90567f2deb
Quick hack to pull in podulebus.h for the current architecture.
...
This should be done better (probably with <machine/podulebus_machdep.h> later.
2001-03-19 23:59:33 +00:00
66261e4fd6
Shared arm26/arm32 version of arm26 Ether1 driver. Seems to work on both
...
architectures.
2001-03-19 23:58:12 +00:00
2821b16ef4
Quick hack implementation of region ops. Not very pretty, but good enough
...
to get ei(4) working on arm32.
2001-03-19 23:56:45 +00:00
4d5762c860
This file depends on <machine/io.h>.
2001-03-19 23:03:59 +00:00
e7cc62cc44
A few #defines for the common podulebus API.
2001-03-19 22:59:13 +00:00
51e6b460ab
Slightly smaller code and tune for StrongARM.
2001-03-19 22:51:51 +00:00
3dfa223aa3
Stylistic nit - don't use mca_devinfo(), print the info directly, we know
...
what we are attaching.
2001-03-19 22:33:35 +00:00
8a2d4dc652
regen
2001-03-19 22:24:17 +00:00
198b90eb12
Add entry for ATI AT1720T, another card I've got from David Brownlee.
2001-03-19 22:23:58 +00:00
e6d6148e4d
regen
2001-03-19 22:20:30 +00:00
4f0e120ebb
Add couple of Computone products; I looked up ADF for 0x61f3 (which
...
I am owner of) and found couple others as well.
Mark 3c529-type cards and IBM Internal modem for inclusion in mcadevs.h.
2001-03-19 22:20:05 +00:00
1360c6c34c
add com at mca, bpfilter
...
add comment for elmc, describing what it is for
2001-03-19 22:08:17 +00:00
40d893a3f7
remove bogus ef entry
2001-03-19 21:58:09 +00:00
1c341b3d49
Provide MCA com(4) attachment. Tested with IBM Internal modem, kindly
...
donated to me by David Brownlee <abs@anim.dreamworks.com>.
2001-03-19 21:56:43 +00:00
1c300d3ee8
Make pa_*_base bus_addr_ts.
2001-03-19 21:03:47 +00:00
7ba79ec9f4
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
2001-03-19 17:06:11 +00:00
e0694eb01f
Switch news68k to ELF:
...
- Move options EXEC_ELF32 to std.news68k
- Add options COMPAT_AOUT_M68K to each config file
2001-03-19 16:59:19 +00:00
0b2a9fa53d
kill QUOTA on everglades.
2001-03-19 05:35:51 +00:00
d618ec62ad
In sys_obreak(), the return value of atop() was being used to change
...
the process dsize for both positive and negative changes. Since atop()
casts its result to a paddr_t (which is unsigned), negative changes in
process data size resulted in unrealistic dsizes being set. Use
"dsize -= atop(-diff)" for a negative diffs. Fixes the "Impossible
process sizes" mentioned on current-users.
Unsigned cast catch and much debugging help from Martin Laubach.
2001-03-19 02:25:33 +00:00
211a59bbed
be consistent with whitespace
2001-03-19 01:10:51 +00:00
c40daf0aed
change uvm_winsize to uvm_winshift so that we can avoid division
...
by a non-constant value.
2001-03-19 00:29:03 +00:00
e47583af2c
missed some KERN_FAILUREs.
2001-03-18 23:43:53 +00:00
89063179ad
enable I-O DATA WN-B11/PCM wlan card with WEP
...
reported by Shingo WATANABE <nabe@nabechan.org>
2001-03-18 21:13:12 +00:00
7c7a848854
regen
2001-03-18 21:12:01 +00:00
6fb0c29aed
add product I-O DATA WN-B11/PCM wlan
2001-03-18 21:11:30 +00:00
77d7115444
Spelling mistake (saftey -> safety). No functional change.
2001-03-18 18:49:37 +00:00
e533061fce
in mem_access_fault*(), when invoking the pcb_onfault mechanism, pass the
...
return value of uvm_fault() to the onfault routine via %o0. users of
pcb_onfault now return this value to their callers rather than always
returning EFAULT. this allows i/o errors in VOP_GETPAGES() to be returned
back to read(), etc.
2001-03-18 17:11:22 +00:00
f8ffa07954
Always restore the spl value when returning form physconkbd.
2001-03-18 17:03:26 +00:00
62dd3b3608
Fix a couple of cases where we could return without restoring the
...
SPL value. Fixes a problem with the Xserver on A7000 kernels.
2001-03-18 17:00:56 +00:00
614827277d
Switch over to using podulebus_irq_establish().
2001-03-18 16:58:55 +00:00
5c98fe3fec
Gratuitous change of signature for podulebus_irq_establish(). It now takes
...
an opaque podulebus_intr_handle_t, which can be found in podulebus_attach_args.
It's actually the slot number, but don't tell anyone.
2001-03-18 15:56:04 +00:00
846f79ea76
LAMB uses nonstandard timer frequency. set TIMER_FREQ to appropriate
...
value (otherwise severe clock delay will result).
http://www.wildlab.com/bbs/logview.cgi?pg=9&no=521
2001-03-18 15:24:14 +00:00
3bb2b205f9
show the cpu a process is running on in proc
2001-03-18 14:24:10 +00:00
45d39a2030
redo previous slightly differently.
2001-03-18 14:10:34 +00:00
e82b5bb630
"mach slock" for simple_locks
2001-03-18 14:06:10 +00:00
949f93d279
If uvm_fault() returns an error, pass it on to the pcb_onfault handler
...
if there is one. They already arrange to return it to their callers.
2001-03-18 14:04:04 +00:00
bfaa81d0e1
Fixed typos in comments
2001-03-18 11:31:44 +00:00
1fae55f3ae
in trap(), when invoking the pcb_onfault mechanism, pass the return value
...
of uvm_fault() to the onfault routine via %eax. users of pcb_onfault now
return this value to their callers rather than always returning EFAULT.
this allows i/o errors in VOP_GETPAGES() to be returned back to read(), etc.
2001-03-18 02:53:09 +00:00
6c42a5d73a
Move over to using podulebus_irq_establish.
2001-03-18 01:31:03 +00:00
63059bd6dc
Remove redundant sc_ih from struct ea_softc.
2001-03-18 01:30:30 +00:00
b369fdfd44
Use podulebus_irq_establish().
...
To avoid complexity, don't bother with ea_irq_claim() and ea_irq_release() any
more. This driver will be replaced with an MI one soon eough -- it just
happened to be convenient for me to test.
2001-03-18 00:00:43 +00:00
f98a674d6d
Add podulebus_irq_establish(), with the same spec as the arm26 one.
2001-03-17 23:58:43 +00:00
d7e64c2e21
Method array for a really big inter-byte offset.
2001-03-17 22:03:12 +00:00
16198f2b92
Podulebus convergence:
...
pa_memc_[th] -> pa_mod_[th]
Add pa_easi_*
Add pa_*_base
Add pa_slot_flags to indicate whether EASI is supported.
2001-03-17 21:56:06 +00:00
14d2d5706f
Conditionalize inclusion of the interrupt handlers for 'kbd', 'zs' and
...
'ncrscsi' since they are not present on the Milan.
2001-03-17 20:56:31 +00:00
697e84ed46
Update for new location of podules.h and podule_data.h
2001-03-17 20:34:43 +00:00
e6a3d0d5c9
Move generated files from sys/arch/arm32/podulebus to sys/dev/podulebus.
2001-03-17 20:32:00 +00:00
255336b13c
Migrate known-podules list from arch/arm32/podulebus to dev/podulebus.
2001-03-17 19:05:19 +00:00
17b6222740
Small beginnings of podulebus convergence: Have podule drivers print colons
...
in attach messages, rather than doing it in podulebusprint().
2001-03-17 18:46:25 +00:00
bfc2063e69
Create an ARM2-specific undefined-instruction handler which deals with the
...
undef/SWI bug and handles emulating SWP.
Untested bacuse my ARM2 machine isn't currently set up.
2001-03-17 18:12:09 +00:00
bjh21