db846246ba
Add video registers and other defines for Falcon video.
1995-08-17 20:34:04 +00:00
44d433786d
Remove 2 wrong proto-types.
1995-08-17 20:32:50 +00:00
a1fe704278
Initialize the YM sound-chip to a sane state.
1995-08-17 20:31:31 +00:00
049a3d5a4d
clean up the whitespace, and kill the 4BSD SCSI code comments
1995-08-17 18:50:34 +00:00
c9dbf2d1d2
clean up 7/26 de snapshot import
1995-08-17 18:04:55 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
555a22e058
Add the ccd.
1995-08-17 17:38:42 +00:00
77d85de272
New version of ccd. Allows dynamic run-time configuration and
...
unconfiguration and supports disklabels.
1995-08-17 16:31:30 +00:00
28c60eacc1
Add disk types for the ccd and vnd.
1995-08-17 16:26:54 +00:00
647f483937
Remove turbochannel slot_hand_fill functions and all references
...
to them.
1995-08-17 09:27:18 +00:00
2c6601a704
Remove lint in the intializer of the table used to glue new-config
...
drivers and the old-config PMAX-specific scsi drivers.
1995-08-17 06:54:56 +00:00
760379d766
Update for signal handling changes.
1995-08-17 03:07:47 +00:00
873ed30f83
so_pcb should be a void *.
1995-08-17 02:57:20 +00:00
42802ac2fa
Drop si_minphys().
1995-08-16 23:01:16 +00:00
68b61ea1ad
Fix comments. .space 0x1000 was accidentally left commented so it
...
still is--just explicitly, now.
1995-08-16 13:18:24 +00:00
37004a19e4
Missing cast and semicolon in last.
1995-08-16 05:17:31 +00:00
a2e0a97608
check for null subclass pointer. From Todd Mummert
1995-08-16 04:54:50 +00:00
2c03307168
If updating the timeval would make it negative, zero it instead.
1995-08-16 04:50:17 +00:00
665a6a78bc
Load the old MacOS ROMBase value back in before we jump to reset.
1995-08-16 04:48:34 +00:00
dc41c4257e
Allow bogus timevals, per Linux.
1995-08-16 04:29:49 +00:00
54c148fda5
Convert 230400 baud.
1995-08-16 04:14:51 +00:00
4e18827511
Garbage collect.
1995-08-16 01:04:06 +00:00
a87c08a36e
Access rights are now stored in MT_CONTROL mbufs. Document this.
1995-08-16 01:03:19 +00:00
26c674e349
Allocate PCBs with malloc(), not MGET().
1995-08-16 00:38:53 +00:00
af8b19a276
Allocate PCBs with malloc(), not mgetclr().
1995-08-16 00:32:40 +00:00
0ecd5256ad
Allocate PCBs with malloc(), more mgetclr(). Be more careful to free the
...
PCB after it's done with.
1995-08-16 00:29:50 +00:00
02b3c95be6
Implement the rest of the sysv ipc calls ({sem,msg}*())
1995-08-15 21:14:32 +00:00
238eb3d35a
Correct a comment re. splnet
1995-08-15 17:41:38 +00:00
3d4ed382f6
Catch up with renamed SA_DISABLE flag and update
...
sunos_sigvec to allow the new SA_RESETHAND flag.
1995-08-15 17:28:02 +00:00
c331c7be82
Rename ss_flags bits.
1995-08-15 16:52:30 +00:00
72d03ec724
TDR config update (from Theo).
1995-08-14 20:32:38 +00:00
2666f17777
SCSI bus phase not valid until REQ is true (Fix from David Jones).
1995-08-14 20:00:00 +00:00
de80daa3cd
Make MCOUNT() PIC-safe.
1995-08-14 15:44:36 +00:00
3560df43af
CHINON CDS-535 version Q117 also needs NOLUNS. Assume all 535s do.
1995-08-14 13:01:42 +00:00
d23236204d
When resetting a signal, change ps_sigact, just to be sure.
1995-08-14 06:07:55 +00:00
26fbf3bbb8
prototype inline functions, almost as suggested by Jonathan Stone in PR 1258.
1995-08-14 05:43:24 +00:00
f215ae1873
prototypes for d_mmap and dev_type_mmap, as suggested by Jonathan Stone in
...
PR 1259. prototype for dev_type_dump if not not __BDEVSW_DUMP_OLD_TYPE.
1995-08-14 05:05:55 +00:00
ae51ffca30
Always fail when probed--until this driver works.
1995-08-14 03:55:28 +00:00
64ea04b1d0
Be more vocal about interrupts that we don't expect.
...
Include ncrscsi.h and ncr96scsi.h.
1995-08-14 03:16:07 +00:00
e9d68a777e
Export bsd_to_linux_sig[], and use it.
1995-08-14 02:58:29 +00:00
96d6db2c1a
Export bsd_to_ibcs2_sig[], and use it.
...
Nuke ancient vmtime().
1995-08-14 02:27:30 +00:00
d2c9e4f1c8
Export bsd_to_ibcs2_sig[], and use it.
1995-08-14 02:26:01 +00:00
10c06fe363
Prototype some functions.
1995-08-14 02:22:20 +00:00
9b899c17cd
Export bsd_to_linux_sig[], and use it.
1995-08-14 02:19:08 +00:00
0a601c87ba
Rename two functions.
1995-08-14 02:13:42 +00:00
1e69f23205
Export bsd_to_svr4_sig[], and use it.
1995-08-14 02:07:57 +00:00
5c03d498db
Fix typos.
1995-08-14 01:47:03 +00:00
baaaba9bc5
Rearrange #includes.
1995-08-14 01:38:24 +00:00
283f211782
Sort.
1995-08-14 01:34:09 +00:00
01fa87477a
syscalls.master changed.
1995-08-14 01:29:05 +00:00
88b8e43a80
Rearrange #includes.
1995-08-14 01:27:43 +00:00
9440382c88
svr4_stack_t --> svr4_sigaltstack
1995-08-14 01:13:29 +00:00
05abc039c9
syscalls.master changed.
1995-08-14 01:13:11 +00:00
eba2f2e81a
Move signal types into signal.h.
1995-08-14 01:11:52 +00:00
3b76c0ddef
svr4_stack_t --> svr4_sigaltstack
1995-08-14 00:57:13 +00:00
475edc261c
Move definition of sigset_t into types.h.
1995-08-14 00:50:27 +00:00
a6bb142d21
Various clean up and bug fixes. Make this look like the SVR4 and Linux
...
versions.
1995-08-14 00:44:12 +00:00
ca057762b9
Minor cleanup.
1995-08-14 00:41:02 +00:00
1575859e07
Minor cleanup.
1995-08-13 23:37:56 +00:00
a6b7c740c6
Convert SA_RESETHAND and SA_NODEFER.
...
Scrub this code a bit.
1995-08-13 22:57:10 +00:00
fef558efaa
Convert SA_NOMASK and SA_ONESHOT.
...
Clean up this code a bit.
1995-08-13 22:55:28 +00:00
2e95cf3d31
Implement SA_RESETHAND and SA_NODEFER.
...
Only return SA_NOCLDSTOP in the sigaction struct for SIGCHLD.
Rename ss_flags bits.
1995-08-13 22:53:59 +00:00
e0d445350d
Add SA_RESETHAND and SA_NODEFER, as in SVR4.
...
Rename bits in ss_flags to SS_ONSTACK and SS_DISABLE; this makes more sense,
and it's what SVR4 does.
1995-08-13 22:51:24 +00:00
0b54b37344
Add ps_sigreset, to to keep track of signals which are reset when caught.
1995-08-13 22:48:47 +00:00
ad35618e1e
Linux doesn't allow select(2) to be restarted.
1995-08-13 17:51:40 +00:00
19f3c3099f
Another SDEV_NOLUNS device from paul@pgoyette.bdt.com (Paul Goyette).
1995-08-13 17:48:57 +00:00
36a94a031a
Lock the process in core before operating on it.
1995-08-13 09:05:51 +00:00
67daa4706d
Add PHOLD() and PRELE() macros, used to hold a process in core and release it.
1995-08-13 09:04:43 +00:00
f174a96f7b
Don't pass through SIOCGIFADDR, per Steve McCanne.
1995-08-13 04:15:38 +00:00
c8e379015c
Fix sysbeep() for the case of pitch == 0, and garbage collect a useless
...
variable.
1995-08-13 04:06:29 +00:00
7d55e1196e
Document spl()s a bit, order the splfoo()s in splX() order.
1995-08-13 01:52:16 +00:00
6deb1a5816
Fix comment on splnet().
1995-08-13 00:45:21 +00:00
0e29cb31fa
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:32:47 +00:00
a38e73b5a7
splnet --> splsoftnet
1995-08-13 00:32:02 +00:00
9a5c8b5f89
Add splsoftnet().
1995-08-13 00:31:28 +00:00
7eba547264
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:29:56 +00:00
af645f49fb
Make splimp() > spltty().
1995-08-13 00:29:03 +00:00
6cc376290b
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:27:11 +00:00
7a9cad50cd
Replace splnet() with splsoftnet(). Add splnet(). Make splimp() > spltty().
1995-08-13 00:23:56 +00:00
54c9a1df90
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:22:40 +00:00
ddd123a7c5
Replace splnet() with splsoftnet(). Add splnet(). Make splimp() > spltty().
1995-08-13 00:21:54 +00:00
79cecdbce0
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:20:52 +00:00
fa13d32c41
Add splsoftnet().
1995-08-13 00:16:08 +00:00
21bd4f21f6
Use splimp(), not splnet(), for now.
1995-08-13 00:07:17 +00:00
c5ec5c3003
Add splsoftnet().
1995-08-13 00:03:11 +00:00
5482957905
splnet --> splsoftnet
1995-08-12 23:59:09 +00:00
8887de9230
opri --> s
1995-08-12 22:58:01 +00:00
240560e9fd
ia_irq has not been a power of 2 for a long time...
1995-08-12 22:37:58 +00:00
8a9880e714
Fix oversight in previous.
1995-08-12 21:36:46 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
d9678d59b2
Fix up DVMA-related confusion. Disk boot now works.
1995-08-12 18:38:30 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
24644e5151
New version of NCR5380-SCSI driver. This version is far more generic than
...
the previous version. The machine dependent part contains the configuration
for both the TT and FALCON. The configuration files have been changed to
select SCSI-support for either TT, Falcon or both.
The configuration file for the Atari-Falcon will only get _really_ usefull
when the Falcon video part is finished.
1995-08-11 20:01:15 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
6a43b6e3a1
Re-port the Alpha versino of NetBSD's machine-independent LANCE driver
...
back to the DECstation. Boots on 3MAX and 3MAXPLUS. The bug-fixes
applied to this driver since it forked off the Decstation code also
seem to fix long-standing DMA problems with the Decstation SCSI driver.
1995-08-11 02:12:56 +00:00
0744a4dc6a
sync with hp300 version (cpu_coredump changes)
1995-08-10 19:46:45 +00:00
b256a1bf82
sync with hp300 version
1995-08-10 19:44:01 +00:00
939f7eb7d0
add bounds_check_with_label(), and thus sync with hp300 version.
1995-08-10 19:36:41 +00:00
f54a288467
minor alphabetize clean up
1995-08-10 19:18:02 +00:00
d65beaf096
add bcea[] (as per sun3 port)
1995-08-10 16:21:54 +00:00
37e46e6b64
clockattach() wasn't printing a newline; add it.
1995-08-10 10:50:58 +00:00
69f95bd2bb
Use "lance" as the name of the PMAX (kn01) Lance device, not "le", since
...
"lance" is what the Alpha drivers use.
1995-08-10 10:49:46 +00:00
0822ab0fe1
Map from NetBSD/Alpha names for machine-dependent functions (e.g.,
...
"force this pending write to complete") to the names used in NetBSD/pmax.
1995-08-10 05:29:11 +00:00
b42e35d645
Un-comment dependency on file cpu.c, since cpu.c has been commited to CVS.
1995-08-10 05:22:26 +00:00
0b4c870908
Change DEcstation autoconfiguration to use new-style config.
...
All devices except SCSI disks and tapes are found using new config only.
SCSI disks and tapes are configured using a table edited from an ioconf.c
produced by config.old.
Boots multi-user on PMAX, 3MAX and 3MAXPLUS. The old-style "slot hand fill"
functions for those machines, and the old TurboChannel configuration
main loop, have been removed.
Since new-style config runs later in boot than the old pmax turbochannel
probing, we no longer know what devices will be configured when consinit()
is called. Use PROM output until autoconfig is finished.
1995-08-10 05:17:07 +00:00
bc6e09fad6
Remove extraneous debugging printf()s when running on processors
...
this code has been tested on.
1995-08-10 04:31:46 +00:00
a1a7750426
Move IO ASIC interrupt-enable outside #ifdef DEBUG, where it had
...
accidentally snuck in. Clean up debugging messages and explicitly
give a warning on CPUs the code hasn't been tested on.
1995-08-10 04:30:41 +00:00
e3b5a34826
Update DECstation Lance ethernet driver to use new-style config.
1995-08-10 04:27:43 +00:00
88b9b7eb4a
Update DECstation drivers to use new-style config, removing
...
old-style config support, except for SCSI disks and tapes.
1995-08-10 04:21:35 +00:00
6f7dc7fd4e
Make this compile if one of SYSV{SEM,SHM,MSG} is not defined.
1995-08-10 04:08:57 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3ee59cd771
Fix oversight in previous change; spl*() must also block
...
software interrupts.
1995-08-09 01:47:37 +00:00
96f7ad7c6e
Add missing "priority" field value in KN02 "asic" configuration entry for
...
the Dallas-compatible real-time clock. The missing entry caused the offset
to end up in the "priority" field. New-style config now boots cleanly on a
KN02 (3MAX).
1995-08-09 01:21:43 +00:00
67ad80c6ed
Not really useful anymore.
1995-08-08 22:28:32 +00:00
75dc312695
Do errno translation when emulation needs it.
1995-08-08 21:11:47 +00:00
ee8dd73508
Make this link with PMAP_DEBUG turned off.
1995-08-08 21:10:18 +00:00
73d4eba4cf
Only allow mmap in "managed" RAM for now.
1995-08-08 21:09:01 +00:00
fafc2a527a
Fix signed/unsigned comparison in dumpconf().
1995-08-08 21:07:52 +00:00
106e4e8c4a
Fix "oops" line that was supposed to increment tv_usec
...
(just to make sure time keeps moving 8^)
1995-08-08 21:05:48 +00:00
dac3687c31
Make it work with obj dirs. (from Jason Thorpe)
1995-08-08 21:02:04 +00:00
7eda63e726
Get rid of libnet
1995-08-08 21:00:00 +00:00
b090a64678
Add bcea[] here now that is is gone from arp.c
1995-08-08 20:59:07 +00:00
59078e8a4b
Cosmetic (fix order)
1995-08-08 20:57:51 +00:00
239821855f
Add default value for SHMMAXPGS (from Jason Thorpe - fixes PR#1220)
1995-08-08 20:56:45 +00:00
c96c328a9d
Use old-style function definitions (like the sparc driver).
1995-08-08 20:54:08 +00:00
2a3eef935e
Improve handling of a device that "sits on" the bus (from Jason Thorpe)
1995-08-08 20:53:16 +00:00
9ede017ccb
Set TIMEZONE=0, DST=0 (which is correct for the hardware clock).
1995-08-08 20:51:26 +00:00
19969f2fe2
Use RPCAUTH_UNIX in requests to please picky NFS servers.
1995-08-08 20:43:43 +00:00
0b486f9aa0
Add bounds_check_with_label().
1995-08-08 06:23:08 +00:00
e4413d1a10
Fix another comment.
1995-08-07 14:26:51 +00:00
f657f5bf3e
Make this interface simplex. It's more efficient, and sidesteps the
...
problem of receiving our own multicasts in promiscuous mode. Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
19e02269b2
New-style config (config.new) autoconfiguration code for Decstation
...
turhsturbochannel machines. Lifted wholesale from cgd's Alpha
turbochannel code, with changes that reflect the slightly different
bus topology and `slot' numbering on Decstations.
1995-08-07 07:07:43 +00:00
8e77047f2c
Make new-style core dumps.
1995-08-07 06:13:57 +00:00
bc59b73733
Merge npxinit() into npxdna(), and remove duplicated code.
1995-08-06 19:48:58 +00:00
b725d8b30b
Update the comment describing how this works.
1995-08-06 19:31:49 +00:00
3c20501d57
Clear MDP_USEDFPU on exec. Set it in process_write_fpregs() unconditionally,
...
for the benefit of the emulator.
1995-08-06 19:01:14 +00:00
ef504e724d
Fix oversight in previous.
1995-08-06 18:05:22 +00:00
764d69bf8e
Make process_write_fpregs() safe.
1995-08-06 18:02:22 +00:00
d730fead60
Eliminate direct uses of curproc in npxdna() and npxinit().
1995-08-06 17:59:10 +00:00
0affdcf4d8
Pass curproc to npxdna().
1995-08-06 17:54:35 +00:00
ccdf6ac81b
Change le0 iosiz.
1995-08-06 16:14:29 +00:00
a326c49adf
Stop using cr0 to flag that the FPU has not been used.
1995-08-06 06:05:28 +00:00
leo