msaitoh
8796b43e1c
remove sys_vtrace()
2000-04-13 15:54:27 +00:00
msaitoh
c750d5f42d
- save/restore more registers in process_{read,write}_regs()
...
- return EINVAL in process_sstep (temporary)
2000-04-13 15:51:26 +00:00
hubertf
f577078528
note that the installation software (sysinst) may have already set
...
rc_configured to YES in /etc/rc.conf, and that the drop to
singleuser mode may not happen.
remove special mentioning of 1.4.
2000-04-13 15:46:43 +00:00
msaitoh
9c13ab1d7c
KNF
2000-04-13 15:45:11 +00:00
msaitoh
ca4ca0111c
exports MACH and MACL registers, too.
2000-04-13 15:41:55 +00:00
msaitoh
9a41bed54e
move the Interrput Priority Level (IPL_*) definitions into MD part.
2000-04-13 15:36:09 +00:00
tsutsui
934ac598d8
Use "${OBJCOPY} -O binary" to strip a.out header.
2000-04-13 14:44:02 +00:00
mrg
fd85c1c4a2
avoid a potential memory leak.
2000-04-13 14:39:34 +00:00
itojun
8b8adc2ee4
bark if sdl_alen == 0. test code for KAME PR 235.
2000-04-13 14:32:53 +00:00
tsutsui
297d0a58b7
Disable DPRINTF().
2000-04-13 14:19:57 +00:00
itojun
18f9d539cc
even if nd6_nud_hint is called, do not change a neighbor's status
...
unless the old status is probably reachable (i.e. the link-layer address
has already been resolved).
KAME PR 235.
2000-04-13 14:11:06 +00:00
itojun
af4021abec
do not return icmp6 error against icmp6 error.
...
(this is due to a bug in header chain chasing)
2000-04-13 14:07:10 +00:00
is
200ab3da93
In skeyverify(), don't "restore" priority to 0, but restore it to the
...
previous priority. If we can't read the previous priority, leave it alone.
By Chris Jones, PR 4891.
2000-04-13 13:25:56 +00:00
tron
ebed203f6a
Remove pre curses V3 hack which causes a build failure.
2000-04-13 12:44:57 +00:00
is
ab879a6479
Copy M_BCAST and M_MCAST flags when fragmenting a packet (else
...
Multicast packets won't be send to the correct link layer address
by the interface driver).
By Artur Grabowski, PR 9772.
2000-04-13 11:48:07 +00:00
mrg
5792df1cf9
- do the "options<space><tab>" thing everywhere.
...
- disable COMPAT_AOUT.
- enable hme at sbus/pci
- enable bpp at sbus
- clean up esp attachments
- enable all xxphy's
- sync GENERIC & GENERIC64.
2000-04-13 11:23:14 +00:00
joda
1498ccad74
add com at cardbus
2000-04-13 11:21:18 +00:00
joda
39a71b22e4
add com at cardbus comment
2000-04-13 11:20:06 +00:00
joda
90bee16298
enable com at cardbus
2000-04-13 11:18:24 +00:00
joda
8fba568264
cardbus attachment for com devices (thanks to Chris Demetriou and
...
Darren Reed for constructive criticism and help with testing)
2000-04-13 11:17:53 +00:00
is
a11e71c0f9
Clarify language. Fixes PR 9708 by Matthew R. Green.
2000-04-13 11:14:42 +00:00
joda
3692f27c7d
regen
2000-04-13 10:13:12 +00:00
joda
69241946d8
add entry for a Xircom modem (as reported by Darren Reed)
2000-04-13 10:12:46 +00:00
joda
81bac16312
add CARDBUS_SUBCLASS_COMMUNICATIONS_SERIAL
2000-04-13 10:11:15 +00:00
mrg
fa13d97855
this does not need auxreg.h
2000-04-13 09:54:43 +00:00
mrg
b60fe7f45a
store all the physical address bits.
2000-04-13 09:53:49 +00:00
mrg
e7f3d69787
this does not need auxreg.h
2000-04-13 09:52:46 +00:00
mrg
542f08a422
add a version file.
2000-04-13 09:38:12 +00:00
mrg
f2ab01bf42
copy the "sparc" clean/cleandir target code, so that "cleandir" actually does a "clean"
2000-04-13 09:23:38 +00:00
itojun
b9c3c448e1
use getifaddrs to avoid alignment constraints in SIOCGIFCONF.
...
(do you have PR # for this? >lukem)
2000-04-13 09:12:16 +00:00
itojun
e9c5139f22
use getifaddrs, not SIOCGIFCONF. (should use pcap_lookupdev instead...)
2000-04-13 08:52:44 +00:00
mrg
09b8a5a646
for NetBSD 1.4 and above, use <sys/swap.h>
2000-04-13 08:34:40 +00:00
mrg
90bc324a8d
use <sys/swap.h>. should have happened years ago.
2000-04-13 08:29:56 +00:00
lukem
16ca0f7009
crank version
2000-04-13 08:23:52 +00:00
lukem
d54eded2a0
fixes from cgd:
...
* sanity check a length (otherwise certain bogus responses can crash ftp)
* allow a transfer encoding type of `binary'; certain firewall vendors
return this bogus type...
2000-04-13 08:17:56 +00:00
lukem
031f2ed4b1
s/strtoq/strtoll/ (the latter is standardised)
2000-04-13 08:13:30 +00:00
itojun
4e4447b130
use getifaddrs, not SIOCGIFCONF, to avoid complex alignment constraints.
2000-04-13 07:53:29 +00:00
itojun
4a58ed7b4f
use getifaddrs, not SIOCGIFCONF, to avoid alignment constraints.
...
TODO: maybe it's better to pass struct ifaddrs * to in{,6}_alias.
2000-04-13 07:39:57 +00:00
itojun
dbe85fd5ef
clarify in_alias() and in_status().
...
in_status() handles the whole inet address family. in_alias() handles
printout for single address (for both the primary address or an alias).
it is more consistent with, for example, the way at_status() is used.
2000-04-13 07:16:54 +00:00
jdc
43842e9bc2
Restore const after the Open Group decided it was OK.
...
Thanks due to Brett Lymn.
2000-04-13 07:07:33 +00:00
simonb
924021df91
Curses works - define USE_CURSES for BSD44 and don't try to do our own
...
thing (using curses internal data structures anyway!).
2000-04-13 06:07:06 +00:00
itojun
cf9ebfbd63
use getifaddrs, instead of SIOCGIFCONF.
...
sync with more-recent LBL 0.4, about loopback interface detection
(/^lo[0-9]?$/).
CAVEAT: with GENERIC kernel on laptops laptops, pcap_lookupdev would almost
always pick eon0 as the interface, and fails because eon0 has no bpf
attachment. we may want to change pcap_lookup{,dev} to check if the
interface has bpf attachment or not.
almost in sync with tcpdump.org source code tree.
2000-04-13 05:14:19 +00:00
itojun
b5a6411fbe
sprintf -> snprintf
2000-04-13 05:10:17 +00:00
itohy
0af9894f2f
[ktruss] Use fork(2), not vfork(2).
...
The child process of do_ktrace() does return and the stack is
changed by another function call (execvp()).
By using vfork() (my previous change), the execution of the parent
process resumes on the modified stack. Oops.
We could use vfork() carefully, but for now use fork().
Problem reported and investigated by Ethan Solomita <ethan@geocast.com>.
Thanks.
2000-04-13 01:27:53 +00:00
chs
c81c7aa367
always define PI_MAGIC so this compiles in all cases.
2000-04-13 00:44:19 +00:00
lukem
f408de971d
as this script is primarily for compatibility (with people's
...
rc.local), call it in a way that is compatible with the old behaviour:
* remove the stop case
* don't set $1="start" in the start case
xxx: it's debatable if this script should even exist, but i digress ;-)
2000-04-13 00:39:47 +00:00
simonb
aa52cffef6
Include "curses_private.h" to get function declarations.
2000-04-13 00:01:46 +00:00
simonb
d9726999aa
Nuke unused variables.
2000-04-13 00:01:03 +00:00
jdc
60bee59cbe
Add color.c, background.c, getyx.c.
2000-04-12 21:50:46 +00:00
jdc
70f4bbdc33
get...y() and get...x() routines.
2000-04-12 21:50:24 +00:00