Commit Graph

2871 Commits

Author SHA1 Message Date
thorpej
8e8eed4ba7 Create RX DMA maps with ALLOCNOW. These maps are essentially always
loaded, and recovering from a resource shortage error is much harder
in the receive case.
1998-02-07 21:13:34 +00:00
thorpej
f955aa86e5 Properly handle error conditions from bus_dmamap_load_mbuf(). 1998-02-07 20:40:35 +00:00
augustss
ae3e754e0b Newly generated version. 1998-02-07 20:07:37 +00:00
augustss
6d9b48ac1d Fix typo, and commit in the right order. 1998-02-07 20:05:25 +00:00
augustss
c78e3507ba Add the AGP device in the 82443LX. 1998-02-07 19:32:37 +00:00
thorpej
208d979613 Use BUS_DMA_NOWAIT where appropriate. Don't create DMA maps with
BUS_DMA_ALLOCNOW.
1998-02-07 10:27:12 +00:00
cgd
f1fa872906 don't forget class spec 1998-02-07 00:49:19 +00:00
cgd
5942e0ff3d initial implementation of OFW ISA bus code and attachments for a few
devices.  Still a bit rough, but works well enough.  Requires a bunch of
machine-dependent glue (since this is, in effect, a MI bus bridge).
1998-02-07 00:46:45 +00:00
thorpej
e08a44b196 - Perform all necessary bus_dmamap_sync() operations.
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-06 23:06:44 +00:00
matt
8098a443f0 A version of the de driver which does bus_dma. Note that it has not been
tested on any other platform other than i386.  Use of bus_dma(9) can be
turned by defining TULIP_BUS_DMA_NOTX and TULIP_BUS_DMA_NORX.  These allow
one to determine if the problem is in the transmit or receive path.
A problem reported by mycroft is also fixed.
1998-02-06 20:57:12 +00:00
thorpej
fd01cb624f Allow a ccd component to be on any partition type. 1998-02-06 08:13:07 +00:00
enami
9d13bc6e0e Restore system priority level before return from comopen(). 1998-02-06 03:25:34 +00:00
pk
0725302eac vme_bus_probe() takes an `offset' argument. 1998-02-06 00:22:41 +00:00
pk
40b15d9230 Add `offset' argument to probe routine. 1998-02-06 00:21:49 +00:00
mrg
1a8c7604f4 initial import of the new virtual memory system, UVM, into -current.
UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code.  i provided some help
getting swap and paging working, and other bug fixes/ideas.  chuck
silvers <chuq@chuq.com> also provided some other fixes.

this is the rest of the MI portion changes.

this will be KNF'd shortly.  :-)
1998-02-05 07:59:28 +00:00
thorpej
0392bc60a1 Fix the FXP_TXDESCOFF() macro. 1998-02-05 07:31:52 +00:00
sakamoto
a2b24d5571 Change "__BUS_SPACE_NEED_STREAM_METHODS" to "__BUS_SPACE_HAS_STREAM_METHODS". 1998-02-04 14:13:40 +00:00
thorpej
ec6c5c10d7 Add necessary bus_dmamap_sync() calls for memory mapped with the COHERENT
hint, per bus_dma(9).
1998-02-04 08:26:42 +00:00
thorpej
8abe76d2f0 Add offset and length parameters to bus_dmamap_sync(), used for specifiying
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
pk
3995590109 Use `offsetof()'. 1998-02-04 01:19:23 +00:00
pk
749d6cf61d Account for changed vme_bus_probe() args.
Fix vme_ie_write24() to use bus_space_write_2() in stead of poking
directly into the bus handle.
1998-02-04 00:59:02 +00:00
pk
62f18b7ff0 Use vme_bus_probe() callback for device detection.
Use correct VME modifier (A16+D32 instead of A32).
1998-02-04 00:55:52 +00:00
pk
47afb35008 Use vme_bus_probe() callback for device detection. 1998-02-04 00:54:27 +00:00
pk
c7a01456a0 Add a callback function to vme_bus_probe(), for device-specific probes
using mapped device space.
1998-02-04 00:50:44 +00:00
thorpej
296d96f42c Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
BUS_DMA_COHERENT.
1998-02-04 00:38:50 +00:00
pk
c1e336fc0b Erase a spurious structure definition. 1998-02-04 00:38:34 +00:00
thorpej
a7c5c1ef3c Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
cgd
819d730e25 s/of_nodename/of_packagename/. Eventually, we'll probably want something
similar for instances.
1998-02-03 16:58:25 +00:00
is
77b3a5be15 Put a debugging printf inside #ifdef IYDEBUG ... #endif. 1998-02-03 16:22:01 +00:00
sakamoto
7052e9949b Change the data access busification functions to
the "stream" busification functions.
In the architecture as the BeBox(CPU is big endian, have ISA bus),
These methods would be used where "raw" data needs to {read,write,set}
unchanged.

Add #ifndef __BUS_SPACE_NEED_STREAM_METHODS (define that on NetBSD/bebox),
if not define __BUS_SPACE_NEED_STREAM_METHODS,
define "stream" busification functions to normal busification functions.
1998-02-03 04:26:45 +00:00
cgd
9c46cdbef5 in ofbattach(), don't both doing an ofbprint() by hand if the root node.
The old ofbprint() wasn't particularly good (it forced the root node
to have a 'name' property, which apparently violates the OFW spec), and
the new one (though it normally prints more useful information) has
nothing useful to say about the root node.  It's not clear to me that
'ofroot' should exist at all.
1998-02-03 00:43:46 +00:00
cgd
9bffcfef75 change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
instead, and define that on NetBSD/alpha and NetBSD/arm32.
1998-02-02 23:01:02 +00:00
cgd
c2f42b2213 Implement a flag to indicate that the driver attached correctly.
This is useful in the case where an attachment's probe routine
verifies that there is indeed hardware present but something goes
"wrong" in the attach causing the device to be unusable.  (Without
keeping track of this, in that case incorrect ports could be
accessed or uninitted pointers could be deferenced on open or at
other times.)
1998-02-02 22:54:55 +00:00
cgd
ac4b4ec31d make ofbprint() use of_nodename(). cleanup. 1998-02-02 22:00:07 +00:00
cgd
5169537359 add of_nodename(), a function to stuff the last component of a node's
name into a caller-provided buffer (helpful for generating
autoconfiguration output).  Also, other minor cleanup.
1998-02-02 21:56:16 +00:00
cgd
c9249eced0 add a prototype for of_nodename(), a function to stuff the last
component of a node's name into a caller-provided buffer (helpful
for generating autoconfiguration output).
1998-02-02 21:55:23 +00:00
thorpej
69d33afe72 Prototype OF_getproplen(). 1998-02-02 21:00:13 +00:00
marc
b01ada14d9 fix up the power management code to dtrt with the 3c562A mfc card (and
hopefully the other variants)
1998-02-01 23:52:25 +00:00
marc
6b68f8b698 use an array of serial devices, not a cascaded if
add power management support
1998-02-01 23:50:52 +00:00
marc
3a3ac64f4f rewrite mfc intr management not to use unexported spl* functions
add mfc iobase/iosize support
 add power management support
1998-02-01 23:49:02 +00:00
marc
cdc3013464 whitespace changes for readability 1998-02-01 23:38:44 +00:00
marc
57e56a34bc add state to struct pcmcia_function for mfc iobase/iosize support 1998-02-01 23:38:06 +00:00
marc
5c17882e45 move pcic_wait_ready from i82365var.h to i82365.c 1998-02-01 23:36:23 +00:00
marc
63f5e2bbc3 move pcic_wait_ready to i82365.c 1998-02-01 23:33:51 +00:00
marc
1d4b77e754 split com_attach_subr into attach stuff and per-open initialization stuff
add timeouts to all splserial() while loops so bugs elsewhere don't cause
the com driver to wedge the machine
 add power management support
1998-02-01 23:33:01 +00:00
marc
a71698f108 add power management hooks to softc 1998-02-01 23:30:49 +00:00
kleink
fa75c2d647 Fix two harmless typographical errors in a comment. 1998-02-01 19:25:44 +00:00
pk
f3ee364e31 * Make sure the `ECB_NEXUS' flag accurately reflects the existence of
an initiator/target nexus and thus mark the correct queue (if any) a
  command is on.

* If a disconnected command times out, just leave it on the nexus queue
  and do nothing (for now). I need yet to decide on the strategy to
  follow in this case.  Note: we used to move the command to the `ready'
  queue and then do nothing, which is worse.
1998-01-31 23:37:51 +00:00
christos
5ba817c967 Don't hardcode the interrupt type; use what the pnp config provided to us. 1998-01-31 21:31:35 +00:00
christos
1caaa1f520 PR/4883: Andreas Wrede: Check for wildcard mem address not io ports. 1998-01-31 11:23:35 +00:00