412733582c
typo
1999-06-09 01:45:49 +00:00
efffa3db54
Make sure fd is a directory before we df it.
1999-06-09 01:39:29 +00:00
ff1d4cab4a
Add FALCON to EXTRA_KERNELS.
1999-06-07 14:44:46 +00:00
7658a91815
Create *wd[23]? device nodes, so that machines with more than two IDE
...
drives can be installed.
XXX The 1.4 single-floppy install has only 24 free inodes, but 32 are needed
by this. Some more work is needed (e.g., change newfs parameters for the
ram disk, or switch back to a 2-floppy install).
1999-05-31 11:14:07 +00:00
364d5a1432
Correct the dhclient startup to follow the standard indentation style
1999-05-28 21:01:42 +00:00
a3f17d2959
Don't barf when we have fdesc mounted. Just skip the devices fdesc provides
1999-05-28 21:00:50 +00:00
93720b922f
Define our own snap_kern target that builds all the kernels, but
...
does not install the un-patched ramdisk kernels. The snap_md_post
target builds the installation ramdisk image, patches that into the
ramdisk kernels, and installs them. Also the miniroot.
Automated snapshot build works now.
1999-05-21 04:02:02 +00:00
551aad7b51
The snap_kern target is not sufficiently flexible.
...
Allow Makefile.in to provide its own.
1999-05-21 03:45:50 +00:00
1e4c25754e
* document `shells' default (suggested by cgd)
...
* for each database, list supported sources (it's useful to know)
1999-05-19 02:25:14 +00:00
2fe3ffc188
Modify (commented out, pre-existing) identd line to start identd `nowait'
...
for those who want to use tcpwrappers appropriately.
Resist temptation to add -L"something appropriate"
1999-05-18 22:20:07 +00:00
a9233886c4
Increase ramdisk size
1999-05-18 07:51:34 +00:00
05bdcfc198
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 03:30:02 +00:00
f2a23c575b
updates for the 1.4 release
1999-05-17 03:35:55 +00:00
6e4e1ddc27
connect a keyboard to the display
1999-05-15 14:28:14 +00:00
55adfd0a58
Support a second tape and cd drive on installation ramdisks.
1999-05-13 22:08:48 +00:00
c889455b1c
Add 4 lpt nodes
1999-05-11 20:45:38 +00:00
e845da9348
fix spelling
1999-05-08 01:09:09 +00:00
7c5c9764b5
turn off ttyE[123] by default -- default installs don't configure them.
1999-05-01 00:23:27 +00:00
56d7789c45
New systems should NOT ship with /usr/pkg/lib or /usr/X11R6/lib in
...
ld.so.conf. (Frankly, new systems shouldn't ship with a ld.so.conf.) We
use rpath for that purpose now. Unfortunately, 1.4 won't have this
change, so it will be in 1.4.1.
1999-05-01 00:06:20 +00:00
7552438f3f
Add the tty device-nodes on the install floppy. You'll need them for
...
slip connections.
1999-04-30 19:05:47 +00:00
9c072e268f
make -s flags for syslogd and lpd the default
1999-04-29 18:26:43 +00:00
bc05796ee2
Set console and ttyE? term types to vt100.
1999-04-29 01:26:15 +00:00
5e40cf296d
Move the knowledge that /usr and /var should be mounted early from
...
rc.subr to the default rc.conf.
While this is no longer necessary to supress noise,
it increases the clarity of the situation and removes
one more bit of what should be adjustable configuration
from scripts that site admins shouldn't have to edit.
Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-28 23:32:29 +00:00
bdd6ce47a7
Greatly simplify by doing the moral equivalent of
...
cd ../distrib/pmax && make install
1999-04-27 12:32:08 +00:00
31aebad029
+ Build (but don't install) INSTALL and RAMDISK kernels.
...
+ Make installation/diskimage installation/netboot in ${RELEASEDIR}
+ snap_md_post depends on the diskimage, the diskimage tar file and
the install kernel, and installs these into the right places in
${RELEASEDIR}.
1999-04-27 04:36:25 +00:00
ae25beb28c
+ Put directories to create in ${RELEASEDIR} into a variable that
...
port-specific Makefiles can add to.
+ Separate snap_md into snap_md_pre and snap_md_post that are depended
on before and after snap_kern.
+ Build all kernels listing in ${BUILD_KERNELS}, but don't put them in
${RELEASEDIR}.
1999-04-27 03:08:02 +00:00
eebf5c0180
Add code for creating pxN. px{0-2} are created as part of std.
1999-04-26 04:46:46 +00:00
adb6375b6b
Add a 'ramdisk' target, and create ptys on both ramdisk and floppy
...
(Needed for sysinst).
1999-04-26 04:20:04 +00:00
51a0d74d06
fixed syntax for using an nfs mounted mfs partition
1999-04-24 19:57:11 +00:00
9e14da1db9
change default console terminal type to "unknown" instead of "dumb"
1999-04-24 19:20:46 +00:00
018f256ee3
Added example mfs /tmp in fstab
...
Added wscons entries in ttys, but leave default "console" enabled
since some hardware still uses the serial port console
1999-04-24 19:19:48 +00:00
1c98ea4e2a
+ttyEcfg
1999-04-23 18:45:50 +00:00
5a6330ac23
typo
1999-04-23 18:14:29 +00:00
357a0baaf8
Get rid of old-style chown operands.
1999-04-23 08:20:28 +00:00
11f13fe80d
Remove comment about critfs_requires_network, which has gone away
1999-04-21 21:58:29 +00:00
3cc8bf22d2
Configure wscons much earlier so that a virtual console can e.g. be
...
used for "syslogd" output.
1999-04-13 07:40:53 +00:00
ff5615a44f
build ipfilter devices by default.
1999-04-13 06:45:36 +00:00
1a3bfc2c1b
When checking local status, jJust ignore not-found filesystems, rather
...
than printing an error, just as we do when we try to mount it.
1999-04-13 02:15:49 +00:00
31f06c6bd1
OK, adjust the kernel finder one more time to handle the case of a config
...
file that just does "include" GENERIC, and therefore has no "config" line.
It's simplest to assume that "netbsd" will be the result in that case.
Rather than duplicate config(8)'s parser in awk (or something), we should
adjust config to parse the config file and spit out the kernel names, and
then use that to replace this awk script thing.
1999-04-10 04:41:52 +00:00
193be65e25
under "minimal" correct a tyop: wsbkd0 -> wskbd0
1999-04-09 22:22:17 +00:00
0a40032913
Turn on building of A7000 CATS EBSA285 RISCPC SHARK kernels for releases.
1999-04-09 21:29:21 +00:00
e6bc2dc3c6
Add a note about critfs_requires_network on dhclient line.
1999-04-09 15:18:51 +00:00
6b39fd9da6
add a comment explaining how "pcvt" fonts can be used
1999-04-08 10:58:36 +00:00
d023c654fd
Slight tweak to the EXTRA_KERNELS build commands to work around a shell
...
parsing wierdness.
1999-04-08 08:24:44 +00:00
a6a272d18a
Add "_crunch" section required by catman to crunch compressed cat pages.
1999-04-04 11:02:09 +00:00
0d59551634
Avoid using id(1), as this loses when /usr isn't mounted.
1999-04-04 09:58:57 +00:00
5048fc1b17
NetBSD's very clever kernel build system can make more than one
...
kernel per config file and the resulting kernel need not be named
"netbsd"; therefore paw through the config file after the kernel
builds are done, find them all, and put them where they belong per
release(7). This all done with some clever awk/sh scripting, from
PR 7180 by David Forbes.
1999-04-04 09:57:11 +00:00
2f7a39463f
Create /var/log/aculog with appropriate permissions, per PR 6675
1999-04-03 09:40:38 +00:00
252a967372
Change to make ownership of /var/msgs "daemon" per PR 6672
1999-04-03 09:36:04 +00:00
668efbbcec
Change mount_critical_filesystems() so that if given an argument
...
of "local" it will not mount filesystem types it identifies as
network file systems (currently just nfs). Call the function twice,
before networking starts with arg "local", after networking starts
with arg "network". Remove critfs_require_network as is now redundant.
1999-04-01 03:58:44 +00:00
b779dad4d4
Add hup, ll and x shell functions similar to the aliases in dot.cshrc
...
plus set the prompt. Tested with /bin/sh and /bin/ksh.
1999-03-30 02:36:05 +00:00
7824e2333c
NO_POSTFIX should have been BUILD_POSTFIX with reversed sense.
1999-03-29 16:40:44 +00:00
e8d9f12b08
Add a NO_POSTFIX check to allow \'make distribution\' to work.
1999-03-28 21:31:11 +00:00
3018f8d67b
postfix support.
1999-03-27 05:17:08 +00:00
b4bf620b49
add postfix
1999-03-27 05:13:55 +00:00
4fc0cc79b3
If we have an 'operator' user, it should at least be gid operator.
1999-03-27 03:51:41 +00:00
e75fc73f95
add postfix uid/gid, maildrop gid
1999-03-27 01:44:37 +00:00
4603b8460d
start xdm after wscons configuration - the X server might want an own
...
virtual screen
1999-03-26 13:45:47 +00:00
5a90dbf495
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 13:10:17 +00:00
3423145ca4
Add md0 to the raminst target.
1999-03-26 08:45:25 +00:00
202cdd3fa1
build audio[0123] links.
1999-03-26 04:37:29 +00:00
9fe0d93bdb
Nuke the line 'raidctl -r raid$dev'. a) The '-r' option is now '-i', and
...
b) with component labels and clean-bits working, this shouldn't be
required at all on each boot! Thanks to Andrew Gillham for pointing this out.
1999-03-26 01:11:45 +00:00
29fbd4fd08
change user `nobody's group from 9999 (non-existant) to 39 (group `nobody').
...
from Soren S. Jorvang <soren@t.dk> in [misc/6806]
1999-03-25 07:00:43 +00:00
cb9aa929b6
add ttyEcfg
1999-03-24 23:46:37 +00:00
d8f89f1b7b
install wscons.conf
1999-03-24 20:12:21 +00:00
61b6b3bfec
- Support dhclient and dhclient_flags rc.conf variables.
...
- Start dhcp client if dhclient==YES.
1999-03-24 19:03:10 +00:00
8572695519
- Move critical filesystem mounting code into a shell function and put
...
that in rc.subr.
- Support critfs_require_network rc.conf variable.
1999-03-24 18:59:47 +00:00
fce1081120
Add critfs_require_network, dhclient and dhclient_flags variables.
1999-03-24 18:50:07 +00:00
18e25765c1
Add ttyEcfg.
1999-03-22 14:05:34 +00:00
6ba6fa5b90
Add ttyE? lines for wscons.
1999-03-22 10:25:52 +00:00
8e621ce2ee
Add MIDI and sequencer devices. They seem to work, even.
1999-03-22 07:52:56 +00:00
0d8649853c
Add the ttyEcfg devices and create the wscons devices as standard.
1999-03-20 03:00:20 +00:00
835e4d99ed
change to new syslog socket. make symlink from old to new location, too.
1999-03-19 00:35:44 +00:00
ee6f8c2579
Add a commented-out duplicate id checker which doesn't exclude toor, and
...
add a comment saying how to switch it on.
1999-03-17 19:11:05 +00:00
1cc109aa7d
rc.wscons can take arguments, so we shouldn't simply source it but exec in
...
a subshell. Being here, add a prototype wscons_flags variable.
1999-03-17 15:49:47 +00:00
56fe49bc20
toor is back, disabled by default as before.
1999-03-17 03:01:54 +00:00
d32be9a273
Modify duplicate user id check to exclude "toor". Any other uid 0
...
accounts will generate a message with that (those) account names, root, and
toor present in the list.
1999-03-17 02:58:11 +00:00
9380518844
Revert to status quo ante (root's shell is csh, per BSD tradition),
...
pending the proper procedures for making such a change.
1999-03-16 23:24:02 +00:00
5d88663f76
Add the dty (dialout) device nodes for the serial driver.
1999-03-16 11:00:46 +00:00
7153b55a87
Fix PR 5068 - scanning ~user/.rhosts files on NFS mounted home
...
directories with -maproot=nobody on the server. The argument to be
made is that if NetBSD's root can't read these files, it shouldn't
try to check them.
1999-03-16 06:18:17 +00:00
294d60fff0
Make wscons configuration nicer: split database and configuration script.
...
From Matthew Green.
1999-03-15 22:02:24 +00:00
3f7861830b
This was not intended to be committed - back out.
1999-03-15 16:42:46 +00:00
8613009f6a
Give root a Bourne shell.
1999-03-15 16:36:38 +00:00
eb710b1b56
It was just Plain Wrong to ship a password file that triggers /etc/security.
...
Remove toor - if people want another root account, we'll assume they can
copy and modify the root line.
1999-03-14 20:11:06 +00:00
0fc97689ec
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc
...
if it is set
1999-03-14 14:04:40 +00:00
b0d64df6ba
first cut on a wscons configuration script
...
(to be included in / sourced from rc.local)
1999-03-13 14:54:22 +00:00
a443f8c15c
Make the includes and install targets consistent, and shove the
...
ugly hack into the etc/Makefile distribution target instead of
the top-level build target. Problem noted by Mycroft.
1999-03-10 19:10:14 +00:00
1fad0940a8
Need pseudo-ttys on INSTALL disk now (due to sysinst).
1999-03-09 19:31:00 +00:00
34d3f1c35f
Add comment that release is a synonym for snapshot, and make release
...
present everywhere snapshot is.
1999-03-08 02:37:56 +00:00
73230d62d0
Only install ld.so.conf on machines where we install ld.aout_so.
1999-03-05 07:21:44 +00:00
93466b768a
/var/spool/ftp/pub (if present) is better 0775 thane 0777.
...
From Paul Goyette <paul@whooppee.com>
1999-03-05 05:54:23 +00:00
33403acaba
If ppp_peers is set, ensure /usr is mounted since pppd is in /usr.
...
(Modeled on rc.lkm setup)
1999-03-02 23:10:17 +00:00
f4db3c5d7a
Add target for raid devices.
1999-02-27 17:57:31 +00:00
cc2777e5d4
Add pty0 to "floppy".
1999-02-26 12:01:36 +00:00
37c5e1f843
Some machines actually do have two floppy drives.
1999-02-23 14:56:26 +00:00
c326e60e4c
Fix the ttyC*and ttyZ* entries to correctly parse the unit number.
1999-02-21 18:09:24 +00:00
332dbe4b37
Fix a typo noticed by Frederick Bruckman (fb@enteract.com) in PR#7023.
1999-02-21 00:34:43 +00:00
2a3b5c65d2
It's about time we had an /etc/fstab example with SCSI disks.
1999-02-20 00:22:43 +00:00
b50caeda28
Update MAKEDEV to create cd2401 tty devices. Add getty entries in
...
"/etc/ttys" for same.
1999-02-20 00:21:28 +00:00
72e04f8dd5
Make "make release" work without US domestic source
...
and with more than one extra kernels.
1999-02-19 05:58:40 +00:00
108440dc7b
The "secr" set is not made by default by maketars; add stuff to
...
make it unless EXPORTABLE_SYSTEM is set.
1999-02-18 19:42:51 +00:00
36fe2839e4
Remove "tar" command from EXTRA_KERNELS section; those files are
...
expected to be ".gz" not ".tgz"
1999-02-18 19:03:44 +00:00
dade5b2993
Handle + in master.passwd (From PR#4802).
...
Also, handle + in group and allow max_loginlen to be configurable.
1999-02-18 18:53:32 +00:00
150ff2fe29
Add fd*, and create fd0 in the default set of devices.
1999-02-18 07:36:57 +00:00
6ccd18ba1f
remove duplicate aliases
1999-02-14 00:43:38 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
205851f433
Use slightly cleaner syntax for release/snapshot target.
1999-02-11 22:48:11 +00:00
f0ddf07eb2
Add a `release' target, which is a synonym for `snapshot.'
1999-02-11 18:19:21 +00:00
7ad02c1392
Add some more directories under /usr/share/locale.
1999-02-11 17:10:13 +00:00
1a71527c29
Add /usr/share/info, and /usr/share/locale/{de,fr}/LC_MESSAGES.
1999-02-11 14:39:35 +00:00
c95ddabf17
Change a BUILD to an UPDATE that I missed in the last commit.
1999-02-09 19:55:58 +00:00
caacb26e31
Make a /usr/share/ldscripts directory.
1999-02-09 17:41:13 +00:00
fb1e232640
Remove /usr/include/bfd.
1999-02-09 17:35:27 +00:00
6f443e73b3
No need to involve awk in the securelevel part, since sysctl has the -n switch.
...
Pointed out by NAKAJIMA Yoshihiro.
1999-02-07 14:56:01 +00:00
c8a68d41ad
.ifndef BUILD should be .ifndef UPDATE (to avoid `make clean').
1999-02-07 06:51:41 +00:00
cad34284f4
Use peers too when setting the time via ntpdate.
1999-02-07 00:47:08 +00:00
1b01f4840e
Add missing '' for awk in the securelevel part.
1999-02-06 23:22:31 +00:00
3c931ccd09
add postfix config and spool directories
1999-02-05 18:51:47 +00:00
3f8da8212c
Sendmail will be in libexec/sendmail/sendmail
1999-02-05 18:11:23 +00:00
d93b2ea892
Add libexec/postfix and libexec/sendmail
1999-02-05 18:06:41 +00:00
7d1e96cc2f
Update all this crap so that `make snapshot' makes snapshots in release(7)
...
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.
1999-02-05 03:01:49 +00:00
275e4ce247
wscons is default now - replace the "ttyv0" getty by a number of
...
"ttyEn" lines.
Thanks to "Johnny C. Lam" <lamj@stat.cmu.edu> for pointing out.
1999-02-02 14:33:04 +00:00
37ac3cf82a
Add an entry for 2.88MB floppies, even though we can't write them
...
directly yet. Useful for El Torito bootable CDs, though.
1999-02-01 20:20:00 +00:00
e4603ca8f7
oops, that's -n not -z. pointed out by hubert...
1999-02-01 00:34:25 +00:00
4471dfd72e
oops, do not set a default securelevel.
1999-02-01 00:32:52 +00:00
eddf0f4e2c
increase the securelevel (using the same rules as before) much earlier in the
...
boot process. before cron, sendmail, inetd, etc, are run, but after lkms are
loaded. this avoids the chances of `@reboot', mail .forwards, remote logins,
etc., happening before the securelevel has been raised.
1999-01-31 08:46:58 +00:00
32a8cb8434
Make /var/spool/news owned by news:news.
1999-01-29 00:55:16 +00:00
93fc448539
Add tty2 to 'all' and 'floppy' targets (that's how a PnP or pcmcia modem
...
will get called with a standart kernel).
1999-01-27 10:26:08 +00:00
15cbf62c66
Remove double line for bpf[0-3].
1999-01-26 12:49:24 +00:00
b8f30a5c4b
fix some space lossage.
1999-01-26 07:35:54 +00:00
d7ec8ee3a8
Because PCVT only offers 8 virtual consoles by default create only 8
...
device nodes. Fixes PR port-i386/6876 by Scott Telford.
1999-01-25 21:44:22 +00:00
1b330ec8ea
Add newsmips etc stuff.
1999-01-24 12:36:36 +00:00
075abac71c
My own special /etc.
1999-01-23 21:03:22 +00:00
b00e7a4162
add missing colons (this is what happens when you cut & paste from a
...
man page...)
noticed by Dave Huang in [lib/6865]
1999-01-23 08:07:05 +00:00
727235938f
update to show current defaults
1999-01-22 03:39:10 +00:00
434ecb8754
Fix the serial number.
1999-01-22 01:44:22 +00:00
09e3c8fe87
Make the default named configuration more ... sane.
1999-01-22 01:41:19 +00:00
d0798bd8bd
kbd -> wskbd, mouse -> wsmouse
1999-01-19 22:27:35 +00:00
d7a2e284b1
Check for location of xdm's pid file as suggested by Simon Burge.
...
Fixes PR misc/6828 by Paul Goyette.
1999-01-18 20:41:54 +00:00
4722795220
Add ttyE0.
...
Turn off console, turn on ttyE0 and tty00.
1999-01-17 12:32:52 +00:00
f1a39bf406
install sample nsswitch.conf
1999-01-16 14:25:47 +00:00
a6e0ab6a8c
On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
...
create at least eight bpf dev entries. (All except atari).
1999-01-16 01:40:27 +00:00
3b8254b9e8
add "ttyEcfg" (for display-global wscons configuration)
1999-01-13 17:41:44 +00:00
245b4ce93b
Add ldaps (ldap over ssl).
1999-01-13 13:32:22 +00:00
f0fd4bc1ff
Change "floppyinstfs" size to 1.5MB
1999-01-13 10:51:06 +00:00
97a24ca055
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 12:42:46 +00:00
f6cc762de0
Enable cron to be turned on and off from rc.conf, like other daemons.
...
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 04:58:37 +00:00
4b0bbbdbe6
Add $portmap_flags variable, now that portmap has optional flags, and
...
by default, pass '-l' flag (libwrap logging) by analogy with inetd
1999-01-11 21:04:38 +00:00
1b4e37c926
grow the instfs a little, inline with bootfs changes.
1999-01-10 13:23:37 +00:00
20b53e9bfb
do not create xd or xy devices for the floppy. add a cd1 and some more sdNs
1999-01-10 12:56:06 +00:00
dd22f79d3e
Install /etc/skeykeys 600 - from PR6519 by andrew@untraceable.net, tested OK.
1999-01-06 06:08:37 +00:00
8ab9483f37
save a copy of the boot messages. Closes 6398 from msanders@confusion.net
1999-01-06 03:41:44 +00:00
0780a6b041
Add a comment about why you do not want to uncomment the finds.
1999-01-06 03:24:06 +00:00
4a68122756
Add entries for LDAP (Lightweight Directory Access Protocol)
1999-01-05 14:35:19 +00:00
7d0d25360f
Add support for RAIDframe configuration as suggested by Eric S. Hvozda
...
in PR install/6676.
1999-01-04 00:49:36 +00:00
2ebc95cb82
SMALL instead of ALL for snapshot.
1999-01-03 14:49:39 +00:00
ced6fe4b11
Add sections `l' and `n' for pkg, X11, local. DTRT with manual pages
...
ending with `.n'. XXX: Does not DTRT for manual pages with
multi-character extensions (i.e. 3f) yet!
1999-01-02 23:50:40 +00:00
cf886c5ea2
Added /usr/share/doc/xntp for PR 5405
1999-01-02 18:47:09 +00:00
654bed5b5c
applied patches from port-next68k/6708: add wscons devices to next68k MAKEDEV
1999-01-02 13:06:54 +00:00
7b08b77240
If "output" field in "lkm.conf" is set to "TEMP" create output file in
...
"/tmp" and remove it after loading.
1998-12-29 16:29:23 +00:00
55afeae4b0
Add USB devices.
1998-12-29 04:51:54 +00:00
5d4a051b53
add mailer.conf, and leave a bit more room in the BIN1 lines for the future
1998-12-25 22:18:19 +00:00
0e30defab5
Add a "mailer.conf" file for the mailwrapper program.
...
Note that the paths named in this initial mailer.conf are almost
certainly going to have to be changed -- sendmail.sendmail will
probably turn into libexec/sendmail/sendmail or some such.
1998-12-25 22:11:49 +00:00
d26897ab43
Separate hardware daemons and add comments.
1998-12-22 13:58:37 +00:00
ab896b23d2
oops, add the sparc64 dirs here. sorry nathan :)
1998-12-21 08:36:07 +00:00
84ed4e094e
Use "#" instead of "//" for comments.
1998-12-15 01:08:43 +00:00
f81e3fe5de
Add example entries for PPP login, per PR#6462
1998-12-12 19:35:48 +00:00
17107d39eb
Add wd[01] in all and floppy.
1998-12-10 21:18:07 +00:00
af27a191a5
Add ugen device.
1998-12-09 01:47:15 +00:00
d31303074e
Make ugen devices. None are created by default.
1998-12-09 01:11:26 +00:00
2a5432c589
Use shell arithmetic instead of awk. (avoid awk in miniroot).
1998-12-08 21:43:06 +00:00
034bc394ac
Add wscons to `all' since its absence annoyed perry.
1998-12-07 18:46:27 +00:00
15961a8384
Add creation of le-nodes to MAKEDEV script (from 'maximum entropy'). Fixes
...
pr-6539.
1998-12-07 13:39:10 +00:00
76ee97dd88
do not start usbd by default.
1998-12-06 08:37:29 +00:00
f5ee517bd1
Add the ching data directory back commented out, at Perry's request
1998-12-06 04:37:43 +00:00
7c1bfd3ac1
Remove /usr/share/games/ching, as we do not distribute ching(6)
1998-12-05 22:59:21 +00:00
11f3c29221
Add USB devices.
1998-11-29 06:57:46 +00:00
d84c950796
Add some files to security check and backup.
1998-11-25 08:30:42 +00:00
a0a84e0575
Cannot use 'logger' as /usr is normally not mounted here.
1998-11-25 03:54:27 +00:00
a8e48ccd6e
Fix RAIDframe typo. (Reported by msaitoh@netbsd.org)
1998-11-21 23:41:13 +00:00
483a921963
allow /var/crash to be a symlink to a directory
1998-11-21 03:00:38 +00:00
deee1418c3
Fix syntax for sshd, per PR 6469 by Paul Dokas <dokas@cs.umn.edu>
1998-11-20 17:26:32 +00:00
c801fd815d
BIND 8 is the default now.
1998-11-19 19:53:33 +00:00
699dda2896
bebox etc files.
1998-11-18 08:49:33 +00:00
22bc029ea1
Add 'md' devices for ramdisk; make as part of 'minimal'.
...
Clean up 'all', and comment-in /dev/lkm.
1998-11-17 23:09:46 +00:00
5d02b7f1b1
Support 'MAKEDEV minimal' for ramdisk scripts. Fix 'dz' alias for dc ttys.
1998-11-17 19:02:46 +00:00
b021f1bf0e
Add pmax disktab entry for 'miniroot' (currently a full root image).
1998-11-17 02:41:31 +00:00
81679d5682
Comment out lines corresponding to LK-201 keyboard and DEC serial mouse.
...
Fixes PR port-pmax/5389.
ttyflags -a clobbers them even if they are set to `off', overriding
the 4800-bit and parity modes needed by the DEC serial kbd/mice.
1998-11-16 01:31:36 +00:00
104df2d354
Add some often-used floppy entries.
1998-11-14 10:33:27 +00:00
8bfd722a35
Added RAID devices for everyone!
1998-11-13 04:49:01 +00:00
0c3c3e6c25
Change commented-out sshd startup to use /usr/pkg/etc/rc.d/sshd.sh
1998-11-05 01:36:09 +00:00
2c6f26cf27
Pay attention to NO_SENDMAIL and USE_BIND8
1998-11-02 03:32:22 +00:00
96cda5fe94
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf
...
(default is YES). Kills xdm and waits for it to terminate if it was enabled
in rc.conf (based on a code snippet from Ignatios).
1998-10-29 20:24:56 +00:00
4254ec31f8
Nuke /usr/src and /usr/pkgsrc from here. They are created when the source
...
tar files are unpacked, so having them here is pointless.
1998-10-28 09:23:23 +00:00
d7f8b7b2e3
Add wscons.
1998-10-18 11:40:45 +00:00
7490553d67
Add /dev/scsibus* device nodes.
1998-10-15 21:22:51 +00:00
e72f64b7ee
Nuke symlink /dev/ttyv0 -> /dev/vga It isn't needed any more.
...
(If any linux emulation needs this, it can go in the linux emul
directory in the emulation package.)
1998-10-12 21:05:24 +00:00
03cde6e019
Use "${MAKE}" instead of "make" for cross compilation.
1998-10-09 10:40:59 +00:00
7f94d46701
Add wscons device files.
1998-10-06 02:48:18 +00:00
b5c33ac84d
Add an example configuration file for BIND 8.1.2.
1998-10-05 18:26:03 +00:00
christos