end at
ID 0 (now the driver works on alpha too).
- better handling of messages, sending back a MSG_EXT_SDTR in response to an
incoming MSG_EXT_SDTR, and MSG_MESSAGE_REJECT for unhandled messages.
- fix use of bus_dmamap_sync() and htole32().
- supports shared interrups
- change some int8 and int16 to int, for alpha and mips benefits ( suggested by
Toru Nishimura)
2000-04-25 16:27:05 +00:00
5ee6872b46
- Add support for NOP instruction
...
- fix dsp value for second operand of memory move, so that patch list will be
correct.
2000-04-25 16:01:16 +00:00
19ada4a82a
Snapshot of work in progress: new driver for the NCR 53c8xx SCSI controller
...
(the name 'siop' is still being discussed, may change).
Only basic disconnect/reselect for now, no sync/wide negotiation.
Tested with 810A, 875 and 895 on i386 only.
The bus-independant part should also be able to handle the 53c720 and 53c770.
A new driver with enhanced script should appear for the 825/875/895 'soon'.
2000-04-21 17:56:58 +00:00
cd5411b382
Script assembler for the NCR 53c7xx/8xx scsi controller. Initial work
...
done by Michael L. Hitch, support for the 8xx and some improvements
by me.
2000-04-21 17:50:07 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
29f08cd82d
add 12160 (Ultra3) microcode
2000-02-12 02:07:49 +00:00
67944140cf
oops, got the initiator and initiator/target f/w reversed for the 1080
1999-12-20 04:25:56 +00:00
775b699ee1
add in initiator mode only f/w versions
1999-12-20 00:22:56 +00:00
04debef27a
add back firmware with BSD style copyright as approved by Qlogic
1999-12-03 21:48:49 +00:00
a7c74fb98f
Re-add stub Qlogic F/W files so that life is easier when/if the new
...
Qlogic F/W copyright is approved.
1999-11-16 18:48:40 +00:00
7c3f92fd69
Remove f/w from tree. The licences are not acceptable to TNF.
1999-10-28 16:13:43 +00:00
05a454312d
roll firmware
1999-10-14 02:12:34 +00:00
387650fb8b
do not install these headers. they are large (~1.8M) and useless to userland.
1999-08-26 07:58:58 +00:00
c9d36d5b4c
add in (controlled by option) 2200 Expanded Lun F/W
1999-07-06 05:43:51 +00:00
8fc3744ddd
Upgrade 2100 F/W and add 2200 f/w.
1999-07-05 20:33:58 +00:00
a10888f463
roll ISP 1080/1240 f/w to latest level
1999-05-12 16:45:04 +00:00
e6a460c3f3
roll ISP1040 and ISP2100 f/w to latest release
1999-04-04 01:21:02 +00:00
d3fb0e2ad5
roll internal tag level
1999-03-25 19:41:47 +00:00
f124765044
More and more .Os cleanups. .Os is defined in the tmac.doc-common file,
...
so we shouldn't override it with versions in the manpages. Many more to
come.
1999-03-22 18:25:43 +00:00
690045798e
roll internal tag
1999-03-17 05:11:57 +00:00
72c7f98bd8
add in 1080/1240 f/w, plus options to not compile stuff in
1999-03-17 05:11:13 +00:00
ee72ee212e
darn- 7.55 seems to be a little unstable- go back to 1.31
1999-01-31 04:56:20 +00:00
513722ba25
Grrr.. Do the *correct* and *usable* 1.31 firmware. You have to power
...
cycle to get rid of the old 1.31 firmware. *@!$&^@&$!&^&^!!!!!
But anyway comment it out and use new SBus 7.55 firmware. We get fast posting
with this as well as 32 luns and target mode support.
1999-01-30 07:18:59 +00:00
09ce6222fc
roll internal release tag
1999-01-30 07:14:26 +00:00
9ccf227085
clean up header
1998-12-28 19:07:38 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
4275b01a08
Adjust copyright notice to reflect that Qlogic still owns this.
...
Move SCSI f/w to 7.55 level. Move FibreChannel f/w to 1.13 level.
1998-09-08 07:13:11 +00:00
0456723423
Adjust copyright to reflect that this is really still owned by Qlogic
1998-09-08 07:06:57 +00:00
15f982f580
port-i386/5706: I had no problem with the previous patch, but someone
...
else has. Rolling it back while we try and figure it out.
1998-07-04 22:29:46 +00:00
205c293676
Patches from Justin that handle some REV B AIC7880 problems
1998-07-03 23:45:10 +00:00
e2578025b3
Point people to the correct Makefiles to build generated headers.
...
(Suggested by Manuel Bouyer.)
1998-06-16 18:36:03 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
b66dd55f59
Backout endian changes here (per discussion with Justin) and move them to
...
aic7xxx.c
1998-04-16 07:07:37 +00:00
dd709a7f89
Make it possible to interface to big-endian cpu's.
1998-03-11 20:57:03 +00:00
5cafda5b3c
Update 2100 F/W to 1.10 level. Also remove some older 2100 f/w versions.
...
This version of the 1.10 f/w is initiator only (not initiator/target).
1998-01-28 06:09:02 +00:00
fff05a68ab
RCSID Police.
1998-01-05 07:31:05 +00:00
fd208bedb2
Rev up to 1.09 FC f/w, but keep 1.07 around- 1.09 is a little strange.
1997-12-05 19:42:32 +00:00
d90bb02e10
oops on a comment- it is 1.07 FW, not 1.05
1997-12-03 00:45:05 +00:00
fee73b1391
Roll to 1.7 F/W level.
1997-11-17 05:07:02 +00:00
20d01ea842
Updated f/w from Qlogic.
1997-11-02 22:10:57 +00:00
3e8e744696
getopt returns -1 not EOF
1997-11-01 06:49:14 +00:00
38ea6714c9
New microcode release (1.02) from qlogic for the 2100.
1997-09-19 14:15:54 +00:00
695bb7c37e
Addition of PCI Qlogic ISP2100 (Fibre Channel) support meant a slight
...
change in f/w layout.
1997-08-16 00:30:37 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
bouyer