will be extended to other appropriate ports in future. Note as such in the
bugs section.
This is an MI man page, so should not be flagged as i386 in the header.
This allows easy configuration of banner text, console device and timeout
as well as allowing menus of commands to be displayed. If /boot.cfg
is not present, then the existing behaviour does not change.
The sections in the boot loader source are surrounded by #ifdef SMALL
allowing this functionality to be removed if space is at a premium.
and we need to add 1 to it to get the size of the LUN.
Revert Max LBA calculation when returning the Maximum LBA from the target
to the iinitiator, following an email conversation with Jonathan Kollasch,
who points out a number of things:
+ the NetBSD scsipi driver reads the value returned by the drive and adds
one to it, so that standard SCSI drives return the 0-based Max LBA in a
READ CAPACITY command.
+ it is up to the initiator to add 1 to the Max LBA to find out the size
of the LUN (Jonathan verified this by using the UNH iSCSI initiator on
to a NetBSD target)
+ an analogous change to the NetBSD target (revision 1.34 of
disk.c) is needed.
http://mail-index.netbsd.org/tech-kern/2007/11/09/0001.html
sysmon_envsys_create() and sysmon_envsys_destroy() were added to
create/destroy sysmon_envsys objects (and its TAILQ/LIST for sensors/events).
sysmon_envsys_sensor_attach() and sysmon_envsys_sensor_detach() were
added to attach/detach sensors to a specified sysmon_envsys device.
The events framework is now per device and configurable via the
ENVSYS_SETDICTIONARY ioctl or /etc/envsys.conf and envstat(8).
Update all users and documentation to reflect these changes.
- The driver now uses the Super I/O address port as port argument in
the configuration file. The Environmental Controller base address is
fetched by the Super I/O EC LDN configuration registers.
- Invalidate voltage sensors if data returned is 0xff.
- Use the Super I/O Global Configuration Registers Chip ID[12] and Device
Revision to store/print the correct information.
- Use only the Fan Extended Tachometer registers on IT871[68]F for now;
this gives us correct data for IT8705/IT8712F again.
Inspired by the smsc(4) driver. The UPDATING file has been updated to
reflect the rename.
Modify the afterboot(8) manual page to explain how to run the tests
installed alongside the system. This is something the user should do
after configuring it to ensure that it works and that it is stable on
his hardware.
This adds a new tests.tgz set to releases which includes all the tests
for the system. It is important to note that this set does not rely on
comp.tgz: a user of the system can run the tests without having the
development tools installed, which can be useful in a production machine.
This file simplifies the build of test programs, either written in C++
or in sh. It hides the internals of atf, e.g. by silently linking
against -latf or calling atf-compile.
It also takes care of installing an Atffile for each new test directory.
This adds support for a new set of variables, PROGS and PROGS_CXX, that
allow the developer to build multiple different programs from a single
source directory.
This change adds the ATF manual pages that are not tied to any specific
tool nor library. It also adds some distribution documentation to the
system, as this is linked to by the manual pages (plus we have to install
the license text to comply with its terms).
This adds reachover Makefiles to build the libatf library and enables it in
the parent Makefile.
Things to review in this change:
* Add proper version numbers in the shlib_version files.
* Is libatf properly listed in lib/Makefile? It theoretically needs
libstdc++, but the resulting binary library is not linked against it.
the code. This provides 14 voltage sensors in addition to the previous
3 temperature sensors supported in the TMS logical device.
Adapted from OpenBSD, tested by dyoung.
libpuffs.
With a round of applause to Antti Kantee for helping out with puffs
debugging, and a huge thank you to Greg Oster, who has fixed numerous
bugs over the last week (unfortunately, the bugs are all mine), and
provided enthusiasm and drive.
Right now, the initiator is fulling working for only a single target,
and should be considered to be in a state of flux. Having said that,
Greg completed a run of build.sh with the storage on the iSCSI target,
and found times to be within 0.5% of direct attached storage. Cache
effects apply.
The initiator should be portable to everything that uses the FUSE
interface. That's right - a portable iSCSI initiator.
Storage (LUNs exported by the target) is, at the present time,
presented as a regular file called "storage". This will likely
change in the future.
% priv obj/iscsifs -u agc inspiron1300 /mnt &
[1] 13158
inspiron1300.wherever.co.uk: 10.4.0.42:3260,1 iqn.1994-04.org.netbsd.iscsi-target:target0
inspiron1300.wherever.co.uk: 10.4.0.42:3260,1 iqn.1994-04.org.netbsd.iscsi-target:target1
% ls -al /mnt/inspiron1300.wherever.co.uk/target0/
total 576
drwxr-xr-x 2 agc agc 512 Nov 8 21:07 .
drwxr-xr-x 2 agc agc 512 Nov 8 21:07 ..
lrw-r--r-- 1 agc agc 44 Nov 8 21:07 hostname -> inspiron1300.wherever.co.uk
lrw-r--r-- 1 agc agc 9 Nov 8 21:07 ip -> 10.4.0.42
lrw-r--r-- 1 agc agc 16 Nov 8 21:07 product -> NetBSD iSCSI
-rw-r--r-- 1 agc agc 104857088 Nov 8 21:07 storage
lrw-r--r-- 1 agc agc 43 Nov 8 21:07 targetname -> iqn.1994-04.org.netbsd.iscsi-target:target0
lrw-r--r-- 1 agc agc 8 Nov 8 21:07 vendor -> NetBSD
lrw-r--r-- 1 agc agc 4 Nov 8 21:07 version -> 0
FFS needs a block device, and so vnconfig can be used to sit on top of
the regular file.
% mount -vv | grep iscsifs
/dev/puffs on /mnt type puffs|refuse:iscsifs (nosuid, nodev, fsid: 0xcb04/0x6acb, reads: sync 0 async 0, writes: sync 0 async 0)
% priv vnconfig vnd0 /mnt/inspiron1300.wherever.co.uk/target0/storage
% priv mount /dev/vnd0a /iscsi
% df
Filesystem 1K-blocks Used Avail %Cap Mounted on
/dev/dk0 28101396 21491182 5205146 80% /
kernfs 1 1 0 100% /kern
procfs 4 4 0 100% /proc
ptyfs 1 1 0 100% /dev/pts
/dev/puffs 0 0 0 100% /mnt
/dev/vnd0a 99214 8209 86045 8% /iscsi
% mount -vv | grep iscsi
/dev/puffs on /mnt type puffs|refuse:iscsifs (nosuid, nodev, fsid: 0xcb04/0x6acb, reads: sync 0 async 0, writes: sync 0 async 0)
/dev/vnd0a on /iscsi type ffs (local, fsid: 0xe00/0x78b, reads: sync 1 async 0, writes: sync 2 async 0)
servers. Calling daemon() (i.e. fork()ing) inside a library can
cause nice surprises for e.g. threaded programs. As discussed with
Greg Oster & others.
directories and Makefiles from src/usr.sbin/bind to src/lib; make
BIND libraries build shared. Saves about 1MB-1.5MB per installed
executable, about 5MB for a base+etc minimal installation of NetBSD.
http://mail-index.netbsd.org/current-users/2007/07/16/0012.html
- Introduce sme_class into the sysmon_envsys struct to specify a
class; currently there are two classes: SME_CLASS_ACADAPTER and
SME_CLASS_BATTERY.
- Add a new envsys event: PENVSYS_EVENT_LOW_POWER that is reached when
all SME_CLASS_BATTERY devices are in CRITICAL/LOW state and there's not
any SME_CLASS_ACADAPTER connected.
- Add the 'low-power' event into the sensor_battery script that will
shutdown the system gracefully via 'shutdown -p'. If powerd(8) is
not running, cpu_reboot(9) with RB_POWERDOWN is used.
- Make acpiacad(4) a SME_CLASS_ACADAPTER device and acpibat(4) a
SME_CLASS_BATTERY device.
Update the documentation accordingly to these changes.
- Instead of hooking the handler on the specdev of a mounted file system
hook directly on the `struct mount'.
- Rename from `vn_cow_*' to `fscow_*' and move to `kern/vfs_trans.c'. Use
`mount_*specific' instead of clobbering `struct mount' or `struct specinfo'.
- Replace the hand-made reader/writer lock with a krwlock.
- Keep `vn_cow_*' functions and mark as obsolete.
- Welcome to NetBSD 4.99.32 - `struct specinfo' changed size.
Reviewed by: Jason Thorpe <thorpej@netbsd.org>
Thank you, wiz, for the few mandoc suggestions.
I slightly reworded part of the description and removed the
advertising clause from the version I posted to tech-userlevel.
- remove the `submatch' argument of config_found_ia()
- precise that config_found_ia() callis config_found_sm_loc() with both
`locs' and `submatch' set to NULL
avoid wasting unbelievable amounts of memory, set the blocksize to
something more believable. Should fix the memset-part to act only
up to the size the file is extended to, though.
default. To enable it, set netbsd-knf-whitespace-check to 't'. See
the help message for this variable for related knobs and issues. This
was tested on emacs 21.4 and 22.1. (From Anon Ymous)
Exports some sensors through the envsys(4) framework available
in some Thinkpad laptops.
Ported by Pierre Pronchery from OpenBSD, via PR port-i386/36852.
Tweaks, LKM and misc improvements by me. Added into i386/GENERIC
commented out.
This utility uses FreeBSD's libfetch (updated for NetBSD, and to quieten
lint) to provide a BSD-licensed ftp/http/https file system similar to the
old alex utility. The full URL is used as the path underneath the "/ian"
mountpoint.
Sample use as follows:
[19:09:38] agc@inspiron1300 ...examples/refuse/ian 126 > priv ian/obj/ian /ian
[19:09:55] agc@inspiron1300 ...examples/refuse/ian 127 > cat /ian/ftp://localhost/motd
NetBSD 4.99.27 (INSPIRON) #4: Tue Aug 7 13:04:33 BST 2007
Welcome to NetBSD!
This system is running a development snapshot of the NetBSD operating system,
also known as NetBSD-current. It is highly possible for it to contain serious
bugs, regressions, broken features or other problems. Please bear this in mind
and use the system with care.
You are encouraged to test this version as thoroughly as possible. Should you
encounter any problem, please report it back to the development team using the
send-pr(1) utility (requires a working MTA). If yours is not properly set up,
use the web interface at: http://www.netbsd.org/support/send-pr.html
Thank you for helping us test and improve NetBSD.
[19:10:17] agc@inspiron1300 ...examples/refuse/ian 128 > df
Filesystem 1K-blocks Used Avail %Cap Mounted on
/dev/dk0 28101396 19491972 7204356 73% /
kernfs 1 1 0 100% /kern
procfs 4 4 0 100% /proc
ptyfs 1 1 0 100% /dev/pts
/dev/puffs 0 0 0 100% /ian
[19:10:21] agc@inspiron1300 ...examples/refuse/ian 129 > ls -al /ian/ftp://localhost/motd
-rw------- 1 root wheel 705 Aug 28 19:10 /ian/ftp://localhost/motd
[19:10:42] agc@inspiron1300 ...examples/refuse/ian 130 > ls -al ~ftp/motd
-rw-r--r-- 1 ftp ftp 705 Aug 27 21:33 /home/ftp/motd
[19:10:53] agc@inspiron1300 ...examples/refuse/ian 131 >
