364c6cf250
Add OPTi OHCI USB host controller.
1998-05-13 15:50:58 +00:00
18aa33cce5
Disable the change to check wdp_ataversion, since it's unreliable with old
...
devices. (Yuck.)
1998-05-09 05:20:35 +00:00
b3f9a74326
Fix a problem that will reboot the system with no message as to what the
...
problem was. A collision between a select and reselect would leave TC
non-zero from the command-out DMA count, which could later be considered
a fatal condition, causing a reboot. The message for that error was
only displayed with DEBUG. Fixed by clearing TC on a reselect. The
non-zero TC detection won't occur in this case, so unconditionally
display the message if it occurs.
Workaround for another problem that resulted from an "Illegal Command"
status from the 53c94 which would get ignored and result in a timeout
(which also reboots the system). Added the missing check for the
illegal command status, and add the workaround of resending the "accept
message" command to the 53c94. Correct fix will be to determine why the
message wasn't sent in the first place. Abort if the resending the
command doesn't work.
Correctly detect a spurious interrupt and ignore it. This was taken
from a newer Mach driver, but did not get the check converted for the
design difference between the current NetBSD driver and the Mach driver.
1998-05-08 15:39:01 +00:00
d2db996158
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:13:23 +00:00
d824266389
Remove some lint.
1998-05-06 19:21:45 +00:00
ed8ddb6948
more info (in heavy debugging cases) to print
1998-05-05 22:14:23 +00:00
128cb933b4
there is an (unimportant) difference between 1020 && 1020A
1998-05-05 22:10:36 +00:00
da5b8105bd
Remove BROKEN_INDIRECT_CONFIG relicts.
1998-05-05 21:41:18 +00:00
af65e69596
Add 5 more NE-2000 compatible PCI Ethernet interfaces. XXX Note that some
...
of these may need revision in pcidevs.
1998-05-05 17:23:08 +00:00
e28a3f28ac
Regen.
1998-05-05 17:22:20 +00:00
7b2b6d3835
Add a few more NE-2000 compatible PCI Ethernet interfaces. XXX Some of
...
these may need further revision to get vendor and product names exactly
right.
1998-05-05 17:22:04 +00:00
4626eef504
Slighly less brutal hack to deal with broken memory-mapped access of
...
the ThunderLAN on the TI TravelMate 5000 docking station: single it out,
and allow memory-mapped access on the Compaq products.
1998-05-05 07:17:12 +00:00
2eb37a4e87
When changing power, wait enough to keep timing constraint
...
described in PCMCIA specification.
1998-05-05 00:37:24 +00:00
6ba2c64ae6
Eliminate the degenerate loop in `ncr53c9x_intr()'. Retain the delay heuristic
...
it implemented under the label `shortcut:' and only use it in these
cases: (1) after successful re-relection, (2) after receiving command-complete
status, and (3) during message-in handshake.
1998-05-04 14:47:48 +00:00
0d3d41fa21
Allocate SCSI message buffers in ncr53c9x_attach(), with a provision
...
for front-ends to override the allocation to avoid alignment
handling in their DMA engines. Note that that ncr53c9x_msgout()
can request a 1 byte DMA transfer that would be difficult to break up.
1998-05-04 11:11:24 +00:00
4b69f3a465
The DEC RRD42 doesn't deal with LUNs very well either.
...
kern/5376, Simon Burge <simonb@telstra.com.au>
1998-05-04 05:56:31 +00:00
cbaec857db
Add the UMAX Astra 1200S scanner to the list of the LUN-clueless.
...
kern/5390, Rene Hexel <rh@vip.at>
1998-05-04 05:54:09 +00:00
19b7ffb19f
Regen.
1998-05-04 05:51:35 +00:00
0813824005
Add STB Systems' second PCI vendor ID, and their Velocity128 AGP product.
...
kern/5362, Paul Goyette <paul@whooppee.com>
1998-05-04 05:51:19 +00:00
5153af345d
In pci_conf_print(), don't print a mapping register if the size is 0.
1998-05-03 19:46:15 +00:00
93db65c28c
Properly compute the region sizes in pci_conf_print(). Bug pointed out
...
by Chris Demetriou.
1998-05-03 19:41:33 +00:00
85c0eea04e
Suppress the diagnostic printout if the keyboard controller has no
...
mouse port.
1998-05-03 12:04:53 +00:00
ed1653232b
If the keyboard is console device, use the command byte as set by
...
the console initialization code.
1998-05-03 11:54:38 +00:00
e47f63efe6
Make some diagnostic output "#ifdef PCKBCDEBUG".
1998-05-03 10:02:11 +00:00
ada1b933b7
Make error reporting similar to "pckbd".
1998-05-03 10:01:00 +00:00
8669ad14fc
Let keyboard probe succeed without a keyboard connected if it is used
...
as console input. (Previously, it did always succeed.)
(closes PR kern/5372 by Jason R Thorpe)
Make error messages cleaner and add some "#ifdef DEBUG" to reduce noise.
1998-05-03 09:57:50 +00:00
a835c012d3
Adjust PCLKDIV by 2 to correct the output sample rate. (Unfortunately, this
...
isn't documented.)
Fix typo in mappage routine.
1998-05-02 08:21:10 +00:00
fef6b0b8a3
Oops; fix typo.
1998-05-02 02:36:30 +00:00
cfe3e5fb08
Fix reading of the master volume, and a hack that seems to make stereo output
...
work correctly. (Will check the documentation as soon as I can read it.)
1998-05-02 02:34:53 +00:00
6cb1f6c5b1
Add a driver for the Ensoniq AudioPCI sound card. The driver still
...
needs some testing, but it seems to produce sound. The driver was written
by me, but since I don't have the hardware the debugging and testing was
done by Andreas Gustafsson <gson@araneus.fi>, Chuck Cranor
<chuck@maria.wustl.edu>, and Phil Nelson <phil@cs.wwu.edu>. Thanks.
1998-05-01 21:54:33 +00:00
aa7159be03
Regen.
1998-04-30 06:18:45 +00:00
6e626dfafc
Add the Apple Bandit chip.
1998-04-30 06:18:11 +00:00
9a25b32914
Use the symbolic name VVR_BLANK rather than a magic constant.
1998-04-29 02:23:20 +00:00
6493eddd91
Define the contents of the Video Valid register on the TGA and TGA2.
1998-04-29 02:11:19 +00:00
53d3aa940b
Sync with recent change made to bha.c by mjacob:
...
Cute buglet: you can end up with zero CCBs if there were no targets
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-29 01:02:44 +00:00
1acc8b53b5
Cute buglet: you can end up with zero CCBs if there were no targets
...
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-28 23:57:53 +00:00
df71a424d6
Change debug printing a littel again.
1998-04-28 23:19:20 +00:00
28454023cc
Add a comment about some future work.
1998-04-28 19:13:24 +00:00
41d55197b4
In wdcintr(), add a catch-all case so that this will compile if no
...
children are configured.
1998-04-28 18:36:07 +00:00
925fe63713
Fix a couple of function names used in diagnostic printfs.
1998-04-28 17:48:35 +00:00
127acabd9c
Add a few more debug messages and clean up debug printing a little.
1998-04-28 09:07:12 +00:00
0b2694152f
Update copyright.
1998-04-26 06:03:23 +00:00
eddaea2d53
In LBA mode, always use the `total capacity' count, rather than calculating
...
the capacity based on the c/h/s numbers. In fact, don't use the c/h/s
numbers for much of anything.
For ATA-4 drives or later, always use LBA mode, since it's now required.
Collectively, this allows >8GB disks (like the 12GB Bigfoot) to work.
1998-04-26 05:28:23 +00:00
4bca66087f
Now works with the Digital Hinote Ultra Mobile Media CD-ROM
1998-04-25 17:43:27 +00:00
0652ed68a5
Initialize sc_frequency. (How could this ever work?)
...
Add PnP entry for USR Sportster 56k internal modem.
Remove BROKEN_INDIRECT_CONFIG.
1998-04-25 10:58:24 +00:00
7bd7c58939
Fix function argument type.
1998-04-24 20:20:33 +00:00
68096acabd
From Robert V. Baron:
...
Compute the disk block addr at command queing time rather than exec time.
This fix a bug which could lead to data corruption on disk: when a command
was reexecuted after an error condition (from wdcunwedge), the partition
offset was re-added to the block addr, leading to a transfert at the wrong
disk block.
This should fix the problem reported by some laptop's users, where the
first disk read after a suspend/resume returned garbage.
1998-04-23 13:30:39 +00:00
7ba46a56e0
Correct defifintion of the WDCE_MCR and WDCE_ABRT bits: they have been
...
inverted since the begining.
This doesn't change anything, as these bits are not used in the driver.
1998-04-23 10:37:01 +00:00
63babb7549
Ignore LUN on yet another cdrom
1998-04-23 00:38:01 +00:00
84d2c38974
Set a flag during auto-configuration, so SCSI_AUTOCONF can be passed
...
when doing additional I/O from the scanner attach functions.
1998-04-22 19:44:18 +00:00
9663e5f689
Make probe message more consistent with usual practice.
...
From "Soren S. Jorvang" <soren@t.dk>.
1998-04-20 20:58:05 +00:00
5f6ca9ef93
Avoid "unused variable" warning without PCIVERBOSE.
...
From mynhier@cs.utk.edu (PR kern/5328).
1998-04-20 14:16:26 +00:00
3cdf7f6607
Undo change from drochner (Rev 1.4 of wsksymdef.h) and fix PR #5298 and #5299 .
1998-04-20 10:47:36 +00:00
cef633de2a
Fix a fencepost in last change.
1998-04-19 22:26:31 +00:00
b4d3bac06e
pmax has IPL_ constants; Define TC_IPL_ using them until all tc
...
drivers are converted to use IPL_.
Commit changes to if_le_ibus.c as a child of ibus.
1998-04-19 13:04:24 +00:00
c84f4e94d9
Copy alpha/tc/mcclock_ioasic.c (duplicated in pmax/tc/mcclock_ioasic.c)
...
into sys/dev/dec and split into a clockfns layer and a "middle" layer
for other DEC systems which use mcclocks with each onchip byte
register padded out to a 32-bit word.
Clone alpha/alpha/mcclock (also duplicated in pmax port) into
sys/dev/dec, and ifdef for default clockrates on pmax and alpha.
Use new machinery on pmax for ibus,ioasic attached mcclocks.
1998-04-19 07:50:25 +00:00
558e40fb86
Remove duplicate of sys/dev/dec/clockvar.h.
1998-04-19 06:11:55 +00:00
90b5c246c6
Skeleton code for the SBus expander box.
1998-04-18 19:00:17 +00:00
fb43bb5f19
Add danish keymap.
...
From Soren S. Jorvang (PR kern/5312).
1998-04-18 10:57:13 +00:00
13c6d27696
Fix spelling of my name.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-18 10:35:48 +00:00
d58832579d
Fix botched DMA tag initialization.
1998-04-18 10:26:56 +00:00
302692bf8d
Namespace protection: give key description table a more private name.
1998-04-18 09:51:20 +00:00
1745de275b
-Set keyboard (and/or controller) to XT scancode in early console
...
initialzation. Closes PR port-alpha/5303 (Jason Thorpe).
-Namespace protection: give key description table a more private name.
-Make sure "struct pckbd_internal" is completely initialized.
-Improve locator comparition in probe().
-Remove BROKEN_INDIRECT_CONFIG.
1998-04-18 09:49:58 +00:00
a099e8dda5
Initialize the command byte and its shadow register in early console
...
setup so that the keykoard driver can deal with scancode translation
in its console initialization function.
1998-04-18 09:42:20 +00:00
928943b2ff
Keep all relevant state information in a "pci_softc" so that it is
...
accessible at runtime (for LKMs in particular).
Remove BROKEN_INDIRECT_CONFIG.
1998-04-17 18:40:31 +00:00
085787ddbe
defopt the WSEMUL options.
1998-04-17 00:17:27 +00:00
d3067d3f3f
-don't modify call arguments in place - bad for debugging
...
-give at least the i386 its keyboard beep back
1998-04-16 21:18:46 +00:00
d860c80512
regen
1998-04-16 19:48:14 +00:00
bfd53bac43
add 2 ATM chips, correct entry for Toshiba MIPS bridge
1998-04-16 19:46:03 +00:00
30654f3e89
Split out from if_le_isa.c - this card is quite different.
...
The driver is known not to work (timeout on send attempts).
1998-04-16 18:00:14 +00:00
02157092d4
Make the ISA LANCE drivers work without BROKEN_INDIRECT_CONFIG.
...
DEPCA is now split out into a separate driver.
Because there can be only one attachment of a device to a bus, for
each card type a separate pseudo-bus was introduced which attaches to "isa"
and where "le" attaches to.
1998-04-16 17:51:46 +00:00
10860a27c6
Don't use KS_GROUP_xxx values which have set something in the lower
...
8 bits. This allows to OR them with keycodes.
This is probably a workaround for namespace confusion happening else-
where (in wskbdutil.c:ksym_upcase() perhaps?), but it helps without
too much digging into the details.
1998-04-16 13:29:41 +00:00
3cc1fe831c
count allocated screens correctly
1998-04-16 12:52:42 +00:00
112b5de402
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
d3febbb5aa
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
...
since the driver only supports little endian busses.
1998-04-16 07:12:43 +00:00
b66dd55f59
Backout endian changes here (per discussion with Justin) and move them to
...
aic7xxx.c
1998-04-16 07:07:37 +00:00
ca0d504418
some attributes are now global
1998-04-15 20:29:16 +00:00
0c199c88be
add MI ISA VGA and the speaker driver
1998-04-15 20:26:53 +00:00
2c823077d7
MI driver for the ISA speaker, and the IBM BASIC playstring interpreter
...
which has so many fans.
1998-04-15 20:26:18 +00:00
aadda67e18
add mi PCI VGA and TGA
1998-04-15 20:17:17 +00:00
eda73f204f
The "mi" TGA driver. It's still not of much use on anything but alpha
...
because it depends on initialization by the firmware.
Further, an mi mmap() is needed...
1998-04-15 20:16:30 +00:00
ac2ca72a01
a tab crept in
1998-04-15 16:52:37 +00:00
6ea0ab26e2
Don't reference functions defined in isadma.c if we don't have to,
...
since we might not have any ISA DMA-using devices configured, thus
isadma.c won't be compiled. Fixes a problem reported by Kevin Lahey.
Also, since there are only 8 DMA channels, don't bother checking
DRQs 8 - 15.
1998-04-15 01:53:47 +00:00
334ef5a59c
Fixup RCS IDs.
1998-04-15 01:45:43 +00:00
8c1b46c2f5
Remove the `delay port' stuff since nothing uses it anymore (can't reliably
...
use it on modern chipsets).
1998-04-15 01:44:23 +00:00
a95c0ac15a
Add pci_conf_print(), a function to dump the PCI configuration space, useful
...
in driver debugging. From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>,
PR #4249 .
1998-04-14 21:24:50 +00:00
ce28bee247
Add UDF and 66MHz capable bit definitions for the PCI status register.
...
From Zubin D. Dittia <zubin@clouseau.arl.wustl.edu>, PR #4249 .
1998-04-14 21:22:44 +00:00
ddf189f7da
Remove the stuff that was apparently not intended for commit in the
...
previous change.
1998-04-13 22:18:03 +00:00
993dcaa947
Add another device, YMH0021. From nathanw@MIT.EDU, PR #5289 .
1998-04-13 13:19:40 +00:00
4bcd8130fe
t_wopen fixes.
1998-04-13 12:14:42 +00:00
76970a00f5
trim ID of ST19171FC so that SUN drives are caught
1998-04-10 17:13:11 +00:00
db453b872d
Add support for the VIA Technologies VT86C926, from Kazuki Sakamoto,
...
PR #5256 .
1998-04-10 01:28:59 +00:00
30244f4eb7
Forgot to initialize sc->ioctl. From Matthias Drochner.
1998-04-09 17:16:57 +00:00
311e30018d
Split wscons/wskbd.c's softc into a static and a nonstatic part.
...
Booting into debugger (-d) now works.
Cleaned wscons/wskbdvar.h. Use the same attach arguments for
console and normal keyboards.
1998-04-09 13:09:45 +00:00
03b9fa0bc1
Change last arg of `vct_mmap_cookie' from `int *' to `bus_space_handle_t *'.
1998-04-07 20:31:26 +00:00
fe60e74148
Add hooks to make exclusive hardware locking possible. This is necessary
...
to make the driver suitable for the atari falcon.
1998-04-07 19:51:57 +00:00
0391896c27
Avoid namespace pollution.
1998-04-07 16:35:42 +00:00
2eea6bd8a4
We can't trust the "delay port" anymore - it doesn't work as expected on
...
newer chipsets. Use delay() instead.
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:23:19 +00:00
ec9776e3ab
Fix calculation of console minor device number.
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:06:33 +00:00
7ce1360e4a
Put some diagnostic output inside "#ifdef DIAGNOSTIC".
...
Being here, remove BROKEN_INDIRECT_CONFIG.
1998-04-07 16:02:25 +00:00
augustss