bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
23ddff5688
use the new "xx" prefixed OUIs because the mapping to the ID register
...
bits differs from the MII_OUI() way
1999-05-14 11:40:28 +00:00
83f9ab3c87
Implement asynchronous autonegotiation when driven by the MII tick
...
(one-second clock). Prevents .5s delays every 5 seconds when the interface
is up but there is no link. Fixes PR 7361.
1999-04-23 04:24:32 +00:00
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
thorpej