c3833aaabe
Opps, what was a delay() prototype doing here.
1996-02-22 23:25:10 +00:00
19d5694f93
Remove the hack that faked up an "ssp" value. It is now up to
...
locore.s to put the right sp in the frame. Also move memory
access code into db_memrw.c so it can be taken separately.
1996-02-22 23:23:23 +00:00
88be357d42
Fixed declaration of a debugging variable.
1996-02-22 23:03:44 +00:00
7b9c8753a7
Added #ifdef guards round the FPE initialisation calls.
1996-02-22 22:56:16 +00:00
66198928f8
Fixed several function declarations.
1996-02-22 22:51:14 +00:00
2c74bc8511
Removed some dead code and fixed several function declarations.
1996-02-22 22:48:05 +00:00
f266edf8b8
Default to running an FPA at full speed. Updated delay() to take an
...
unsigned int.
1996-02-22 22:44:58 +00:00
9a3e71626d
Fixed a little bug that zeroed the first couple of words of the symbol
...
table when the bss is zeroed.
1996-02-22 22:41:31 +00:00
80684b67bc
Fixed registration of the symbol table.
1996-02-22 22:38:48 +00:00
6a3087958a
Add #ifdef _LOCORE round delay() prototype and move DELAY macro
...
to param.h as well.
1996-02-22 22:21:55 +00:00
2f3ad94f8d
An #ifndef _LOCORE to make this file safe to include in locore.s.
...
Introduce a couple of `CPU-type' helper macros to reduce the preprocessor
tangos in many a source file.
1996-02-22 21:59:08 +00:00
db7d722c4b
A bit of reshuffling. Also some stricter prototyping.
1996-02-22 21:07:05 +00:00
f7dff866af
Remove VAX-specific register reference from comment (closes PR 1481)
1996-02-22 20:30:16 +00:00
9777b1173f
Thought I had already removed this ... Junk file that got checked in
...
due to finger trouble.
1996-02-22 17:46:24 +00:00
e259a02425
Correct some prototypes.
1996-02-22 15:04:07 +00:00
a7daa2d931
- Clean up DEBUG code.
...
- Setting the "monitor BSY" flag for polled PDMA is non-optimal. The
polled requests generate an interrupt that isn't serviced until the
command has been cleared from the queue.
1996-02-22 14:31:26 +00:00
a56b76451d
add M_AFS
1996-02-22 12:47:33 +00:00
0ffcbb494d
Always swap most of the fields when updating a config file entry; otherwise
...
we can get weird lossage when deleting a field (e.g. the group).
1996-02-22 11:14:41 +00:00
c9dfd5cb44
First bunch of changes due to stricter prototype checking.
1996-02-22 10:10:44 +00:00
c86505a6a5
If we get a transfer with the SCSI_POLL flag set, don't use DVMA. We
...
only get these during autoconfiguration and during crash dumps. During
autoconfiguration, the transfers are small enough that DVMA won't be used
anyway. However, using DVMA during a crash dump can be dangerous,
depending on the nature of the panic, so we avoid it.
1996-02-22 07:25:05 +00:00
2f132eb5e7
Bring in Gordon's fix from the sun3 port:
...
Correct the DMA transfer count when the target disconnects before
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 07:14:53 +00:00
e8c79c9ef1
RCS id police.
1996-02-22 06:59:15 +00:00
a246f6c835
Fixup some RCS ids.
1996-02-22 06:50:49 +00:00
3ec5928403
Keep the terminal count information around, as it's self-clearing.
1996-02-22 06:21:48 +00:00
5be12dbfc8
Move the speaker driver to 'new' config. (Closes PR 1361, from Rafal Boni)
1996-02-22 05:53:16 +00:00
012b23ca17
fix a trace message
1996-02-22 04:06:03 +00:00
3700dbe324
Correct the DMA transfer count when the target disconnects before
...
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 03:22:52 +00:00
a19a024e59
Do not mark target/LUN busy until we commit to working with it,
...
after the check for reselections. (From Matthias Pfaller, PR 2105)
Also improve the selection code WRT concurrent reselection.
1996-02-22 03:10:47 +00:00
89179744bd
Use unsigned variables to calibrate delay_factor.
1996-02-22 02:04:14 +00:00
05105a9150
Define RELOC_INIT_SEGMENT_RELOC for the ns32k (Matthias Pfaller; PR#2103).
1996-02-22 00:19:57 +00:00
17de1d7eae
Close PR/2105: if.c does not compile without COMPAT_43 due to missing casts.
1996-02-21 14:28:33 +00:00
66fedbbe19
Correct format in a printf().
1996-02-21 10:21:14 +00:00
cb632f2035
Use shell internal substring matching, like bsd.man.mk.
1996-02-21 10:02:00 +00:00
37fbce7fae
Fix from Niklas Hallqvist <niklas@appli.se> for extendplussidi.
...
A missing constraint was allowing a register to get reused prematurely
when doing an addition of two longs into a quad.
1996-02-21 05:34:20 +00:00
e899c590d6
Fix some Kerberos omissions from /etc/services pointed out by Perry. Note
...
that I've flipped the default kerberos service back to 750; this may change
back again.
1996-02-21 04:43:10 +00:00
f63dd5fef2
sync with sparc version:
...
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:40:39 +00:00
adeed1d823
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:36:51 +00:00
d4e5b34479
rearrange build structure so different architecture-specific libraries
...
can have separate shared library versions, by building in the arch
subdirectory.
1996-02-21 02:43:52 +00:00
3afcb7a849
fix for new NFS include files. (checked with fvdl.)
1996-02-21 02:27:57 +00:00
5aaba7ba7b
turn on -G in more mode (no search highlight). discovered by cgd
1996-02-21 00:39:16 +00:00
5cf28d6807
add i386_vm86 sysarch() stub and documentation
1996-02-21 00:21:45 +00:00
c9a23604b9
fourth argument to kern_sysctl() must be a size_t *. simply passing a pointer
...
to SCARG(uap, len) won't do, because that'd be an int *. copy the value
into a size_t, and pass pointer to that.
1996-02-21 00:10:59 +00:00
9c95634273
in mfs_print: mfs_baseoff is a pointer, should be printed as %p, and
...
should NOT be cast to unsigned int.
1996-02-21 00:06:45 +00:00
c0cdc0cf04
when printing data modified on the free list:
...
(1) do not cast it to (void *), and
(2) print it as 0x%x, rather than %p.
This is not perfect (because the data being printed is "int32_t"-sized), but
is more correct than printing it as a pointer because the data is _not_ a
pointer, it is data to be printed in hex, and on some systems, pointers are
wider than the data items being printed, which leads to excess and misleading
output. The only 'right' solution to this is to have a printf specifier
that prints the fixed-sized types the right way, and that's not really
practical.
1996-02-20 23:56:16 +00:00
e98dc62664
Third argument to VOP_PATHCONF is a register_t *, and register_t may be
...
different than 'int'. Do the right thing when declaring variables which
are used this way.
1996-02-20 23:45:10 +00:00
9daf57454e
use phys_map for DVMA like the sparc
1996-02-20 22:05:32 +00:00
dfdd60a3d1
keep static symbols
1996-02-20 22:03:56 +00:00
b80de84521
kill SCSIDEBUG
1996-02-20 22:03:20 +00:00
dba6c61918
Re-do change to use const qualifer with conversion tables.
...
Fixed bug where pre-computed upper/lower case conversion tables were
used. This won't work if user selected a different locale.
1996-02-20 19:29:01 +00:00
6e72825941
Previous change (Use const qualifier with conversion tables) is broken.
...
(1) It won't compile, and (2) there's code in dd.c which actually
does modify (some, all, used?) conversion tables, so they can't _all_ be
const (if any can).
1996-02-20 18:54:01 +00:00
mark