this means we can no longer look at the vnode size to determine how many
pages to request in a fault, which is good since for NFS the size can change
out from under us on the server anyway. there's also a new flag UBC_UNMAP
for ubc_release(), so that the file system code can make the decision about
whether to cache mappings for files being used as executables.
foo_mountfs() to foo_mount(), to match the new mountroot API.
Also, for ext2fs and lfs, copy some restructuring from ffs to allow changing
file system parameters without specifying the device name.
(ntfs could use some more work.)
and just passes it on to the file system functions. This avoids opening and
closing the device several times.
Mentioned on tech-kern some time ago, IIRC. I've been running this for a
long time.
top bit in block addresses.
Also, change some daddr_t->int32_t casts (mostly as arguments to ufs_rw32(),
where they would get promoted anyway) to u_int32_t.
calls to ensure that the vnode lock state is as expected when the VOP
call is made. Modify vnode_if.src to set the expected state according
to the documenting lock table for each VOP. Modify vnode_if.sh to emit
the checks.
Notes:
- The checks are only performed if the vnode has the VLOCKSWORK bit
set. Some file systems (e.g. specfs) don't even bother with vnode
locks, so of course the checks will fail.
- We can't actually run with VNODE_LOCKDEBUG because there are so many
vnode locking problems, not the least of which is the "use SHARED for
VOP_READ()" issue, which screws things up for the entire call chain.
Inspired by similar changes in OpenBSD, but implemented differently.
* Rather than using mnt_maxsymlinklen to indicate that a file systems returns
d_type fields(!), add a new internal flag, IMNT_DTYPE.
Add 3 new elements to ufsmount:
* um_maxsymlinklen, replaces mnt_maxsymlinklen (which never should have existed
in the first place).
* um_dirblksiz, which tracks the current directory block size, eliminating the
FS-specific checks littered throughout the code. This may be used later to
make the block size variable.
* um_maxfilesize, which is the maximum file size, possibly adjusted lower due
to implementation issues.
Sync some bug fixes from FFS into ext2fs, particularly:
* ffs_lookup.c 1.21, 1.28, 1.33, 1.48
* ffs_inode.c 1.43, 1.44, 1.45, 1.66, 1.67
* ffs_vnops.c 1.84, 1.85, 1.86
Clean up some crappy pointer frobnication.
rarely in the normal case. (Note: This happens at reboot/shutdown time because
all file systems are unmounted.)
Also, for IN_MODIFY, use IN_ACCESSED, not IN_MODIFIED; otherwise "ls -l" of
your device node or FIFO would cause the time stamps to get written too
quickly.
setting those flags, it does not cause the inode to be written in the periodic
sync. This is used for writes to special files (devices and named pipes) and
FIFOs.
Do not preemptively sync updates to access times and modification times. They
are now updated in the inode only opportunistically, or when the file or device
is closed. (Really, it should be delayed beyond close, but this is enough to
help substantially with device nodes.)
And the most amusing part:
Trickle sync was broken on both FFS and ext2fs, in different ways. In FFS, the
periodic call to VFS_SYNC(MNT_LAZY) was still causing all file data to be
synced. In ext2fs, it was causing the metadata to *not* be synced. We now
only call VOP_UPDATE() on the node if we're doing MNT_LAZY. I've confirmed
that we do in fact trickle correctly now.
- Not enabled by default. Needs kernel option FFS_SNAPSHOT.
- Change parameters of ffs_blkfree.
- Let the copy-on-write functions return an error so spec_strategy
may fail if the copy-on-write fails.
- Change genfs_*lock*() to use vp->v_vnlock instead of &vp->v_lock.
- Add flag B_METAONLY to VOP_BALLOC to return indirect block buffer.
- Add a function ffs_checkfreefile needed for snapshot creation.
- Add special handling of snapshot files:
Snapshots may not be opened for writing and the attributes are read-only.
Use the mtime as the time this snapshot was taken.
Deny mtime updates for snapshot files.
- Add function transferlockers to transfer any waiting processes from
one lock to another.
- Add vfsop VFS_SNAPSHOT to take a snapshot and make it accessible through
a vnode.
- Add snapshot support to ls, fsck_ffs and dump.
Welcome to 2.0F.
Approved by: Jason R. Thorpe <thorpej@netbsd.org>
and tweak lkminit_*.c (where applicable) to call them, and to call
sysctl_teardown() when being unloaded.
This consists of (1) making setup functions not be static when being
compiled as lkms (change to sys/sysctl.h), (2) making prototypes
visible for the various setup functions in header files (changes to
various header files), and (3) making simple "load" and "unload"
functions in the actual lkminit stuff.
linux_sysctl.c also needs its root exposed (ie, made not static) for
this (when built as an lkm).
an _LKM.
This adds pools to the list of things that lkms must do manually
because they're set up with link sets. Not that there's anything
wrong with link sets, but that we need to try harder to remember that
lkms are second class citizens. Of a sort.
to pool_init. Untouched pools are ones that either in arch-specific
code, or aren't initialiased during initial system startup.
Convert struct session, ucred and lockf to pools.
VOP_STRATEGY(bp) is replaced by one of two new functions:
- VOP_STRATEGY(vp, bp) Call the strategy routine of vp for bp.
- DEV_STRATEGY(bp) Call the d_strategy routine of bp->b_dev for bp.
DEV_STRATEGY(bp) is used only for block-to-block device situations.
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.
This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes). It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms. Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.
On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
previous error conditions.
If "(flags & (V_WAIT|V_PCATCH)) == V_WAIT" the return value is always zero.
Ignore the return value in these cases.
From Darrin B. Jewell.
file system.
The function vfs_write_suspend stops all new write operations to a file
system, allows any file system modifying system calls already in progress
to complete, then sync's the file system to disk and returns. The
function vfs_write_resume allows the suspended write operations to
complete.
From FreeBSD with slight modifications.
Approved by: Frank van der Linden <fvdl@netbsd.org>
mv MNT_GONE, MNT_UNMOUNT and MNT_WANTRDWR to this field
additonally add mnt_writeopcountupper and mnt_writeopcountlower fields
in preparation for pending write suspension support work
bump kernel version to 1.6ZD
panics in ffs_full_fsync because v_specmountpoint requires that the NULL
v_specinfo be followed.
Tidy up in the same order in all error paths so compiler can merge the
code sequences.
Fixes PR kern/22419
* Remove the "lwp *" argument that was added to vget(). Turns out
that nothing actually used it!
* Remove the "lwp *" arguments that were added to VFS_ROOT(), VFS_VGET(),
and VFS_FHTOVP(); all they did was pass it to vget() (which, as noted
above, didn't use it).
* Remove all of the "lwp *" arguments to internal functions that were added
just to appease the above.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
- Under chroot it displays only the visible filesystems with appropriate paths.
- The statfs f_mntonname gets adjusted to contain the real path from root.
- While was there, fixed a bug in ext2fs, locking problems with vfs_getfsstat(),
and factored out some of the vfsop statfs() code to copy_statfs_info(). This
fixes the problem where some filesystems forgot to set fsid.
- Made coda look more like a normal fs.
64 bit block pointers, extended attribute storage, and a few
other things.
This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.
Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.
mycroft